See if this helps: https://www.qrvtronics.com/CatHAM_Radio/files/UsingCHIRPorOtherSoftware.pdf Larry, N7RGW
On Wed, Jun 5, 2019 at 7:22 PM Jim Unroe rock.unroe@gmail.com wrote:
On Wed, Jun 5, 2019 at 8:59 PM Glenn At Home glennervin@cableone.net wrote:
Which operating system are you using, and which com port/USB port did
you select?
From: gearjam@ken-tennwireless.com Sent: Wednesday, June 05, 2019 7:52 PM To: chirp_users@intrepid.danplanet.com Subject: [chirp_users] Second Attempt cant program my radio
I bought $20.00 program cable from Amazon. Had to download driver CDM v2.12.28 WHQL Certified. Downloaded CHIRP UV82S35. When I click on "Read data from radio" a small window opens that says "Read data from radio" with three tabs, "Read", "Cancel" and "Help". When I click on Read I get another small window that says "Operation Prompt" with the message "! Fail connect with transceiver". When I click on Help nothing happens. Cable is firmly plugged into radio to the second click. Tried dampening the pins for a better connection as per the Baofeng instructions. I've also tried the radio on both channel mode and frequency mode. Checked Miklor.com to no avail. I accidently keyed the PPT button and heard a buzz from my computer speakers so I believe I have a connection with the cable. Any advice??????? Steve Prime
Hi Steve,
You still don't have a working connection between the radio and computer. Follow the instructions on miklor.com to determine which device driver is install and which COM port number has been assigned to the programming cable and report back.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Larry Lovell at larry.lovell76@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com