On 03/25/2018 01:53 PM, Jeff wrote:
In CHIRP, Tone is what you would set for transmitting to a repeater. ToneSql only affects receive, and isn't generally used.
This is not correct see: https://chirp.danplanet.com/projects/chirp/wiki/MemoryEditorColumns
I use ToneSql all the time, as do many others. In a busy metro area, it is almost a must.
But regardless of what values those might be set to, it's the Tone Mode setting that determines what happens when you're transmitting or receiving. If it's set to Tone or None, you'll hear everything on the frequency. Otherwise you'll be using that monitor button.
CTCSS stands for Continuous Tone Coded Squelch System, which is what you're using whenever there are tones involved during transmit or receive. Anything else is just a shorter version of the same, mainly because ten syllables is a hassle.
On March 25, 2018 1:14:48 PM UTC, Dennis Wage dwage@dwage.com wrote:
I have no where else to ask this question. Is TSQL the same as CTCSS? The reason I am so intrigued is about this is The other day my UV-5R was in scan mode and a repeater in Huntsville continually stopped my scan with a carrier or tone, not sure which yet. But I heard no audio. No matter where I set the squelch, even to 0 I got no audio. However, if I hit the Moni button I could hear the guys talking. What was happening here? Thanks in advance. In 3 weeks I'll be W9BOQ if the FCC grants my vanity call sign. Whiskey Niner Bravo Oscar Quebec. Dennis M. Wage 245 Corum Hill Road Castalian Springs, TN 37031 (615) 310-4242 Cell (615) 562-5128 Home http://hammondb3organ.net <http://hammondb3organ.net/> http://overdubs.net
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Paul AC0HY at ac0hy@wpmills.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com