OK...
Last night I got the OEM Kenwood programming software running using DOSBOX and it worked great with both radios (I have 2). Of course, I would still like to get Chirp working. But, this proves that the programming cable and radios are working correctly.
I have attached 2 additional debug logs. One using the TK-760G profile in Chirp and one using the TK-762 profile.
The 760G profile seemed to do even less than the 760 profile as it didn't even put the radio in programming mode.
The 762 profile appears to have behaved exactly as the 760 profile did - radio goes into programming mode but Chirp errors out.
Mike
---- On Wed, 17 Mar 2021 17:42:34 -0500 Jim Unroe rock.unroe@gmail.com wrote ----
On Wed, Mar 17, 2021 at 6:36 PM Mike Allred mailto:mike@mallred.com wrote:
Thanks Jim.
I have attached the debug log.
Mike
Mike,
There was no response from your radio. Try the same thing with the "G" selection.
Jim _______________________________________________ chirp_users mailing list mailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Mike at mailto:mike@mallred.com To unsubscribe, send an email to mailto:chirp_users-unsubscribe@intrepid.danplanet.com