John, Are you using CHIRP or Commander? For CHIRP, there is a box in the upper left hand corner showing a range of memory channels to show. If it shows 1-35, that is all you would see. Change it to show all channels and it should work.
Jardy Dawson WA7JRD Nobody really cares what device you are using, as long as YOU like it!
On Jun 12, 2015, at 15:37, John Barker john@jabarker.net wrote:
When I try to print from my FT-60 Commander it says “memory range 1 to 35” and I say OK but only get one page to print. Any ideas thanks John
From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of John LaMartina Sent: Friday, April 17, 2015 8:27 AM To: 'Discussion of CHIRP' Subject: Re: [chirp_users] Yaesu FT-60
An Error Message about Communication is a little vague. Please let us know Exactly what error message are you getting?
Check the Error Message against those found at: http://www.miklor.com/COM/UV_ErrorMess.php
From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Jerry A Sent: Friday, April 17, 2015 6:36 AM To: chirp_users@intrepid.danplanet.com Subject: [chirp_users] Yaesu FT-60
Hello, Would anyone be able to offer help with the Yaesu FT-60 and Chirp? For some reason I am getting an error message about communication between the radio and software. I have used FT-60 Commander, a Prolific USB to com port interface and Windows XP successfully but am unable to make things work with Chirp and Windows 7 using the same procedure, interface and com port. 73, Jerry – VE9CD
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com