Dale,
FWIW, and hopefully you didn't buy the expensive Kenwood cable yet,
I use this cheap cable with Chirp and my TM-V71A:
http://www.pccables.com/cgi-bin/orders6.cgi?action=Showitem&id=ID940742&partno=70810&search=DIN8&rsite=&rcode=
Also, as for that modem-manager process, it could be something udev
spawns. I recently switched from Ubuntu to Debian on all of my
machines, otherwise I'd try to do a little more digging for you.
Mat WD4DDY
On 02/10/2012 01:53 PM, Dale Mosby wrote:
Well thank you for the assistance in debugging. The
V71A, remote install kit,
and programming cable were all purchased at the same time from Ham
Radio
Outlet (HRO) in the Portland, Oregon area.
I made the incorrect assumption that this bundle of parts were all
going to
work together. It now seems that HRO sold me the incorrect cable.
They confirmed
this in my phone call with them just now.
Sorry about starting out by blaming the software rather than the
hardware. :-)
I will give another try with the correct cable and I suspect see
better results.
Thanks & 73, Dale, K7FW
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users