Hello,
Just realizing I should have reported this info a month ago, here's the specs of getting chirp to work with my Baofeng, not listed on the chirp website.
RADIO
Model: Baofeng BF-UVB3
Power: 8W 7.4V
Freq. Range: 136-174/400-520MHZ
Battery: 3800mAh 7.4V
CHIRP
Version: daily-20190429 GTK 2.24.32 PyGTK 2.24.0 Python 2.7.16
OS: Ubuntu 18.10 GNOME 3.30.1 64-bit
Sent from ProtonMail mobile
-------- Original Message -------- On May 8, 2019, 10:44 AM, Dan Clemmensen wrote:
The list on the CHIRP homepage is (apparently) generated automatically from the daily CHIRP build, so if the radio is not here, then the CHIRP code does not know about it. Within the CHIRP code, there is (supposed of be) an "alias" defined for any radio that has the IDENTICAL programming interface with another radio. "identical" means completely indistinguishable, including any internal version or ID string.
If a radio is "almost" identical, then the CHIRP code needs to be updated so it knows the differences. If the radio is truly identical, then you can program it using the original name or any of the aliases. If you think you radio might be identical and you are very brave, you can try it: please report the result here. If you think it may be a variant, please consider learning how to "sniff" the protocol, and report the result here. Please do not try any of this unless you are willing to risk temporary or permanent problems with your radio up to and including totally bricking it. (very unlikely but you must take assume the responsibility for this.)
On Wed, May 8, 2019 at 11:33 AM Ernesto Xload xload.es@gmail.com wrote:
A lot of thanks Dan, I asked because I think that would be compatible with other Kenwood model.
73
El mié., 8 may. 2019 a las 20:29, Dan Clemmensen (danclemmensen@gmail.com) escribió:
Please look at the CHIRP Home Page: https://chirp.danplanet.com/projects/chirp/wiki/Home No, it's not supported. Also look at the FAQ (second FAQ question) https://chirp.danplanet.com/projects/chirp/wiki/FAQ
On Wed, May 8, 2019 at 11:21 AM Ernesto Xload xload.es@gmail.com wrote:
Hello,
Is Chirp capable of programming Kenwood TH-K40E?
Best Regards.
Ernesto Xload _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dan Clemmensen at danclemmensen@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Ernesto Xload at xload.es@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dan Clemmensen at danclemmensen@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com