November 2018 - Users - lists.chirpmyradio.com

[chirp_users] new rig YAESU FTM-7250D
by Samo Petelinc 12 Nov '18

12 Nov '18

Any plan to support Yaesu FTM-7250D, mobile transciver ??

1 0

[chirp_users] Anytone AT-778UV
by Raymond Lewis 10 Nov '18

10 Nov '18

Dennis, W9BOQ, was right, I typed in the wrong number for the Anytone that I am wanting to program. It is an AT-778UV, not what I posted the first time.73, Ray AA4EZ

1 0

[chirp_users] Communication Issues with new UV-5R EX
by Rich Freeman 09 Nov '18

09 Nov '18

I just purchased a UV-5R EX off of Amazon and am having trouble getting it to communicate with CHIRP. The same hardware/software config works just fine with my BF-F8HP. I get the problem whether I select Raddiodity/UV-5R EX or Baofeng/UV-5R. This is on linux, and I have the problem with the latest Mercurial commit as well as 20180906 and 20181018. I've also reproduced the problem on Windows, which also communicates just fine with the BF-F8HP just fine. I just unplug the one radio from the mic connection and plug in the other and it starts/stops working, so I'm pretty certain it isn't a driver/permissions/etc issue. This is with an FTDI-based USB cable. The radio reports its firmware version (when holding down 3) as BFS001. I couldn't tell you whether this is correct as it isn't communicating with CHIRP so I'm not getting more than that. I also tried fiddling with the baud settings on the serial device in linux and it didn't make any difference. Has anybody run into issues with newer radios? Is it possible there was a firmware change not handled by the software? I'm happy to debug or test patches/etc if helpful. The radio is just in factory config so I don't really care about losing any settings as long as it isn't bricked. -- Rich

6 9

[chirp_users] Chirp for Anytone AT-788UV
by Raymond Lewis 09 Nov '18

09 Nov '18

Does anyone know how to use Chirp to program an Anytone AT-788UV? I cannot find find programming software for the transceiver. Thanks, Ray

3 2

[chirp_users] New MacBook Pro Issue
by Phillip C 09 Nov '18

09 Nov '18

I have used CHIRP in the past with an older MacBook with no issues. Now I have the MacBook Pro 2018 with USB-C. -I have the Apple supplied FTDI drive & no others. -Only bluetooth shows up in the connect menu -I also am using a new Baofeng. I used to have the UV-5R but now I’m using a BF-F9HP which I understand is supposed to be a UV-5R variant. Do I select UV-5R or BF-F8 in the menu? Can anyone provide a starting point? Best regards, Phillip

4 4

[chirp_users] Zastone CN8DR and variants
by Howard Small 04 Nov '18

04 Nov '18

This radio is a tri-band (136-174/240-260/400-520) that appears as a number of brands including Zastone CN8DR, Veasu UV-8DR. Is there an equivalent model supported by Chirp? Howard, Vk4BS

1 0

[chirp_users] Programming a Baofeng GT3
by Calum Abernethy 02 Nov '18

02 Nov '18

A few of questions on the above subject when using Chirp:- Can you confirm when setting the ctcss codes for transmit and receive you use the columns 'tone' and 'tonesql' ? I have tried to set these columns to 67.0 but when uploaded to the radio they get set to 118.8. How do I fix this? I am trying to set up my radios to to talk to a friends Motorola T80 using a PMR a channel with a ctcss sub code. The Motorola uses a step of 12.5 on ctcss against an average of 2.5 on the Baofeng. Is there any way to alter the step sequence on the Baofeng? Cheers Calum

5 8