On Thu, 4 Apr 2019 08:41:09 -0700 Dan Clemmensen danclemmensen@gmail.com wrote:
I think the micro-USB "data" port on the DFT-70 is really an OTG port, not an embedded pl2303 chip.
OK, I think I've got it.
The g_* modules only had g_serial, but the cdc_* were all available. After removing the *2303 module and modprobing the cdc_* set, I tried again. Downloading was fine, but after powercycling I could not upload - the radio failed to ACK block 1.
After futzing with it, accidentally hard resetting the radio, and getting started again (and in fact fearing bricking the thing), I did a raw upload, loaded my new dataset that I ported over from my Baofeng, and uploaded this successfully.
This requires some testing, but we may be able to get away with *not* having to dress up as a harem girl and dance the watusi while facing north and plugging in the radio all at the same time. =D
Dan, thanks for the help and 73.
-Dennis KE7KIF