If your cable shows to be a Prolific, roll your driver back to 3.2.0.0.
Jardy Dawson WA7JRD Sent from the Death Star for Darth Vader's eyes only. Any other reception will be severely punished. 💀
On Aug 23, 2016, at 17:49, Glenn glennervin@cableone.net wrote:
Well, maybe it was just a problem for my cable, but it stated windows in general. I think it said that windows would find a driver, but it will find the wrong one. It identifies the cable, but it will not work right. Glenn ----- Original Message ----- From: "Patrick Lang" stickpatrick@gmail.com To: "Discussion of CHIRP" chirp_users@intrepid.danplanet.com Sent: Tuesday, August 23, 2016 7:43 PM Subject: Re: [chirp_users] ID-880H
What version of Windows?
8 and 10 automatically found the driver on my valley cable
Sent from a tiny keyboard
On Aug 23, 2016, at 8:14 PM, Glenn glennervin@cableone.net wrote:
Dick, If you are using Windows, you need to install the driver before ever plugging in the cable, or you will have problems. In that instance, if it was plugged into windows without installing the driver first, you may need to remove it from device manager, and install the windows driver, and then plug it in again. I think Linux does not need a driver installed. Glenn ----- Original Message ----- From: "Dick Smith" w4rss@radioclub.org To: chirp_users@intrepid.danplanet.com Sent: Tuesday, August 23, 2016 9:01 AM Subject: [chirp_users] ID-880H
I received the programming cable from Valley Ent. Plugged it in to the pc and to the 880h, but Chirp does not see it. I downloaded the Icom clonging software and it works perfectly.
Any thoughts?
Dick W4RSS
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Glenn at glennervin@cableone.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Patrick Lang at stickpatrick@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Glenn at glennervin@cableone.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72@yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com