Wondering how to remove the Reverse feature in Channel Mode, by short pressing the * key, on a Baofeng UV-5R, using Chirp 0.4.0. Enabling Dual Watch doesn't seem to do it.
Thanks
Tapping the [*SACN] key is a toggle for "reverse mode'. Taping it will enable it (an "R" will appear in the upper status display). Tapping it again will disable it (the "R" will disappear).
TDR doesn't affect the "reverse mode" function unless your firmware is BFB251 or older. On these older firmwares, TDR must be set to OFF for the "reverse mode" function to work. Other than this bug, programming software has no control over this feature.