- Users - lists.chirpmyradio.com

[chirp_users] Importing FRS/GMRS/MURS on Mac
by Ross Young 26 Jan '15

26 Jan '15

Hi guys, I love the software. I have been using it on both Linux and Mac and I noticed I cant find feature to import following stock configurations on the Mac version. Specifically I would like the ability to import the following: NOAA Weather Alert.csv US Calling Frequencies.csv US FRS and GMRS Channels.csv US MURS Channels.csv Any recommendations on how I should be able to find these imports on a default Mac install of the Chirp tool? Thank you, Ross

2 3

[chirp_users] IcomT70 and chirp
by Brian Carling 26 Jan '15

26 Jan '15

So I have an Icom T70A handheld I wish to program. I bought a nice FTDI cable to USB and 1/8" stereo plug. Installed the driver and chirp. Chirp can't read from the radio. All it does is put the radio into scan mode. Any idea what I'm doing wrong? Best regards - Brian Carling AF4K Crystals Co. 117 Sterling Pine St. Sanford, FL 32773 Tel: +USA 321-262-5471

4 4

[chirp_users] Baofeng cable
by Rick Osgood 26 Jan '15

26 Jan '15

Hi all, I bought a Baofeng branded cable and have now tried it on two different Windows laptops. Neither one sees the device. What cable really works with the F8HP? -- Rick Osgood

13 29

[chirp_users] unsubscribe
by Pasquale Lombardi 25 Jan '15

25 Jan '15

1 0

[chirp_users] Baofeng BF-F8HP
by Rick Osgood 24 Jan '15

24 Jan '15

Is this model supported by Chirp or can I select a different model? Windows 7 finally saw the usb connection and it is now listed as an unknown device? Thanks for the great work! -- Rick Osgood

7 9

[chirp_users] Error with chirp
by Tommy P 23 Jan '15

23 Jan '15

Hi, I had a question, I received an error Radio refused to send block 0x1ec0 when I try to upload, is there something I can do to meditate it, I use the latest version, thank you Sent from Yahoo Mail on Android

2 3

[chirp_users] New Daily Build
by Build System 23 Jan '15

23 Jan '15

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20150123 A list of the changes included in this build (since the last daily) follows: Changes for Build #319 [K. Arvanitis <kosta(a)alumni.uvic.ca>] [FT-60] Adding Support for Settings to Yaesu FT-60 Added support for most of the basic (but not all) settings avail. on the FT-60. Note: some settings map to the memory bank and are therefore not included in this list. Note: the list of settings and categories was taken from the user manual for this radio. Tested against the specific revision model no. FT-60R. Feature #1759 [Jens Jensen <af5mi(a)yahoo.com>] [th9800] add tuning steps per channel #1353 [Jens Jensen <af5mi(a)yahoo.com>] [th9800] add tx inhibit feature per channel #2229 add tx inhibit feature by setting txfreq and offset to 0. Causes RX to be normal, but when duplex=off, no TX and ERROR displayed along with beep. Note: Minor cosmetic side effect is that display indicates negative duplex offset, probably because 0 is always < rxfreq. This may be unavoidable unless we can find an actual channel flag which is designated for tx inhibit. Also added channel field "reverse" to map.

1 0

[chirp_users] Error with chirp
by Tommy P 22 Jan '15

22 Jan '15

Hi, I had a question, I received an error Radio refused to send block 0x1ec0 when I try to upload, is there something I can do to meditate it, I use the latest version, thank you Sent from Yahoo Mail on Android

1 0

[chirp_users] ★ Discussion of CHIRP, Brian Peterson left a message for you
by Brian Peterson 22 Jan '15

22 Jan '15

Brian Peterson left a message for you Its sender and content will be shown only to you and you can delete it at any time. You can instantly reply to it, using the message exchange system. To find out what was written to you, just follow this link: http://us1.blendr.com/brian.peterson.23/in/dnuCRX09mrc/?lang_id=106&g=57-0-… If clicking the links in this message does not work, copy and paste them into the address bar of your browser. This email is a part of delivering a message sent by Brian Peterson on the system. If you received this email by mistake, please just ignore it. After a short time the message will be removed from the system. Have fun! The Blendr Team Blendr is powered by Badoo. You have received this email from Badoo Trading Limited (postal address below). If you do not wish to receive further email communications from Badoo click here to opt out: http://us1.blendr.com/impersonation.phtml?lang_id=106&email=chirp_users%40i…. Badoo Trading Limited is a limited company registered in England and Wales under CRN 7540255 with its registered office at Media Village, 131 - 151 Great Titchfield Street, London, W1W 5BB.

1 0

[chirp_users] Offsets change when downloading to CHIRP
by Michael Sonnenblick 21 Jan '15

21 Jan '15

I have a TYT TH-UV3R. When I download my channels from my radio to CHIRP, CHIRP changes some, but not all, of the offsets. I first enter the frequencies into CHIRP and upload them to my radio. I check my radio and the offsets are correct. Then I download the frequencies back into CHIRP and see that the offsets have changed. If I were to re-upload them to my radio, then the wrong offsets would be uploaded. So anytime I need to add a channel, I need to redo all the changed offsets. As I mentioned, not all offsets are changed, but the ones that do change change whenever I download my channels to CHIRP.

2 3