The ‘Radio did not Respond’ message can be caused by several possibilities. None are serious.
Solution can be found at http://www.miklor.com/COM/UV_ErrorMess.php

Also, you are running an old version of CHIRP.
It’s very possible your radio is not supported.
Always run the Latest Daily Build.  http://www.miklor.com/COM/UV_CHIRP.php

John

- http://www.miklor.com

From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Charles Albert
Sent: Thursday, August 13, 2015 11:15 PM
To: chirp_users@intrepid.danplanet.com
Subject: [chirp_users] Baofeng UV-5R

Hello, All...

I have the above radio and I'm trying to get CHIRP 0.3.1 on Linux to connect to the radio.

I'm using an USB cable that shows up as ttyUSB0. None of the lights on the radio change (LED should blink, right?) and CHIRP errors that the radio is not responding.

Any ideas where I should start looking?

Take Care & 73

Charles

KC6UFM