On Sun, Feb 11, 2018 at 4:35 PM, Rich Messeder NE1EE@hotmail.com wrote:
Update. http://www.miklor.com/BT5X3/5X3-FAQ.php#NewestRadio Here I found Display shows + and - at the same time In Channel Mode this is normal when the TX/RX frequencies differ. In Frequency Mode + or - is displayed based on Menu 25 (Shift)
So all is OK. But when I switched to VFO from channel mode, I thought that I'd find a way to see what the channel is programmed with (Kenwood has a feature to copy memory to VFO.)
NE1EE
Rich,
To see how a memory channel is programmed you just visit each menu that is stored on a per-channel basis and the current setting will be displayed. There are 9 of them. These guides explain where and when each menu is functional.
http://www.miklor.com/COM/UV_MenuDef.php
Since we have established that menu 25 and menu 26 are not stored on a per channel basis, what you have to do is see what the TX frequency is. To do that set the Memory Display Format for the selected display line (MDF-A or MDF-B) to FREQ. You will be looking at the RX frequency. Then you can tap the [*] key to put the radio into "reverse" mode thus displaying the TX frequency. Tap the [*] key once again to exit "reverse" mode.
Jim KC9HI