Why did you download the image of the second radio????? I have two Boafeng radios. I programmed the first one they way I wanted both to be. Saved the file. Then I just uploaded that file to the second radio and it works perfectly. 

Tom


On Sep 12, 2015, at 5:40 PM, dwilson <dwilson223@cox.net> wrote:

You know, I think on the first radio I might have changed the service settings before I actually saved the first file...

-----Original Message-----
From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Jim Unroe
Sent: Saturday, September 12, 2015 5:13 PM
To: Discussion of CHIRP <chirp_users@intrepid.danplanet.com>
Subject: Re: [chirp_users] An error has occurred. Image not supported by radio:

On Sat, Sep 12, 2015 at 7:56 PM, dwilson <dwilson223@cox.net> wrote:
I have three radios. I used chirp to download an image of the first 
radio, made a few changes just to practice the process (added some 
NOAA frequencies), saved that file and uploaded it to radio 1. Changes 
uploaded fine.



I thot’ I could use that same fine to upload to the other radios so 
they would all be set up the same?



I downloaded the image of the second radio and saved it, then tried to 
upload the changed file from the first radio to the second but got 
this
error:

An error has occurred. Image not supported by radio: 'XXXXXXX' where 
each X is actually a rectangular box with an upper case X inside.



I saw where someone else had this error and it was noted that the 
firmware was not the same for the two radios so I checked it and the 
firmware displayed in the Firmware Message 1 for both downloads is 
identical: N5R340A



So I’m not sure where to go from here. I guess I can recreate all the 
changes in the download from the second radio (?) but kind of wanted 
to know what I am doing wrong so the upload of the image from the 
first radio is not being supported by the second?



Thanks for your help!

debra


All 14 characters of the firmware version must exactly match.

Download from all 3 radios and email them to me. I will take a look to see what is going on.

Jim KC9HI
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2015.0.6086 / Virus Database: 4419/10627 - Release Date: 09/12/15

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com