"It won’t change IF you can hear the other or not"

A loud signal at the microphone of a transmitter set for "wideband FM" (25kHz) should cause RF deviations "out of band" as far as a NFM receiver is concerned. Speaking softly into the mic should be heard just fine up to a point.

Tony
From: chirp_users-bounces@intrepid.danplanet.com <chirp_users-bounces@intrepid.danplanet.com> on behalf of Jardy via chirp_users <chirp_users@intrepid.danplanet.com>
Sent: Sunday, January 5, 2020 1:05:04 PM
To: Discussion of CHIRP <chirp_users@intrepid.danplanet.com>
Subject: Re: [chirp_users] Programming Troubles
 
The only thing that is going to change when you go from FM to NFM is the voices will sound ‘funny’. It won’t change IF you can hear the other or not. As pointed out before, check your tone or DCS settings. 

Jardy Dawson WA7JRD

Message sent from some electronic device that only the Manufacturer of said device really cares about. 


On Jan 5, 2020, at 10:51, Tony Fuller <goldstar611@hotmail.com> wrote:


I believe that a channel spacing of 12.5kHz corresponds to narrow band fm, or NFM in a lot of chirp drivers. See if changing the mode from FM to NFM helps -- hopefully that is an option.

Tony
From: chirp_users-bounces@intrepid.danplanet.com <chirp_users-bounces@intrepid.danplanet.com> on behalf of Jonas Haiduk <jhaiduk@hotmail.com>
Sent: Sunday, January 5, 2020 10:52:35 AM
To: chirp_users@intrepid.danplanet.com <chirp_users@intrepid.danplanet.com>
Subject: [chirp_users] Programming Troubles
 
My friend gave me a spreadsheet of frequencies programmed into his radio, which included the following 
<image.png>

<image.png>


I can hear him through my radio, but I cannot send to him so that he can hear me. Attached is a screenshot of what I attempted in CHIRP. I have a feeling the problem I am experiencing is due to the Channel Spacing column from his spreadsheet, which I'm not sure how to deal with in CHIRP

I have a BAOFENG A-58 and am using CHIRP for Mac. 

Thanks in advance for any help!

Jonas

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Jardy at jardy72@yahoo.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com