Oops, meant to reply to the list...
-------- Forwarded Message -------- Subject: Re: [chirp_users] Leixen VV-898S Date: Wed, 18 Sep 2019 20:54:58 -0500 From: Tom Henderson Tom@Henderson4.us To: Nigel A. Gunn G8IFF/W8IFF nigel@ngunn.net
Try downloading it as a Jetstream 270mh. I discovered that the A and B bakc were preserved when I downloaded with that profile rather than the Leixen.
Tom Henderson
On 9/18/19 8:45 PM, Nigel A. Gunn G8IFF/W8IFF wrote:
If you're going to import from another radio, import the .img file and not a .csv file.
On 18 September 2019 at 19:59 Dennis Wage dwage@dwage.com wrote:
Don't import files from a different radio. They might import but might be the wrong format. I am thinking about the sorting thing could be as simple as 01 instead 1 or 001. With radio software like Chirp and especially Chirp, because it works with so many different radios, the formats of everything needs to be EXACT!!
Reset your radio to factory defaults. I always then program one frequency manually so that when I download from the radio to Chirp I can see the format the data is in.
Download the now defaulted radio to a file. Edit this file to upload back to the radio.
Dennis M. Wage (W9BOQ)
245 Corum Hill Road Castalian Springs, TN 37031 (615) 310-4242 Cell (615) 562-5128 Home http://hammondb3organ.net http://hammondb3organ.net/ http://overdubs.net
On Wed, Sep 18, 2019 at 6:40 PM Dave C < cavanadd@gmail.com mailto:cavanadd@gmail.com> wrote:
I just received the above radio and am having a bit of trouble with the way CHIRP (or the radio) is handling the channels after programming. The radio seems to work fine, the programming cable connected right away without any driver drama, and the factory software even loaded up and will upload and download to and from the radio, but it's otherwise mostly useless**. Chirp seems to work fine as well as far as reading and writing to the radio, and I was able to import UV-5R files without any problem. The problem I'm having is the order of the channels is scrambled when uploading or downloading. I THINK it has something to do with the separate A and B memory banks. I made sure I selected the "A" bank on the Settings screen, but it still seems to scramble the channels. Earlier today I manually entered twelve local repeaters and numbered them channels 1 through 12, all in Bank A, but when I downloaded the radio to CHIRP, the #1 channel was now #4. I also deliberately didn't give any of the manually entered channels names, but there were channels with names scattered in with the other unnamed channels, apparently from Bank B. If anyone has any ideas I'd like to hear them. ** The factory software has two separate screens for Bank A and B, and seems to work fine moving files to and from the radio. The problem is I can't see any way to enter repeater offset frequencies or -/+ values; apparently it's necessary to calculate and enter offsets manually. thanks Dave _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dennis Wage at dwage@dwage.com <mailto:dwage@dwage.com> To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com>
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1 937 825 5032 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net www http://www.ngunn.net
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Tom KM4UQB attom@henderson4.us To unsubscribe, send an email tochirp_users-unsubscribe@intrepid.danplanet.com