I forgot that you are on Windows. The windows OS is very poor supporting USB. You might try going into the device manager and tell it to show hidden devices. Once that is done, look at the USB entries and delete all of them that are diminished icons. That is, they are lighter than the other icons.
Good luck.
Alan
From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Charles Gierke
Sent: Sunday, August 23, 2020 3:05 PM
To: Discussion of CHIRP; John LaMartina
Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating
hi, still no luck.
I went to the web site and put a death-grip on the plug and held it in as far as it would go. I trimmed a hair of the edges of the plug to let it seat on the bottom.
thanks for the suggestions
On August 22, 2020 at 5:55 PM John LaMartina <JohnLa@usa.net> wrote:
Www.Miklor.com/COM/UV_ErrorMess.php
On Aug 22, 2020, at 6:45 PM, Charles Gierke <cgierke@cox.net> wrote:
On Wednesday my 2 BaoFeng UV 5R radios could download and upload to CHIRP.
On Friday all I got was the following message: Radio Did Not Respond.
I tried reloading the latest version of CHIRP, no change. I tried an earlier version of CHIRP, no change. I reloaded the latest version back, no change. Visually the radio's red light blinks then the LED display blinks then the error message shows up on CHIRP.
Any suggestions?
Thanks Chuck KJ7INT
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to John LaMartina at johnla@usa.net
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Chuck at cgierke@cox.net
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com