Hi Rich,
I am glad the driver link helped. This video helped me to know what frequencies I needed, and how to add them.
https://m.youtube.com/watch?v=MEpBo5lixsw
73 Dawn
On Wed, Dec 30, 2020, 12:49 PM Nigel A. Gunn G8IFF/W8IFF nigel@ngunn.net wrote:
On 30/12/2020 13:41 kramarik@earthlink.net wrote:
First, thanks to everyone for quick and helpful feedback.
You were all correct in the missing driver being the problem, although I never had the yellow exclamation mark. Dawn’s link helped to load the appropriate driver, which immediately created a COM3 port option in Chirp. That also allowed me to clone and download the original IMG file into Chirp, which I have saved. I now can see the format to use to populate the frequency fields, which has generated a couple of new questions:
- What frequencies should I load into memory slots?
You load whichever frequency you desire to listen to.
- If I don’t load a frequency into a memory slot, does that mean I
can’t RX/TX on that frequency?
You can still Rx/Tx using the radio's VFO.
- How do I know what frequencies to use for repeaters in my area (or
outside of my area)?
Look in the on line repeater directory or contact your local amateur radio club.
- How do you assign a NAME to a channel in Chirp?
Just type it in. Name can be anything you choose.
- Can you recommend a good source for learning the process to
license/certification?
That depends which country you live in.
Once again, appreciate the help/guidance!
BTW, this is for a mobile Mirkit Baofeng UV-5R MK5 radio.
Rich
*From:* chirp_users-bounces@intrepid.danplanet.com < chirp_users-bounces@intrepid.danplanet.com> *On Behalf Of *John *Sent:* Wednesday, December 30, 2020 12:26 PM *To:* chirp_users@intrepid.danplanet.com *Subject:* Re: [chirp_users] BTech 5X3
Rich,
Welcome to the discussion!
Firstly, which radio are you trying to program?
Secondly, does the "FT232R USB UART" device under "Other Devices" have a yellow exclamation mark next to it? If so, then the driver may not be installed or the cable is malfunctioning in some way. However, the Mirkit cable is advertised as having a genuine FTDI chip inside and assuming that the cable is genuine, the likelihood of that possibility is significantly reduced. Windows normally detects and installs FTDI drivers automatically through Windows Update. At this point I would say to check that Windows Update is enabled and working, but since you have already tried the cable on different PCs with the same result, that would tend to rule out a PC specific problem. There are two types of drivers for FTDI chips - D2XX and VCP. The former installs as a USB device only, the latter as a *V*irtual *C*OM *P*ort. I am not familiar with Mirkit cables, but if you have no yellow exclamation mark and since the cable has apparently been recognized as an FT232R device, then I am wondering whether the automatic install might have installed the D2XX drivers for some reason. You could try installing the VCP drivers which are available directly on the FTDI Chip website:
https://www.ftdichip.com/Drivers/VCP.htm
If that still doesn't work, then the cable or may indeed be faulty.
John. Ch.
Kramarik@Earthlink.net wrote on 30/12/2020 16:20:
Hello and hope it is OK to join this discussion, which I just signed up for this week. Like Dawn, I am new to HAM radio (as of Xmas) and trying to set up a mobile unit. Main problem is setting up IMG via PC and Chirp software, using a Mirkit FDTI cable. Instructions seem pretty clear, but I can’t get cloning to work. Here are background details:
- PC’s are new Dell desktop and MS Surface laptop, both using Windows
10 2. Tried *all* ports (2.0 & 3.0) on both PC’s and get error message “Radio not responding” when trying to clone (download) 3. W10 Device Manager shows an “FT232R USB UART” device under “Other Devices”, *not* under COM ports 4. Due to #3, I cannot select any COM port that corresponds to the cable (assuming the FT232R USB UART is the cable), in Chirp software 5. Possibility of bad cable based on same outcome with different PC’s?? 6. Any way to force cable installation under COM ports, instead of Other Devices??
If I could get the cable connection to work with Chirp software, I think the rest of the setup for channels/frequencies is pretty straightforward, although I may need some help with the “operational” settings. I am looking forward to getting the appropriate HAM license/certification to use this radio and appreciate any help/guidance you can provide.
Rich
*From:* chirp_users-bounces@intrepid.danplanet.com chirp_users-bounces@intrepid.danplanet.com chirp_users-bounces@intrepid.danplanet.com *On Behalf Of *John *Sent:* Wednesday, December 30, 2020 6:14 AM *To:* chirp_users@intrepid.danplanet.com *Subject:* Re: [chirp_users] BTech 5X3
Glad you got it working by plugging into a port at the back but I wonder whether this is one of those weird USB3 port compatibility issues? Is the port at the side blue, vs black at the back?
John. Ch.
Dawn K wrote on 30/12/2020 02:06:
I apologize, I tried a different USB port and it worked. I was using the ones on top of my computer instead of the ones in the back for convenience. Thank you for your help. Have a great evening.
On Tue, Dec 29, 2020 at 8:02 PM Jim Unroe rock.unroe@gmail.com wrote:
Dawn,
On Tue, Dec 29, 2020 at 8:56 PM Dawn K fnordphoenix@gmail.com wrote:
Hello,
I am sorry to bother everyone again but I am uncertain how to proceed. I
downloaded and installed the latest drivers for my cable, Windows 10 is recognizing it. But now I get an "error reading data. Not the amount of data we want." I have looked for trouble shooting but all I can find is the updating the driver or an issue with the cable which isn't my issue. I have tried multiple times. I have made sure the cable clicks in, I have tried pulling the cable out a little, but I get the same error.
Are you choosing the correct COM port? Which Vendor and Model are you choosing? Attach the debug.log file.
Instructions for how to locate the debug.log file can be found here: https://chirp.danplanet.com/projects/chirp/wiki/How_to_report_issues
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to fnordphoenix@gmail.com at fnordphoenix@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to John Chajecki at subs@qcontinuum.plus.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
-- John.
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to John Chajecki at subs@qcontinuum.plus.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
-- John. _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net www http://www.ngunn.net
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to fnordphoenix@gmail.com at fnordphoenix@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com