Here is a list: CTCSS (*Continuous Tone-Coded Squelch System) Codes* CTCSS Hz CTCSS Hz CTCSS Hz 1 67.0 14 107.2 27 167.9 2 71.9 15 110.9 28 173.8 3 74.4 16 114.8 29 179.9 4 77.0 17 118.8 30 186.2 5 79.7 18 123 31 192.8 6 82.5 19 127.3 32 203.5 7 85.4 20 131.8 33 210.7 8 88.5 21 136.5 34 218.1 9 91.5 22 141.3 35 225.7 10 94.8 23 146.2 36 233.6 11 97.4 24 151.4 37 241.8 12 100.0 25 156.7 38 250.3 13 103.5 26 162.2 122* 69.3
*Some radios use 69.4 Hz instead, which better fits the harmonic sequence, and this tone is often omitted as a choice. Info taken from: http://www.hitechwireless.com/ctcss-codes/
I used this one because the table was less complicated. But all you need to do to see the CTCSS standard tones is google CTCSS.
On Fri, Jun 30, 2017 at 10:37 AM, Bill Gabbard wcgabbard1@windstream.net wrote:
*Try 141.3, no such 146.3!!!!!*
----- Original Message ----- *From:* Kyle Colyer colyer.kyle@gmail.com *To:* Discussion of CHIRP chirp_users@intrepid.danplanet.com ; Tom Consodine nd5y@yahoo.com *Sent:* Friday, June 30, 2017 11:19 AM *Subject:* Re: [chirp_users] PL tone 146.3 not available to use
No it is 146.3. The repeater site is managed by a company and they said it is 146.3. It works on 146.3 on my handheld boafeng.
On Fri, Jun 30, 2017 at 6:16 AM Tom Consodine via chirp_users < chirp_users@intrepid.danplanet.com> wrote:
Do you mean 146.2? 146.3 isn't a standard tone.
Tom ND5Y
On 06/29/2017 11:28 PM, Kyle Colyer wrote:
Hello.
I have a baofeng hp 82 and I used the older software to program it and it works great with our repeater. Then I got a btech 50 and downloaded the chirp software to program it but I cannot get it to work right off our repeater. One of the problems is that the pl tone box only has a drop down box and preset pl tones and ours is 146.3. I can't figure out how to put that tone in the chirp program. I have tried to manually input it into the radio itself and it won't work. I had this problem with the bf82 also before I got the software and programmed it with the computer instead of putting it into the radio. Can anyone help?
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to KRC at colyer.kyle@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to BillG226 at wcgabbard1@windstream.net To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Chuck Hast at kp4djt@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com