- Users - lists.chirpmyradio.com

Installation Fail
by jloflin＠elp.rr.com 28 Jul '24

28 Jul '24

Attempting to install chirp-20240706-py3-none-any.whl on Linux Mint 21.3, I get the following pip_errors.log: ========================================================================================== PIP STDOUT ---------- Processing ./chirp-20240706-py3-none-any.whl Collecting pyserial (from chirp==20240706) Downloading pyserial-3.5-py2.py3-none-any.whl.metadata (1.6 kB) Requirement already satisfied: requests in /usr/lib/python3/dist-packages (from chirp==20240706) (2.25.1) Collecting yattag (from chirp==20240706) Using cached yattag-1.15.2.tar.gz (28 kB) Preparing metadata (setup.py): started Preparing metadata (setup.py): finished with status 'error' PIP STDERR ---------- error: subprocess-exited-with-error × python setup.py egg_info did not run successfully. │ exit code: 1 ╰─> [28 lines of output] Traceback (most recent call last): File "<string>", line 2, in <module> File "<pip-setuptools-caller>", line 34, in <module> File "/tmp/pip-install-bvy7o125/yattag_4e615897f998430bbe99e6748ecc4b2f/setup.py", line 6, in <module> setup( File "/home/randy/.local/pipx/shared/lib/python3.10/site-packages/setuptools/_distutils/core.py", line 184, in setup return run_commands(dist) File "/home/randy/.local/pipx/shared/lib/python3.10/site-packages/setuptools/_distutils/core.py", line 200, in run_commands dist.run_commands() File "/home/randy/.local/pipx/shared/lib/python3.10/site-packages/setuptools/_distutils/dist.py", line 970, in run_commands self.run_command(cmd) File "/home/randy/.local/pipx/shared/lib/python3.10/site-packages/setuptools/dist.py", line 956, in run_command super().run_command(command) File "/home/randy/.local/pipx/shared/lib/python3.10/site-packages/setuptools/_distutils/dist.py", line 989, in run_command cmd_obj.run() File "/home/randy/.local/pipx/shared/lib/python3.10/site-packages/setuptools/command/egg_info.py", line 310, in run self.find_sources() File "/home/randy/.local/pipx/shared/lib/python3.10/site-packages/setuptools/command/egg_info.py", line 318, in find_sources mm.run() File "/home/randy/.local/pipx/shared/lib/python3.10/site-packages/setuptools/command/egg_info.py", line 544, in run self.prune_file_list() File "/home/randy/.local/pipx/shared/lib/python3.10/site-packages/setuptools/command/egg_info.py", line 610, in prune_file_list base_dir = self.distribution.get_fullname() File "/home/randy/.local/pipx/shared/lib/python3.10/site-packages/setuptools/_core_metadata.py", line 266, in get_fullname return _distribution_fullname(self.get_name(), self.get_version()) File "/home/randy/.local/pipx/shared/lib/python3.10/site-packages/setuptools/_core_metadata.py", line 284, in _distribution_fullname canonicalize_version(version, strip_trailing_zero=False), TypeError: canonicalize_version() got an unexpected keyword argument 'strip_trailing_zero' [end of output] note: This error originates from a subprocess, and is likely not a problem with pip. error: metadata-generation-failed × Encountered error while generating package metadata. ╰─> See above for output. note: This is an issue with the package mentioned above, not pip. hint: See above for details. =================================================================================== I am unable to figure out how to fix this. Any help would be appreciated. Thanks.

1 1

Baofeng m-5R
by Pete Laughlin 17 Jul '24

17 Jul '24

Is this radio compatible with chirp? I can not find it on the programming list of radios. Also is the Retevis RT3S COMPATABLE with chirp?

3 3

Python version?
by dropkick23＠gmail.com 11 Jul '24

11 Jul '24

Is Python 3.10.8 still the recommend version? Its on the "Python 3 Developer Environment Setup" page Fred

1 0

Bulk Radio Configuration
by Stiv Ostenberg 10 Jul '24

10 Jul '24

Howdy folks! I was wondering if anybody had worked out a way to script the creation of files for various radios based on a single master Excel CVS File. I realize this may be a complex problem given different radio capabilities, but I am hoping somebody might have a solution. I am trying to make Ham Radio easier for new users, and to keep EmComm operators up to date. I would like to edit few "Master" channel lineups, then have config files automatically generated for a pile of radios. I need to update the maps whenever changes are made to the County Emergency Communications Map, and to provide the updates to support a pile of radios. I also plan to make those files available for download for local Hams, and to offer Radio Programming for new hams at local events.

3 3

New chirp-next build
by donotreply＠chirpmyradio.com 06 Jul '24

06 Jul '24

Greetings, A new build of CHIRP-next is available. This includes changes made directly to the tree since yesterday and may include additional features, bug fixes, etc. Unless you have a reason not to, we recommend using the latest build of CHIRP-next at all times. You can get it from here: https://archive.chirpmyradio.com/chirp_next/next-20240706 A list of changes since the last build are here: f28814ff Add AppStream metadata 0fdd2119 Add Bulgarian translation 9df904aa Fix URL in README.md f3bbb462 Fix linux bugreport menu item failure 48083fee Update Italian Translation Issues addressed in this build: [Bug 11400] CHIRP version next 2024-0626 fails to load on linux --

1 0

Wouxun KG-699E
by howard＠small.au 27 Jun '24

27 Jun '24

Has anyone found a radio setting that will work with the Wouxun KG-699E? I know it is not in the supported list but hope it may be compatible with another Wouxun/Other radio. Thanks, Howard, VK4BS

1 0

New chirp-next build
by donotreply＠chirpmyradio.com 26 Jun '24

26 Jun '24

Greetings, A new build of CHIRP-next is available. This includes changes made directly to the tree since yesterday and may include additional features, bug fixes, etc. Unless you have a reason not to, we recommend using the latest build of CHIRP-next at all times. You can get it from here: https://archive.chirpmyradio.com/chirp_next/next-20240626 A list of changes since the last build are here: 2645364d Updated Spanish Translation de5e0c4d Add ability to report new bugs from within CHIRP 63c5c2eb ga510: Add support for "v2" variant c6cf1a75 uv17: Refactor to handle ga510v2 a288abd9 uv17: Refactor memory into definitions and layout 3a58bd2f Add some extra logging in bfc._rawrecv() b231fa0b uv5r.py: fix Baofeng UV-6 support - fixes #11199 8fa7dc6e Update Italian Translation 339e6d43 add UK-K5(99) as alias to UV-K5 Issues addressed in this build: [Bug 10600] radioddity ga-510 not cloning [Bug 11199] Unable to upload back to radio --

1 0

UV-25X2 Ver 1
by billbrownlow4＠gmail.com 22 Jun '24

22 Jun '24

Chirp ver 20240618 reports wrong data received from my UV-25X2 Ver 1. I've had this radio since 2021 but haven't needed to inspect or change the programming sine sometime in 2022.

2 1

Re: Users Digest, Vol 186, Issue 11
by larry louree 21 Jun '24

21 Jun '24

I've got four brand X UHF radios, and five or six Baofeng radios in my collection. Because I use CHIRP, I can easily make sure that all of my radios are configured the same way, which makes it much easier when you hand one to a family member and tell them "go to Channel 15". I don't have to share a bunch of info to them, CHIRP has done all of the hard work. I think these are 3 or 4 different programs to set these radios up, but I can cut and paste the channel set ups between each of the radios and they are all set to the same basic set up. I couldn't do that without CHIRP. Once you get the connection through the driver set up (I'm on a Microsoft program), it works really well. Sometimes I have to try and connect to them once or twice, but I've had very limited issues. I'm a confirmed CHIRP user. Thanks to all that do the hard work to keep it working so well. Larry WRWH885 Larry Louree, PMP Problem Solver Palmetto, Florida 34221 cell: 407-697-1869 On Thu, Jun 20, 2024 at 12:53 PM <users-request(a)lists.chirpmyradio.com> wrote: > Send Users mailing list submissions to > users(a)lists.chirpmyradio.com > > To subscribe or unsubscribe via email, send a message with subject or > body 'help' to > users-request(a)lists.chirpmyradio.com > > You can reach the person managing the list at > users-owner(a)lists.chirpmyradio.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Users digest..." > > Today's Topics: > > 1. Re: Two hosed Baofengs (Jeffrey Vian) > 2. Re: Two hosed Baofengs (Pedja YT9TP) > 3. Re: Two hosed Baofengs (Ken Hansen) > 4. Re: Two hosed Baofengs (Christopher Knowles) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Wed, 19 Jun 2024 12:21:33 -0500 > From: Jeffrey Vian <sandhillsinvestment(a)gmail.com> > Subject: [users] Re: Two hosed Baofengs > To: CHIRP users list <users(a)lists.chirpmyradio.com> > Message-ID: > < > CA+hWPZdeCQqqHa1TF_9LVeVTXfx4+KYsOTvGHinj4z-UbywDbQ(a)mail.gmail.com> > Content-Type: text/plain; charset="UTF-8" > > Chirp allows programming RX freq, TX freq, shift (+-), and tone for > repeaters then when uploaded it saves all the required data. This is done > in a spreadsheet format so it is easily done by channel (and also allows > adding a text name for display if you choose). Different radios require a > slightly different format of the data entered. > > Baofeng does not use ARS so both frequencies must be entered in the proper > sequence when doing so manually. Most other brands use ARS so the shift > (+-) may not even be required. > > Doing manual programming of a Baofeng is a multi step process for each > channel programmed, so quickly becomes an odious task when programming more > than one channel. Chirp removes the many repeated keyboard strokes and > allows entering the data and reviewing it on screen then a single upload > programs all the memory channels at once. > > To me, chirp is a lifesaver on all my radios that it supports. > > To Steve, N1XNX > I think that chirp now has at least a beta driver for the FTM-6000 radio. > I had submitted a request when I got mine just after they were released and > recently got notice that the beta driver was available. I also have the > RTSystems programming software for it. > > Jeff > KI7GJG > > > > On Wed, Jun 19, 2024 at 9:35 AM Gary via Users < > users(a)lists.chirpmyradio.com> > wrote: > > > After much deliberation, I have to ask an honest question: what is the > > purpose of Chirp? To be fair, all I have been using it for is my 2 > > Baofengs. I have a Wouxun KG-Q10H, but use its own programming software > so > > far because Chirp hasn’t picked it up yet. But if hooking up my ‘Fengs to > > Chirp does nothing more than populate a channel list with freqs, or > change > > the messages, maybe you can explain what Chirp really does, what it’s > > useful for. What are memories for if they can’t be programmed with Chirp? > > Why are the other settings there? > > > > It seems to me that, at least with Baofengs, Chirp is only useful for > > loading the radio with a list of downloaded repeaters…after that, each > > channel has to be manually “tuned” in VFO mode in order to process the > tone > > and split, at least. The memory list is just there for look-up. Am I > > missing something here? > > > > And the radios themselves seem to forget, or change even the manual > > settings. I have no idea on how to make individual frequency settings > stay > > after programming them. In Memory mode, in VFO mode, nothing stays as it > > was set. > > > > I guess it’s time to throw these junkers in the trash and actually spend > > some $$ on a real radio. > > > > 73, > > -= N4YVN =- > > > > > > > > > > -----Original Message----- > > From: Jim Unroe via Users <users(a)lists.chirpmyradio.com> > > Sent: June 11, 2024 19:45 > > To: CHIRP users list <users(a)lists.chirpmyradio.com> > > Cc: Jim Unroe <rock.unroe(a)gmail.com> > > Subject: [users] Re: Two hosed Baofengs > > > > > > > On Jun 11, 2024, at 12:42 PM, Gary <gary.barth(a)gmail.com> wrote: > > > > > > > > > > I have two ‘Fengs, a GT-5R and a BF-F9 V2+. I have programmed both > > > > successfully several times, and decided to add another local > > > > repeater to both lists. I have included a screen shot of the last > > > > attempt on the BF-F9. > > > > I had just updated your software, and added the W3EPE repeater to > > > > the list (which correctly shows every entry), saved and uploaded it > to > > > > the radio. > > > > > > > > > > After disconnecting from Chirp, I attempted to access the repeater > > > > (which is very close), and it failed. So I went into the radio menu, > > > > and went to item #25 Offset. It was set to 000.000. Supposed to be > > > > -5.0Mhz. So I manually set in on the keypad and exited. Tried the > > > > repeater again - no joy. Checked the offset - 000.000. Decided to > > > > try the offset itself - 444.375. No repeater, offset reset to 0. > > > > > > > > > > Checked several other freqs on the list - list says there is one, > > > > > radio > > > > shows 0. Uh-oh! Grabbed my GT-5R, and downloaded it to Chirp. Then > > > > disconnected and tried several repeaters. All worked. Used the radio > > > > menu, and the offsets were there. So I added the new repeater to > > > > that list and uploaded the list to the radio. Now none of the > > > > repeaters work, and manually checking the radio, all offsets have > > > > been reset to 0. They’re correct on the Chirp list, but the radio > > > > (neither radio) doesn’t receive the offset data, for some reason. > > > > AND - I can no longer manually set the offset from the radio > > > > keyboard. As soon as I exit the menu the offset returns to 0. Both > > > > radios are now like this. I reset the BF-F9 twice and tried > > > > reprogramming it, with no success. > > > > > > > > > > Any idea what’s happening here? Chirp was working until the last > > > > > update, > > > > and now I can’t even manually set these offsets… > > > > > > > > > > TIA,<IMG_0067.jpg> > > > > > > > > > > -= Gary =- > > > > CHIRP is working fine. You just don't yet understand how these radios > work. > > > > These radios do not use or store 'offsets' for programmed channels. > > Repeaters use 2 frequencies. In input frequency that it listens to and an > > output frequency that it transmits on. In your example... > > > > Repeater input frequency: 449.375 > > Repeater output frequency: 444.375 > > > > Then for anyone to access the repeater, their radio has to use the same > > frequencies in the opposite role... > > > > User input frequency: 444.375 > > User output frequency: 449.375 > > > > That's it. No offset or shift direction required. > > > > So when a memory channel is programmed in your radio via the keypad or by > > using programming software from Baofeng or CHIRP, the radio is sent the > RX > > frequency and the TX frequency. > > > > Because using the 444.375+ shorthand is a convenient way for hams to > convey > > the frequency pair used by the repeater, CHIRP allows the user to enter > it > > using this notation. But then in the background CHIRP that the 3 pieces > of > > info (RX frequency, shift direction and offset) to calculate the actual > TX > > frequency and stores that in the 'image' file because that is what the > > radio > > uses to operate in MR (channel) mode. > > > > It is for this reason that menu 25 (SFT-D) and menu 26 (OFFSET) have no > > purpose and do not function in MR mode. This is also why whenever the TX > > frequency and RX frequency of a programmed channel are not the same (as > > would be the case for a repeater, odd-split, cross-band or TX disabled > > channel), the upper status display area shows a "+-" symbol. > > > > If you set the MDF (Memory Display Format) of the currently selected > > display > > line to FREQ, you will see the RX frequency in the display. > > Then if you tap the [*] key to put the radio into "reverse" mode (or > press > > the PTT button to transmit), you will see the display change to the TX > > frequency. Tapping the [*] key a second time (or releasing the PTT > button) > > will return the display back to the RX frequency. > > > > It is only in VFO (frequency) mode that the SFT-D and OFFSET menus have a > > purpose and function. It is only in this mode that the individual "+" and > > "-" symbols will be seen. > > > > To find out what menus do not function in MR mode, consult my detailed > menu > > reference for the BF-F8HP. > > https://www.miklor.com/COM/UV_MenuDef.php > > > > Jim KC9HI > > _______________________________________________ > > Users mailing list > > users(a)lists.chirpmyradio.com > > > https://lists.chirpmyradio.com/postorius/lists/users.lists.chirpmyradio.com > > To unsubscribe, send an email to users-leave(a)lists.chirpmyradio.com > > To report this email as off-topic, please email > > users-owner(a)lists.chirpmyradio.com > > List archives: > > > > > https://lists.chirpmyradio.com/hyperkitty/list/users@lists.chirpmyradio.com/ > > _______________________________________________ > > Users mailing list > > users(a)lists.chirpmyradio.com > > > https://lists.chirpmyradio.com/postorius/lists/users.lists.chirpmyradio.com > > To unsubscribe, send an email to users-leave(a)lists.chirpmyradio.com > > To report this email as off-topic, please email > > users-owner(a)lists.chirpmyradio.com > > List archives: > > > https://lists.chirpmyradio.com/hyperkitty/list/users@lists.chirpmyradio.com/ > > ------------------------------ > > Message: 2 > Date: Thu, 20 Jun 2024 11:46:34 +0200 > From: Pedja YT9TP <yt9tp(a)uzice.net> > Subject: [users] Re: Two hosed Baofengs > To: Gary via Users <users(a)lists.chirpmyradio.com> > Message-ID: <79d66bd9-5471-4733-b7ed-b0020b947296(a)uzice.net> > Content-Type: text/plain; charset=UTF-8; format=flowed > > > On 19.6.2024. 16:16, Gary via Users wrote: > > After much deliberation, I have to ask an honest question: what is the > > purpose of Chirp? > It is much easier to initially program radio using Chirp. All you have > to do is to find list of frequencies you need and with some copy and > paste prepare them for the radio. > > It also helps if you want to add new programed frequencies or even > rearrange existing or reconfigure radio. > > And you may have more radios, maybe even different models or brands. > Setting them all up manually is really tedious. Chirp makes it done in > few clicks. > > -- > 73 de Pedja YT9TP > > -- > This email has been checked for viruses by Avast antivirus software. > www.avast.com > > > ------------------------------ > > Message: 3 > Date: Thu, 20 Jun 2024 10:58:30 -0500 > From: Ken Hansen <ken(a)n2vip.org> > Subject: [users] Re: Two hosed Baofengs > To: CHIRP users list <users(a)lists.chirpmyradio.com> > Message-ID: <24B76FB4-B8C0-4B02-AA58-494736AFE21B(a)n2vip.org> > Content-Type: text/plain; charset=utf-8 > > Gary, > > I'm not sure what's going on with your particular setup, but CHIRP allows > countless thousands of happy users to successfully program their radios > from a wide variety of manufacturers. > > Jim's response to your earlier email described how Baofengs operate inside > the radio, and how CHIRP takes the users inputs from its spreadsheet > interface and properly populates the radio. > > If you take your GT-5R and read its current contents into CHIRP, are the > channels explained directly or not? > > If you save that data off to your HD, then create a brand new setup, > importing from repeaterbook or manually entering several repeater > frequencies into CHIRP then writing them to the radio, do they display/work > as you expect in the radio? > > Assuming your radio is properly programmed, the average Baofeng has decent > range (handful of miles) to a repeater when the HT is on the OEM antenna. > If you upgrade to a better antenna (say a SignalStik or a Diamond/Nagoya > antenna) you should have better luck hitting repeaters a bit further out > compared to the OEM antenna. > > In my experience, Baofengs are good for nearby repeaters and allstar > nodes, but quite challenging to use simplex (no repeater) in an urban area > (I learned this at a recent parade where the team decided to try 2m > simplex, and I couldn't hear most of the stations along the parade from my > parade route location). > > Other, major brand, HTs will undoubtedly perform better, but most HTs come > with antennas designed to fit in the box, not to maximize the performance > of the radio in the box. > > Good luck, > > Ken, N2VIP > > > On Jun 19, 2024, at 09:36, Gary via Users <users(a)lists.chirpmyradio.com> > wrote: > > > > After much deliberation, I have to ask an honest question: what is the > > purpose of Chirp? To be fair, all I have been using it for is my 2 > > Baofengs. I have a Wouxun KG-Q10H, but use its own programming software > so > > far because Chirp hasn’t picked it up yet. But if hooking up my ‘Fengs to > > Chirp does nothing more than populate a channel list with freqs, or > change > > the messages, maybe you can explain what Chirp really does, what it’s > > useful for. What are memories for if they can’t be programmed with Chirp? > > Why are the other settings there? > > > > It seems to me that, at least with Baofengs, Chirp is only useful for > > loading the radio with a list of downloaded repeaters…after that, each > > channel has to be manually “tuned” in VFO mode in order to process the > tone > > and split, at least. The memory list is just there for look-up. Am I > > missing something here? > > > > And the radios themselves seem to forget, or change even the manual > > settings. I have no idea on how to make individual frequency settings > stay > > after programming them. In Memory mode, in VFO mode, nothing stays as it > > was set. > > > > I guess it’s time to throw these junkers in the trash and actually spend > > some $$ on a real radio. > > > > 73, > > -= N4YVN =- > > ------------------------------ > > Message: 4 > Date: Thu, 20 Jun 2024 12:49:37 -0400 > From: Christopher Knowles <cknowles(a)tiac.net> > Subject: [users] Re: Two hosed Baofengs > To: users(a)lists.chirpmyradio.com > Message-ID: <5a873a42-a6bf-4d8b-8799-6654f3e85807(a)tiac.net> > Content-Type: text/plain; charset=UTF-8; format=flowed > > I have religiously used CHIRP on my HTs (all Baofeng (5-watt, > 8-watt, and 10-watt)) since I got my Technician license in May 2018 at > the age of 68. I got my General in July and my Extra in October. I > also got my Volunteer Examiner certification in October. After my HTs, > I bought a 25-watt Lexien "mobile" as my base station and then moved up > to a 50-watt BTECH UV-50X2 mobile. There are features in some of these > radios that can, for all intents and purposes, only be accessed with > CHIRP. It's the greatest! > > 73s, > > Christopher Knowles, WD1E > > > On 6/20/2024 11:58 AM, Ken Hansen via Users wrote: > > Gary, > > > > I'm not sure what's going on with your particular setup, but CHIRP > allows countless thousands of happy users to successfully program their > radios from a wide variety of manufacturers. > > > > Jim's response to your earlier email described how Baofengs operate > inside the radio, and how CHIRP takes the users inputs from its spreadsheet > interface and properly populates the radio. > > > > If you take your GT-5R and read its current contents into CHIRP, are the > channels explained directly or not? > > > > If you save that data off to your HD, then create a brand new setup, > importing from repeaterbook or manually entering several repeater > frequencies into CHIRP then writing them to the radio, do they display/work > as you expect in the radio? > > > > Assuming your radio is properly programmed, the average Baofeng has > decent range (handful of miles) to a repeater when the HT is on the OEM > antenna. If you upgrade to a better antenna (say a SignalStik or a > Diamond/Nagoya antenna) you should have better luck hitting repeaters a bit > further out compared to the OEM antenna. > > > > In my experience, Baofengs are good for nearby repeaters and allstar > nodes, but quite challenging to use simplex (no repeater) in an urban area > (I learned this at a recent parade where the team decided to try 2m > simplex, and I couldn't hear most of the stations along the parade from my > parade route location). > > > > Other, major brand, HTs will undoubtedly perform better, but most HTs > come with antennas designed to fit in the box, not to maximize the > performance of the radio in the box. > > > > Good luck, > > > > Ken, N2VIP > > > >> On Jun 19, 2024, at 09:36, Gary via Users <users(a)lists.chirpmyradio.com> > wrote: > >> > >> After much deliberation, I have to ask an honest question: what is the > >> purpose of Chirp? To be fair, all I have been using it for is my 2 > >> Baofengs. I have a Wouxun KG-Q10H, but use its own programming software > so > >> far because Chirp hasn’t picked it up yet. But if hooking up my ‘Fengs > to > >> Chirp does nothing more than populate a channel list with freqs, or > change > >> the messages, maybe you can explain what Chirp really does, what it’s > >> useful for. What are memories for if they can’t be programmed with > Chirp? > >> Why are the other settings there? > >> > >> It seems to me that, at least with Baofengs, Chirp is only useful for > >> loading the radio with a list of downloaded repeaters…after that, each > >> channel has to be manually “tuned” in VFO mode in order to process the > tone > >> and split, at least. The memory list is just there for look-up. Am I > >> missing something here? > >> > >> And the radios themselves seem to forget, or change even the manual > >> settings. I have no idea on how to make individual frequency settings > stay > >> after programming them. In Memory mode, in VFO mode, nothing stays as it > >> was set. > >> > >> I guess it’s time to throw these junkers in the trash and actually spend > >> some $$ on a real radio. > >> > >> 73, > >> -= N4YVN =- > > _______________________________________________ > > Users mailing list > > users(a)lists.chirpmyradio.com > > > https://lists.chirpmyradio.com/postorius/lists/users.lists.chirpmyradio.com > > To unsubscribe, send an email to users-leave(a)lists.chirpmyradio.com > > To report this email as off-topic, please email > users-owner(a)lists.chirpmyradio.com > > List archives: > https://lists.chirpmyradio.com/hyperkitty/list/users@lists.chirpmyradio.com/ > > -- > Christopher Allan Knowles, MPA > P.O. Box 4632 > Vineyard Haven, MA 02568 > > Please find my LinkedIn profile at: > https://www.linkedin.com/in/chris-knowles-99aba51a/ > > Staff Sergeant, United States Air Force, 1970 - 1974 > > Call Sign: WD1E - Amateur Extra Class > Accredited Volunteer Examiner (VE) > > > ------------------------------ > > Subject: Digest Footer > > _______________________________________________ > Users mailing list -- users(a)lists.chirpmyradio.com > To unsubscribe send an email to users-leave(a)lists.chirpmyradio.com > To unsubscribe, send an email to > chirp_users-unsubscribe(a)intrepid.danplanet.com > To report this email as off-topic, please email > chirp_users-owner(a)intrepid.danplanet.com > Searchable archive: > https://www.mail-archive.com/chirp_users@intrepid.danplanet.com > > ------------------------------ > > End of Users Digest, Vol 186, Issue 11 > ************************************** >

3 2

Re: Two hosed Baofengs
by Gary 20 Jun '24

20 Jun '24

Is this the correct one? -= Gary =- On Tue, Jun 11, 2024 at 16:09 Dan Smith <dsmith(a)danplanet.com> wrote: > Gary, you emailed the "list owner" address and not the list itself ( > users(a)lists.chirpmyradio.com). Please re-send to the proper destination > (or open a bug, which sounds more appropriate). > > --Dan > > > On Jun 11, 2024, at 12:42 PM, Gary <gary.barth(a)gmail.com> wrote: > > > > I have two ‘Fengs, a GT-5R and a BF-F9 V2+. I have programmed both > successfully several times, and decided to add another local repeater to > both lists. I have included a screen shot of the last attempt on the BF-F9. > I had just updated your software, and added the W3EPE repeater to the list > (which correctly shows every entry), saved and uploaded it to the radio. > > > > After disconnecting from Chirp, I attempted to access the repeater > (which is very close), and it failed. So I went into the radio menu, and > went to item #25 Offset. It was set to 000.000. Supposed to be -5.0Mhz. So > I manually set in on the keypad and exited. Tried the repeater again - no > joy. Checked the offset - 000.000. Decided to try the offset itself - > 444.375. No repeater, offset reset to 0. > > > > Checked several other freqs on the list - list says there is one, radio > shows 0. Uh-oh! Grabbed my GT-5R, and downloaded it to Chirp. Then > disconnected and tried several repeaters. All worked. Used the radio menu, > and the offsets were there. So I added the new repeater to that list and > uploaded the list to the radio. Now none of the repeaters work, and > manually checking the radio, all offsets have been reset to 0. They’re > correct on the Chirp list, but the radio (neither radio) doesn’t receive > the offset data, for some reason. AND - I can no longer manually set the > offset from the radio keyboard. As soon as I exit the menu the offset > returns to 0. Both radios are now like this. I reset the BF-F9 twice and > tried reprogramming it, with no success. > > > > Any idea what’s happening here? Chirp was working until the last update, > and now I can’t even manually set these offsets… > > > > TIA,<IMG_0067.jpg> > > > > -= Gary =- > >

9 12