Having been messing with ttyUSBx devices recently, for repeatable paths based on USB bus attachments, check out /dev/serial/by-path which is especially helpful in the case where you have multiple USB2Serial adaptors.
Regards,
Jon G7VRI On 22 Jan 2016 21:27, "Pavel Milanes (CO7WT)" co7wt@frcuba.co.cu wrote:
A little cheat sheet for linux serial devices:
*/dev/ttyS0, /dev/ttyS1, etc* Real native Motherboards ports, sort order is from the IRQ number
*/dev/ttyUSB0, /dev/ttyUSB1, etc* The majority of the USB serial adapters, sort order is the plug in order.
*/dev/ttyACM0, /dev/ttyACM1, etc* Some USB serial adapters (mostly based on PIC or AVR MCU) sort order is the plug in order
73, CO7WT.
El 22/01/16 a las 10:42, jon escribió:
I spent a lot of time trying to get my Linux computers to read from my Wouxun radio using both the Wouxun programming cable and an Ftdi1232 board and got a serial port error message. My mistake was selecting dev/ttyS0. You need to select dev/ttyUSB0 way down at the end of the tty list. _______________________________________________ chirp_users mailing listchirp_users@intrepid.danplanet.comhttp://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com