Jim,
On May 2, 2015, at 4:12 PM, Jim Unroe rock.unroe@gmail.com wrote:
On Sat, May 2, 2015 at 1:57 PM, Nicholas Papadonis npapadonis@yahoo.com wrote:
Folks,
Chirp 0.4 and 20141215 version both seem to have an issue with PL tone setting. When I use the drop down to select a PL for Tone and then a different one for ToneSQL, one of the two PLs is either set to the default 88.5 or incorrect. I’m using a Baofeng UV-5R however find this behavior occurs even when working with CSV files. For instance, I have the following CSV file:
Location,Name,Frequency,Duplex,Offset,Tone,rToneFreq,cToneFreq,DtcsCode,DtcsPolarity,Mode,TStep,Skip,Comment,URCALL,RPT1CALL,RPT2CALL 4,N2JDW,147.150000,-,0.600000,TSQL,136.5,123.0,023,NN,FM,5.00,,,,,,
I then import it and results in the following:
4,N2JDW,147.150000,-,0.600000,TSQL,123.0,123.0,023,NN,FM,5.00,,,,,,
As you can see, the first Tone value was overridden after the import. It should be 136.5, however is 123.0. I find similar behavior when saving a Chirp image files and loading it back it. Therefore this impacts more then just CSV import.
Appreciate any insight here if this is a bug or not.
Thanks, Nick KB1GZN
Nick,
If you would click view and enable "Hide Unused Fields" you might get a better feel for how you set the tones using CHIRP.
When you set Tone Mode to Tone, the Tone column is used to set the TX CTCSS tone. The 88.5 tone value in the ToneSql column is unused and ignored.
When you set Tone Mode to TSQL, the ToneSql column is used to set bot the TX CTCSS tone and RX CTCSS tone. The 88.5 default tone value (or any other value you try to change it to) in the Tone column is unused and ignored
With "Hide Unused Fields" enabled, the unused columns would have been blank to indicate they are unused.
To set different tone for TX and RX you would set Tone Mode to Cross and Cross Mode to Tone->Tone. Only when CHIRP is set this way are both Tone and ToneSql columns used at the same time.
So set Tone Mode=Cross Then set Cross Mode=Tone->Tone And finally set your TX tone (Tone column) and RX tone (ToneSql column)
Setting Cross mode resolved the issue. Thanks for the insight.
Nick
Once this is done, you can export it to a CSV file to "see" what it should look like when it is properly configured.
You may also want to look at the following guides.
Understanding CHIRP's Columns http://chirp.danplanet.com/projects/chirp/wiki/MemoryEditorColumns
CHIRP Programming Reference http://kc9hi.dyndns.org/uv5r/programming/CHIRP%20Guide.pdf
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com