just because the firmware numbers are the same it actually may be differentOn Sun, Mar 6, 2016 at 10:05 PM, Bob <vk2byf@gmail.com> wrote:2 Baofeng UV-5R one yellow one black.
Tried to clone them by turning on the source (yellow one) while holding
down the "mon" key. The black one is connected and on. Lights come on
but black one stays in factory default.
I can read the yellow one no problems Firmware BFS297
Black one, Firmware BFB297, same cable same chirp same USB port I get,
"Radio refused to send block 0x0000"
I have programmed dozens of these beasties with no problem. I have
programmed Wouxuns, Yaesus, Icoms, no problem but this one's got be beat.
I'm using Linux Mint 17.3 so no driver problems.
Over to the Gurus, Thanks de VK2BYF Bob
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Robert Taylor at vawing@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
--Sent From Droid Razr Maxx HD
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to amnon at amnon.zohar@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com