Can't you just put in a frequency that is not in use? Glenn ----- Original Message ----- From: "Phil - w2lie" w2lie@w2lie.net To: chirp_users@intrepid.danplanet.com Sent: Sunday, October 30, 2016 1:24 PM Subject: [chirp_users] Wouxun Tx Inhibit
I was wondering if anyone had a trick to keep the Wouxun KG-UV8D from transmitting when it is setup to receive outside the Amateur Radio Band.
The Baofeng radios have the ability to set the duplex to "off", but that does not seem to be supported on the Wouxun.
Chirp is smart enough to check the offset when I import the CSV file, so I can't offset + 70.000 either.
Anyone have any tricks up their sleeves for this one, besides setting the split to something low in the amateur band at low power?
Thanks _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Glenn at glennervin@cableone.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com