Mine clips. And then if a channel becomes active besides the FM
channel you are listening to, when the channels then stops being active
the UV5x does a swoosh swoosh swoosh from the rx audio. You can
get rid of that by pressing the FM button twice. Also you can stop the
distortion by going off channel then back using the channel encoder knob
or up/down buttons. This will clean the audio up but it will eventually
return to being distorted. So you just repeat the process.
From: william coulson <wcoulson730@gmail.com>
To: Discussion of CHIRP <chirp_users@intrepid.danplanet.com>
Sent: Saturday, October 5, 2013 6:13 PM
Subject: [chirp_users] FM Broadcast signal cliping or distortion
Hi Jim
Have you heard or have you personal experience
of the Baofeng UV5XX clipping the FM signal or distorting in FM
broadcast mode?
I still say your truly deserve an award for the "online"
service you have and continue to provide to all of us.
Bill Coulson W 6 S Q
----- Original Message -----
Sent: Saturday, October 05, 2013 3:03
PM
Subject: Re: [chirp_users] Strange
Situation
_______________________________________________
chirp_users mailing
list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users