also see my site
http://flightsimhq.org/radio/CHIRP_under_linux.html
/dev/ttyUSB0 usergroup dialup
On Mon, Dec 8, 2014 at 6:47 PM, David Ranch chirp@trinnet.net wrote:
Try out Andy's HamRadio ISO:
http://sourceforge.net/projects/kb1oiq-andysham/It has Chirp pre-installed but you'll probably want to upgrade it before you run it. After that, just follow the Chirp documentation. Since you're using a UV-5R, see:
http://www.miklor.com/COM/UV_CHIRP.php--David
On 12/08/2014 02:06 AM, y_61@libero.it wrote:
Hi, sorry i have a baofeng UV-5R release BFS 297… ( july 2014 i buy )
I whant yo create a CHIRP on usb pen boot , I think is work on ubuntu
or
linux ?
PLEASE In how mode I create it ?
I have the programm unebootin for create with the ISO the boot chirp on
the
Usb pen.
But, where I downoad the CORRECT ISO immage for my baofenf UV-5R BFS 297 version ?
I use a comunication cable buy on amazon ( I think is a clone ) in this
case
with NO use windows but linux…no driver is request ?
VERY IMPORTANT , after the boot whith this chirp on usb pen drive in
linux,
what I to do to install the driver or start the comunication for the
cable to
my pc ???
Or I insert the cable in a usb port and is finish ? I oper the chirp
program
and select in “radio” and read the data memory ?
Thanks for help, best 73
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users