Dan,
It has been a couple years since I programmed the radio, but I think you have to set up one for Memory rag and one for frequency.
On Fri, May 17, 2019 at 18:14 Dan Jolley danjolley@hotmail.com wrote:
John, is that UV-5X3 set up like that normally, or do you have to configure it with Chirp or the Menu settings?
*From:* chirp_users-bounces@intrepid.danplanet.com < chirp_users-bounces@intrepid.danplanet.com> on behalf of John Tibbetts < w9apx.hamradio@gmail.com> *Sent:* Friday, May 17, 2019 5:58 PM *To:* Discussion of CHIRP; Tom Consodine, ND5Y
*Subject:* Re: [chirp_users] UV-82HP display question
Dan,
BaoFeng has one radio that will sync display (shows memory tag name, and frequency) - the UV-5X3, which is a tri-bander (144/220/440).
John, W9APX
On Fri, May 17, 2019 at 15:12 Tom Consodine, ND5Y via chirp_users < chirp_users@intrepid.danplanet.com> wrote:
You can't do that. It's impossible to do that either with Chirp or from the radio keypad. The UV-82 is not capable of syncing the displays.
Tom ND5Y
Now here's where I get lost. If you scroll up or down, the two won't match. And if you scan, you'll be way off. How do you keep 'em in sync? Chris Knowles, N1CAK
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John at w9apx.hamradio@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John at w9apx.hamradio@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com