Marcus,
I don't speak German either!
Try both drivers. You show one that has a mark on your cable in Device Manager, try this first, then update the Driver.
Usually the problem is that when the Driver is updated, the fake counterfeit chips stop working but they work on the old driver.
See if you can borrow someone else's cable who lives near you. That's often the answer to all problems.
I did exactly that and found my problems were caused by my own errors! How embarrassing because at one time I was actually good at this stuff.
73 Grüße
David N1EA
On Sun, Feb 17, 2019, 13:19 tuvok tuvok@shell-flughafen.de wrote:
hm .. i think this will not run with this driver
Grüße
Markus Mail: tuvok@shell-flughafen.de Web: http://www.discoteam-excalibur.de
Am 17.02.2019 um 16:30 schrieb D.J.J. Ring, Jr.:
Markus,
Show under Device Manager the Driver for this device.
See info here. http://www.miklor.com/COM/UV_Drivers.php
It will tell you everything you need to do to get your cable working.
But first just make sure that you press the cable end with the two pins very firmly into the microphone socket on the Wouxun. Just to make sure!
I'm guessing you have a counterfeit Prolific type chip in your cable.
The page above will show you what to do. If this is the problem, you will have to do this each time you use programming software with Windows because of the counterfeit chip in the cable.
Otherwise buy a genuine WOUXUN cable or this: PC03 FTDI Genuine USB Programming Cable for BTECH, BaoFeng, Kenwood, and AnyTone Radio https://www.amazon.com/PC03-Genuine-Programming-Cable-BaoFeng/dp/B00HUB0ONK/...
73
David N1EA
On Sun, Feb 17, 2019, 08:32 tuvok tuvok@shell-flughafen.de wrote:
i use this cable
https://www.ebay.de/itm/DE-Zweiweg-USB-Programmierkabel-Software-BaoFeng-UV-...
73
Grüße
Markus Mail: tuvok@shell-flughafen.de Web: http://www.discoteam-excalibur.de
Am 17.02.2019 um 14:25 schrieb D.J.J. Ring, Jr.:
Push in the cable to the Wouxun transceiver?
What cable are you using?
73
David N1EA
On Sun, Feb 17, 2019, 07:53 tuvok tuvok@shell-flughafen.de wrote:
Hello, when i will download from the Radio KG-UV2D i get this message..
this is my Cable..
Grüße
Markus Mail: tuvok@shell-flughafen.de Web: http://www.discoteam-excalibur.de
Am 15.02.2019 um 23:00 schrieb tuvok:
Hello, is this Possible, for programming the Wouxun KG-UV2D Radio with chrip? I have a Windows 10 System and have buy a USB Cable but i have no idea why is the UV2D not on the list.. a Friend have say me .. in a Old version he have found this Radio Can anybody help me?
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to D.J.J. Ring, Jr. at n1ea@arrl.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing listchirp_users@intrepid.danplanet.comhttp://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Markus at tuvok@shell-flughafen.de To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
