Dear fellow Chirp'ers:
I am trying to program in a few channels while leaving some channels blank. I was able to do this with a version of Chirp from 2014 but I recently tried to upload my old .img to a new UV-82 and was met with a firmware incompatibility message. In my new .img I set the channels I want to use (0, 3, and 4) and want the rest of the channels to be completely unavailable (if you are on channel 0 and press the up arrow then you immediately go to 2 having skipped 1). I thought the way to do this was to was to set the frequency to 0.000000 but I get an error message about being out of reference. I also tried to use a CSV file to import and saw just the few channels I need but this didn't result in the radio only having those three channels. I am including a screenshot of my old .img in hopes this can be guiding.
I thank you for your time and assistance.
Sincerely,
B Stone
