Since the Kenwood requires echolink mode to key radio w/o VOX it uses RTS pin to key. I set Radio back to non-echolink and was able to read memories. Does CHIRP enable RTS pin in serial port when it reads memories? Would seem so.
Jim WB8EYE
-----Original Message----- From: chirp_users-bounces@intrepid.danplanet.com chirp_users-bounces@intrepid.danplanet.com On Behalf Of Jim Unroe Sent: Monday, September 14, 2020 10:10 AM To: Discussion of CHIRP chirp_users@intrepid.danplanet.com Subject: Re: [chirp_users] Chirp, upon read radio memory keys radio
On Mon, Sep 14, 2020 at 8:45 AM norcrossjcn@gmail.com wrote:
Chirp, upon read data memory, keys radio Instead of having it go to PROG
mode.
Kenwood TM-V71
Windows 10
No other task using comport
Fresh restart of OS
Radio keys with RTS
I must click red x to stop chirp.
Thank you
WB8EYE
Jim
Gaines, MI
Jim,
Is it a programming cable with a Prolific USB-to-Serial chip? If yes, have you downloaded, installed and selected the older, but necessary, Prolific v3.2.0.0 device driver? If you don't know, you can find out by using the Device Manager application.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to James Norcross at norcrossjcn@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com