29 Sep
2018
29 Sep
'18
2:47 p.m.
On Thu, Sep 27, 2018 at 12:22 PM Nigel A. Gunn G8IFF/W8IFF nigel@ngunn.net wrote:
We keep getting this issue.
The 450D implements a full serial/RS-232 level port. Make sure you cable supports RTS/CTS handshaking. You should have 5 wires on the cable, Pin 2 DATA OUT to computer, Pin 3 DATA IN from computer, Pin 5 GROUND, Pin 7 RTS, Pin 8 CTS.
As far as I know mine if a real PL2303 and CAT control works fine in Fldigi, wsjtx, and qsstv but I can't get Chirp to talk to it. It just times out and says something about expected 6 bytes got 0 or something like that. Nothing additional on console.
Thanks, Richard