On Nov 9, 2011 6:50 PM, "Gerrit Polder" <gerrit.polder@solcon.nl> wrote:

Dan,

here is some additional information for the programming cable guide.

For the Baofeng UV-3R is a USB cable available with a prolific chip.
Unfortunately the latest driver from prolific does not work with this cable.
You have to use a weird old driver used for GPS equipment in the past (PL2303_Prolific_GPS_AllInOne_1013.exe).
It does not work with Mac OS X, don't know about Linux.

for this reason I replaced the interface with a SparkFun FTDI Breakout board (http://www.sparkfun.com/products/9716).
This one works like a charm. Furthermore I also can program my BF-U3 using Windows 7. The old cable could only be used with Windows XP.

I removed the cable from the prolific board and soldered it to pin headers which fit in the header connecter of the SparkFun board. For what its worth: black to ground, green to tx, red to rx.

kindly,
Gerrit.



_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users