I have three "identical" UV5R's. I use the same image file and get the same error on 2 of them. Every thing seems to download to the radios anyhow. I think it is more of an FYI than an error message.
However what has been said above is the right way to do it.

Dennis M. Wage (W9BOQ)

245 Corum Hill Road


On Tue, Nov 5, 2019 at 1:59 PM John La <JohnLa@usa.net> wrote:

Joshua,
You appear to have mismatched firmware between radios (even with the same model number).
This is not uncommon.
You must do a Download from Radio from the second radio to create a new template for that radio.
Then copy paste the channels from one template to the other.

John

www.Miklor.com

 

 

From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Joshua White
Sent: Tuesday, November 5, 2019 10:41 AM
To: chirp_users@intrepid.danplanet.com
Subject: [chirp_users] FW: Problem with cloning to my radio

 

 

 

From: Joshua White
Sent: Tuesday, November 5, 2019 10:33 AM
To: chirp_users@intrepid.danplanet.com
Subject: Problem with cloning to my radio

 

Hey so I programmed my first radio identical to this one (Baofang UV82L) and it worked fine. But this second one when I try to clone all my channels on to it, it reads this: An Error has occurred, The upload was stopped because the firmware version of the image ( N822413N822413) DOES NOT MATCH that of the radio.

 

Please help

 

 

 

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Dennis Wage at dwage@dwage.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com