Two COM port numbers are assigned to the [USB] connector. One of them is “USB1,” used for cloning and CI-V operation. The other one is “USB2,” whose function is selected in “USB2 Function” item of the “Connectors” Set mode. (p. 6-8)
On Wed, 27 Jul 2022 at 02:58, Jim Unroe rock.unroe@gmail.com wrote:
On Tue, Jul 26, 2022 at 4:04 PM Michael Nadler KI7QIB michael.nadler@gmail.com wrote:
ICOM 7100 connected to Linux system via the mini-USB port. FLRIG can
control the radio through that interface.
Running CHIRP 0.3.0dev, when I try to download from the radio via
/dev/ttyUSB0, I get a pop-up error message: unicode strings are not supported, please encode to bytes: <<gibberish characters>>>".
Are there specific settings I need to have set on the ICOM?
Is CHIRP able to interact with the ICOM-7100 via the mini-USB port? Do
I have to use the RT-Systems FTDI cable into the audio port?
P.S. I also tried running Windows CHIRP daily-20220408. Download from
radio gets "error" in every entry.
-- Michael Nadler KI7QIB
I know that when I used CHIRP on my IC-7300, I used a different cable than I did when I used FLRIG. I also had to edit a setting in the radio for CHIRP and change it back for FLRIG.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Tony Ling at tonyg7txu@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com