hi,
tried, but the jetstream also jumbles up the memory order.
something i did find as the memory file its own software made was in plain text, so i was able to understand that, and duplicate bank a to bank b ok.
________________________________ From: chirp_users-bounces@intrepid.danplanet.com chirp_users-bounces@intrepid.danplanet.com on behalf of Brian Dickman brian.maybe@gmail.com Sent: 14 March 2017 16:00 To: Discussion of CHIRP Subject: Re: [chirp_users] purchase of a leixon vv-898s - memories
Hey Neil,
Try downloading using the Jetstream JT-270mh profile. That includes support for the dual-bank a/b system that the newer firmware 898 uses.
I think we need to add some extra aliases around this, because it's very non-obvious which profile you need to use. If nothing else, there are bits in the download that indicate firmware version and we could provide a check and warning message when the wrong one is used on this series of radios.
-- Brian
On Tue, Mar 14, 2017 at 1:18 AM, Neil B <ne.b@hotmail.co.ukmailto:ne.b@hotmail.co.uk> wrote:
i did try that but made no diference.
i play a bit more today, now i programs 30 memorys with its own programmer, i read in chirp and memorys read randomly into random locations on each download.
i now fine i think mine is a newer varient? a 898st. not sure what the 't' gives me, but that could be a prob.
i think the radio is odd. in operation, the 199 memorys are NOT shared between a or b. each has its own set of 99.
it seels a poor radio compaired to the likes of the other cheapos as the baofengs that i have found very good like the big 3 i/k/y lot.
________________________________ From: chirp_users-bounces@intrepid.danplanet.commailto:chirp_users-bounces@intrepid.danplanet.com <chirp_users-bounces@intrepid.danplanet.commailto:chirp_users-bounces@intrepid.danplanet.com> on behalf of Jim Unroe <rock.unroe@gmail.commailto:rock.unroe@gmail.com> Sent: 13 March 2017 21:22 To: Discussion of CHIRP Subject: Re: [chirp_users] purchase of a leixon vv-898s - memories
On Mon, Mar 13, 2017 at 3:10 PM, Neil B <ne.b@hotmail.co.ukmailto:ne.b@hotmail.co.uk> wrote:
i did yes. but with a lot of playing, it just had empy mem slots.
i am programming it with the silly software it came with but even when thats written ok to radio and used, when read ok in chirp, no mems.
I don't remember what the difference is between the S and E models, but I think it changes the way the channels are stored in the radio. Have you tried reading the radio with the VV-898E to see if the channels are retrieved?
Jim _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.commailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users chirp_users -- Discussion of CHIRP - intrepid.danplanet.comhttp://intrepid.danplanet.com/mailman/listinfo/chirp_users intrepid.danplanet.comhttp://intrepid.danplanet.com This list is for discussion of CHIRP use, issues, and beta releases. At any point, the latest daily build will be available here: http://trac.chirp.danplanet.com ...
This message was sent to m1cfk at ne.b@hotmail.co.ukmailto:ne.b@hotmail.co.uk To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.commailto:chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.commailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Brian Dickman at brian.maybe@gmail.commailto:brian.maybe@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.commailto:chirp_users-unsubscribe@intrepid.danplanet.com