I hope I don't ruffle too many feathers here, but on a couple of cables (and I have about 50 types of radios I've programmed), I was about to give up, I've bought a cable and software from RT Systems: https://www.rtsystemsinc.com/. If a radio model isn't supported by chirp or it's been too difficult for me to make it work, I've had to go to RT.73 de Shon K6QT_______________________________________________On Tue, Jan 19, 2021 at 2:26 PM Glenn K0LNY <glennervin@cableone.net> wrote:_______________________________________________Sounds like your cable may not be making a connection into the radio.You have to sometimes press really hard against the radio, and some people have to trim some of the rubber block off in order for it to go all the way into the radio.I would start by shaving the corners around the block at a 45° so it seats deeper into the radio area.Glenn----- Original Message -----From: Marc DanzigerSent: Tuesday, January 19, 2021 2:58 PMSubject: [chirp_users] USB cable helpI've tried the various drivers I can find online, but neither Chirp nor the Baofeng app can seem to establish communication...
Is there a robust FAQ somewhere on this or someone who can guide me through??Marc - ham in waiting
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Glenn at glennervin@cableone.net
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Shon, K6QT at sre.1966@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Chance at chance.fulton@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com