Hi Phillip If you’re not seeing your cable in chirp you don’t have the correct driver for your cable installed. If you know the chip set in the cable search out the driver for it . I use chirp on my old iMac running lion OS and that’s old by today’s standard. Of course you are probably aware of the problem with prolific fake chips sets and to some Degree ftdi but as you said you have good quality cable. Try checking in the system profiler to see if the cable shows up there to get some info of its manufacturer.
Randy VE3JPU@me.com
On Nov 13, 2018, at 10:09 AM, Phillip C via chirp_users chirp_users@intrepid.danplanet.com wrote:
Hey Dennis, not stupid at all. (I’ve done IT support so I’ve heard them all…)
I’m using the same premium cable I used with my previous Mac & Baofeng.
Best regards,
Phillip
On Nov 13, 2018, at 10:02 AM, Dennis Wage dwage@dwage.com wrote:
OK this sounds stupid but do you have a cable plugged into the usb port?
Dennis M. Wage (W9BOQ)
245 Corum Hill Road Castalian Springs, TN 37031 (615) 310-4242 Cell (615) 562-5128 Home http://hammondb3organ.net http://overdubs.net
On Mon, Nov 12, 2018 at 3:45 PM Phillip C via chirp_users chirp_users@intrepid.danplanet.com wrote: Thanks Chris,
The USB is enabled & functioning fine. Still looking for a solution
Best regards,
Phillip
On Nov 9, 2018, at 6:36 PM, Christopher F. Beesley chrisbees2@hotmail.com wrote:
Hi Phillip, Chris here. I don't know anything about Apples so I might be wrong... If you've only got Bluetooth in a Connect menu then doesn't that mean that no hardware (wired) ports are currently available for data Tx/Rx? Assuming that a USB connector is available for data Tx/Rx (and not just for charging) then it might need enabling via a setting before it will appear on the Connect menu. Alternatively, the Connect menu might be specific to Bluetooth only. Perhaps there is another menu for USB functions. 73, Chris
From: chirp_users-bounces@intrepid.danplanet.com chirp_users-bounces@intrepid.danplanet.com on behalf of chirp_users-request@intrepid.danplanet.com chirp_users-request@intrepid.danplanet.com Sent: 08 November 2018 20:00 To: chirp_users@intrepid.danplanet.com Subject: chirp_users Digest, Vol 119, Issue 4
Send chirp_users mailing list submissions to chirp_users@intrepid.danplanet.com
To subscribe or unsubscribe via the World Wide Web, visit http://intrepid.danplanet.com/mailman/listinfo/chirp_users or, via email, send a message with subject or body 'help' to chirp_users-request@intrepid.danplanet.com
You can reach the person managing the list at chirp_users-owner@intrepid.danplanet.com
When replying, please edit your Subject line so it is more specific than "Re: Contents of chirp_users digest..."
Today's Topics:
- New MacBook Pro Issue (Phillip C)
Message: 1 Date: Thu, 08 Nov 2018 14:13:56 -0500 From: Phillip C phillipc@mac.com Subject: [chirp_users] New MacBook Pro Issue To: chirp_users@intrepid.danplanet.com Message-ID: 0916598C-B3C0-41F9-B377-767F45BDB1D6@mac.com Content-Type: text/plain; charset=utf-8
I have used CHIRP in the past with an older MacBook with no issues. Now I have the MacBook Pro 2018 with USB-C. -I have the Apple supplied FTDI drive & no others. -Only bluetooth shows up in the connect menu -I also am using a new Baofeng. I used to have the UV-5R but now I?m using a BF-F9HP which I understand is supposed to be a UV-5R variant. Do I select UV-5R or BF-F8 in the menu?
Can anyone provide a starting point?
Best regards,
Phillip
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
End of chirp_users Digest, Vol 119, Issue 4
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Phillip at phillipc@mac.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dennis Wage at dwage@dwage.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Skid at ve3jpu@me.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com