Bob,
The CHIRP driver is idrp.py and for some reason it does not show up as a choice in CHIRP (I believe it should be "ID-2000V/4000V/2D/2V"). Most of the activity of this driver appears to be from 2009 to 2012. I installed a daily build from May of 2012 and March of 2012 and there was still not a selection for this Icom model.
Jim KC9HI
On Sat, Nov 8, 2014 at 11:35 PM, Robert Keeton rkeeton@blarg.net wrote:
I have an ICOM , ID-RP4000V Dstar repeater. According to the Wiki page both the VHF and UHF repeater is supported. When I check the daily build list it is not shown as supported and I could not locate a *.py file for the repeater. I have been through the archives and found reference that support for the ID-RP400V was added and it was working , but not much other info. When I run Chirp to try detect the repeater/radio I get an error message “ An error has occurred Unable to get radio model”. I have tried both the most up to date windows version and a USB thumb drive with the Live CD loaded. Both versions operate fine , but with the error message. Any suggestions????
Bob K7MHJ
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users