Following the recommendation rick@rick-GC667AA-ABA-SR5130NX / $ sudo addgroup rick dialup addgroup: The group `dialup' does not exist.
- -
-
-
- Rick Begeman -
- Today at 6:40 AM
- To - - Jim Unroe
-
Message body Thanks Jim
I'm embarrassed I did not find that. I was going at it from the other direction trying to identify which ttyS is assigned to the physical port I am connecting to.
I came up with many answers that gave hardware addresses (bus and device id's) but not which ttyS* that chirp is using to connect.
From: Jim Unroe To: Rick Begeman ; Discussion of CHIRP chirp_users@intrepid.danplanet.com Sent: Thursday, September 28, 2017 2:16 AM Subject: Re: [chirp_users] Connecting to my radio
On Wed, Sep 27, 2017 at 11:39 PM, Rick Begeman via chirp_users chirp_users@intrepid.danplanet.com wrote:
See "serial port permissions" on the "Running CHIRP Under Linux" page.
http://chirp.danplanet.com/projects/chirp/wiki/Running_Under_Linux
Jim KC9HI