Thanks guys,
This is direct, no repeater involved. This image is a screenshot of what I have, which does not work?
http://s33.postimg.org/rabqkiulr/chirp.jpg
Jeff
On Wed, Jun 8, 2016 at 9:38 AM, Jim Unroe rock.unroe@gmail.com wrote:
On Wed, Jun 8, 2016 at 9:26 AM, Jeffrey fongemie@gmail.com wrote:
Hey everyone,
I'm pretty new to radios in general, and more so programming them, but
I'll
do my best to get the terminology right.
I'm trying to use CHIRP to program a UV-5R so that it can communicate
with a
Motorola radio on a certain frequency. The Motorola is set to use
151.9400
with a PL tone of 67.0 for both send and receive.
PL is the same as CTCSS correct?
On the UV-5R, I've got Tone Mode set as TSQL and ToneSql set to 67.0 -
and
it does not work? The two radios are not communicating. Am I missing something? Something special about Motorola PL tones? Should be a
standard
right?
Thanks for any advice.
Jeff
PL is short for Private Line which is Motorola's trademark for CTCSS. Like Kleenex or Scotch tape, PL is often used generically for CTCSS.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to fongemie@gmail.com at fongemie@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com