I went through the same thing a while ago and was not able to get Chirp to talk with my FT60.

Finally did the dance of pushing this button and so on and finally got the ZT-V68 software that came with my programming cable to work but it was not easy.

Feel that now that I know the sequence needed to get the FT-60 to work that the Chirp might work but without the proper sequence doubt it.

Joe A

On Sun, Apr 5, 2015 at 4:48 AM, James Baughn <geek@jamesbaughn.com> wrote:

I am using the cable from RT Systems to attach my FT60R to the system.
When the cable is connected, Port /dev/ttyUSB0 is displayed. If the
cable is not connected, no port is displayed in the radio box.
However, using the method for which the RT System windows program uses,
I get a time out on the Download procedure.
The method used is turn the FT60R on holding the [Moni/TCall] key. The
dial is rotated to CLONE. The [FW] key is pressed so CLONE blinks and
comes back. The OK button is selected and the transfer should take place.

Any ideas?

Jim
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com