The "+-" on the display is there to show that an offset is programmed, but not which direction it actually is. Goofy, but that's what it is.
On Thu, Feb 15, 2024 at 8:06 AM Rich NE1EE TheDustyKey@imaginarian.org wrote:
I have the BaoFeng UV-5RTP and the BTECH UV-5X3. I program them with chirp, and nary a problem. The images that show both +- on at the same time give me pause. I don't have any experiences with Baofeng, Kenwood, Icom, and Yaesu that has them both on. So...is there some way to do a factory reset on the Baofeng UV-5R8W? Offhand I'd not trust any operation unless I felt sure that the radio was operating 100% iaw mfg intent.
And...a chirp list related note...I had saved the original email for this thread, because of the images, but when I looked it up on the chirp mail list, all that I saw were the replies.
73 Rich NE1EE
On 2024-02-14 10:35:, A Boer wrote:
Good day, CHIRP Users! I am having some trouble using CHIRP with some
new radios I am trying to program. Simply put, I cannot get the repeater channels to work. I downloaded the .img file from one radio into CHIRP, copied and pasted the repeater configuration from the CHIRP list of repeaters and pasted it into my .img file, then uploaded the .img file into both radios. The radios will not talk to each other through the repeater. I have gory details with screenshots and radio display pictures in the attached .jpg files. If anyone has the time to review those details and has some ideas on how to fix this problem, I would certainly appreciate the feedback. Thank you for your time.
Alex Boerner KJ7CPZ
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John Wuest at jhwuest@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com