Hi Jim, Thanks for looking it over for me. I have four banks of 11 meter at the end part for RX, and they get loaded up okay. Due to the poor access with a screenreader, I can't really do anything with the settings in Chirp, but when I downloaded from the radio into the Kenwood software, I can affect all the settings, and I checked the 10 memories, like they were 10 different banks of memory, I guessed, I don't know why they have that there. Glenn ----- Original Message ----- From: "Jim Unroe" rock.unroe@gmail.com To: "Discussion of CHIRP" chirp_users@intrepid.danplanet.com Sent: Tuesday, August 09, 2022 2:53 PM Subject: Re: [chirp_users] Kenwood Image
On Tue, Aug 9, 2022 at 3:46 PM K0LNY_Glenn glenn@ervin.email wrote:
It's odd, every time I import my CSV file, it leaves out channels 0 through 3, and 11 through 24. 0 is NOAA, and 1 through 3 are MURS channels, and 11 through are FRS channels. Is it normal to leave these out?
No. This is not normal. Like I have been saying, you probably have a bad CSV file. Send it to me and I can either fix it, tell you what is wrong with it or both.
Jim _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to K0LNY at glenn@ervin.email To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com