Mike, Not sure if this applies or not, but with some of the software, when it is unzipped, one of the files is a language file, ie. Chinese.ini, English.ini, etc.
Delete the Chinese.ini file and only leave the English.ini This forces the program to open with the only .ini file it finds.
Worth a try...
John K3NXU
Http://www.miklor.com
On Dec 28, 2013, at 7:44 PM, Michael Walker va3mw@portcredit.net wrote:
Hi Bill
That is likely the answer, but no joy their either. I have yet to find a button for language changes or anything else that gets me closer.
Thanks all, this was just a shot in the dark.
Mike va3mw
On Sat, Dec 28, 2013 at 6:57 PM, william coulson wcoulson730@gmail.com wrote: You have to switch it to English by selecting English on the radio buttons. Then the question marks will disappear eh?
I hope I understand your issues, if not good luck!
Bill ----- Original Message ----- From: Mike va3mw To: Discussion of CHIRP Cc: Discussion of CHIRP Sent: Saturday, December 28, 2013 3:52 PM Subject: Re: [chirp_users] Baofeng V6
Jack and I are seeing the same thing. We don't have the right software for the right radio.
I know 100% in my case that the computer, ports and cable are functional.
Boafeng own software has language localization issues. The software loads but all the icons are full of question marks. .???
The failure is that the program tries to talk to the radio and the radio does not respond, so it times out.
Sorry for the bandwidth on the chirp reflector, but this was the best collection of these type of users I know.
Sadly there is no BF-v6 listed on their download site.
Mike va3mw
On Dec 28, 2013, at 5:25 PM, Amnon Zohar amnon.zohar@gmail.com wrote:
are you sure widows did. not automaticaly upgrade the driver to the newer not compatible version?
בתאריך 28 בדצמ 2013 21:34, "w4grj" w4grj@satterfield.org כתב: I am using the Baofeng software, error message cannot connect to radio
It is not a cable or port issue.
Jack
W4GRJ
From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of John LaMartina Sent: Saturday, December 28, 2013 2:29 PM To: 'Discussion of CHIRP' Subject: Re: [chirp_users] Baofeng V6
Is the programming of the UV-6 software or a driver/cable issue.
What error messages are you getting?
John K3NXU . . . http://www.miklor.com
From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of w4grj Sent: Saturday, December 28, 2013 2:15 PM To: 'Discussion of CHIRP' Subject: Re: [chirp_users] Baofeng V6
I have a UV-6, also cannot get it to program with the Baofeng software.
Has anyone successfully programmed the UV-6?
Thanks,
Jack
From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Michael Walker Sent: Friday, December 27, 2013 10:14 PM To: Discussion of CHIRP Subject: Re: [chirp_users] Baofeng V6
Yes, it isn't a port issue.
Mike
On Fri, Dec 27, 2013 at 10:11 PM, Amnon Zohar amnon.zohar@gmail.com wrote:
could you comunicate with any other radio?
בתאריך 28 בדצמ 2013 05:07, "Michael Walker" va3mw@portcredit.net כתב:
Hi All
I know that this is a little off topic and this radio isn't supported by Chirp, but has anyone actually been able to program one?
This is a 16 Channel VHF only unit.
I've tried just about all the software from Baofeng that I can find, but I have not found anything that will talk to the radio.
I am 'assuming' it is using a Kenwood cable configuration as well.
Mike va3mw
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users