Thanks for the info.
I will try it on another computer and see what happens.
I don't know why you can not find me in the FCC data base. I have only been there almost 50 years! I am using the USA version of the HT.
Thanks.
73,
Ken, W8EK
Richard Farina wrote, On 7/3/2011 10:33 PM:
On 07/03/11 21:07, Ken Simpson, W8EK wrote:
What you describe is the way I am doing it.
Yes, I have plugged and unplugged the cable several times. Same result. I am sure it is in all the way.
I am using ver 0.1.11
By the way, I am using Win XP with SP3.
Since I wrote this, I also got an older serial cable (as in 9 pin D connector and not usb) that I had for a VX-5, and tried it. Same result (although it is on Com 1).
If I had to guess, and I do, this may be a windows issue. Perhaps there is a conflicting library or something? It certainly sounds to me like you are doing it right.
The only other thing I can think of, since I can't find you in the fcc database, are your radio models US version or something else? If you have the European models of the radios it may not work (but can pretty easily be modified with your help).
Thoughts? Rick
Thanks.
73,
Ken, W8EK
Dan Smith wrote, On 7/3/2011 8:55 PM:
It says Com 3 OK, and appears that it is trying to download the data from the VX-3. I have the VX-3 in clone mode, and it says it is transmitting data (I pushed "Band" after getting into clone mode, and the display says "Tx"). That sounds like it should work, but it times out after about 30 seconds or so. Nothing happens.
Just so we're clear, the radio is in clone mode, you click "OK" on the computer and see it say "downloading from radio", and then you push the band button, right? That should be the procedure.
Are you sure that the cable is pushed all the way into the jack? Some of them are hard to seat fully.
Which version are you using? 0.1.11 or a daily?
Maybe Rick can offer some suggestions here, as he wrote and has the most experience with the VX3 driver.