Thanks for this. I've been using this programming process without incident on other hand-held's. I just can't figure out why the WS32 isn't recognized or accessible from the chirp program. I'll check out the miklor site. Any other suggestions?
-----Original Message----- From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Nigel A. Gunn G8IFF/W8IFF Sent: Friday, September 18, 2020 9:39 AM To: Discussion of CHIRP Subject: Re: [chirp_users] Help wanted connecting to/programming the Icom ws32 handy talkie
The programming info is the same for every radio. Connect radio, download from radio, edit, upload to radio, saving as you go. miklor.com has some useful getting started information.
On 18/09/2020 09:22 KB3DNZ kb3dnz@p1s.com wrote:
Greetings fellow chirp users, Will someone please point me to chirp info on programming the Icom ws32. I'm having absolutely no luck in getting the program to recognize the radio. I'm guessing I'm not doing something right. I poked around the chirp website but came up empty. Any help is greatly appreciated. Thanks much, Sam/kb3dnz
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net www http://www.ngunn.net _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Sam Garula at kb3dnz@p1s.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com