Tony, you're not helping!

Until the older driver is installed properly, it won't recognize the cable.

Unless every step is followed EXACTLY, the older driver won't be installed.

Take it from someone who was convinced that I had followed every direction, several times.

When you finally do it right, it will work.

Mike Earls

AF5MS

TSRA Life Member

NRA Benefactor Member

From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Tony
Sent: Saturday, January 24, 2015 6:39 PM
To: 'Discussion of CHIRP'
Subject: Re: [chirp_users] Baofeng cable

He’s not even at the point where drivers are needed.

He can’t even get Windows to recognize the cable.

Repeating “Read the instructions”  over and over without offering any actual advice is a waste of everybody’s time.

C’mon…

-Tony

From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Jim Unroe
Sent: Saturday, January 24, 2015 7:36 PM
To: Discussion of CHIRP
Subject: Re: [chirp_users] Baofeng cable

Follow the instructions in the guide step by step to select it. If you don't select it as shown in the guide, Windows will continue to use the latest driver and the programming cable will continue to fail to function properly.

Jim