that's the device ID for a pl2303. the name of the module is

  pl2303

execute

    lsmod

to see if the module got loaded.

If not,

   sudo modprobe pl2303

to force-load the module

On Wed, Apr 3, 2019 at 10:07 PM Dennis Carr <dennisthetiger@chez-vrolet.net> wrote:

On Wed, 3 Apr 2019 21:51:05 -0700
Dan Clemmensen <danclemmensen@gmail.com> wrote:

> I'm a bit surprised that it's /dev/ttyACM0. on my (non-Debian) Linux,
> that would be assigned to a modem a fake modem such as an
> OTG-connect3d phone or something like that.

Yeah, confirmed, it's /dev/ttyACM0.  Tried 'watch'ing that, but 'watch
ls /dev/tty*' is kinda useless as it overflows.

>   on my computer, USB serial dongles get addresses like /dev/ttyUSB0

I got that as well with the Baofeng clone cable I've got, doesn't seem
to be the case here.

The only other thing making me think about this a bit is the fact that
'lsusb' comes up with this:

Bus 003 Device 025: ID 26aa:001b 

...that's it, no description following the devid.  So my computer sees
something there, it just doesn't know what it is. 

...am I missing something somewhere, a kernel mod maybe?

-Dennis
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Dan Clemmensen at danclemmensen@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com