May 2017 - Users - lists.chirpmyradio.com

[chirp_users] More Wouxum KG-UV8D (plus) Programming
by William Liporace 26 May '17

26 May '17

OK, I was even more stumped!! Building and etc... I tried a couple of Chirp versions... The UV8D & UV8D plus are DIFFERENT radios. Took a bit of searching, but there is programming software on the Wouxom site! http://wouxun.com/download.aspx?flid=1093 Hope this helps someone else!! Would have saved a lot of work!! Let me know when Chirp Supports the radio... Yea, I will watch.... Will WC2L -- William Liporace WC2L http://www.wc2l.com or http://dxc.wc2l.com AR-Cluster Node telnet dxc.wc2l.com or 144.93 MHz wc2l(a)wc2l.com

1 0

[chirp_users] New Daily Build
by Build System 26 May '17

26 May '17

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20170526 A list of the changes included in this build (since the last daily) follows: Changes for Build #484 [Wade Simmons <wade(a)wades.im>] [FTM-3200D] Add support for Yaesu FTM-3200D This patch adds basic CHIRP support for programming the FTM-3200D. This radio shares most of its memory layout with the FT1D, so it has been created as a subclass of that radio. #4279

1 0

[chirp_users] Wouxum KG-UV8D (plus)
by William Liporace 25 May '17

25 May '17

I picked up a KG-UV8D(plus) at Dayton. Since I had a Baofeng UV-5R at home with the cable, all I got was the radio. I'm able to read the Baofeng, but not the Wouxum. I get the message saying "This radio driver is currently under development. There are no known issues with it, but you should proceed with caution.". Then I get a message saying "An error occurred, Radio did not respond". I think I have the latest build. TNX Will WC2L -- William Liporace WC2L http://www.wc2l.com or http://dxc.wc2l.com AR-Cluster Node telnet dxc.wc2l.com or 144.93 MHz wc2l(a)wc2l.com

2 2

[chirp_users] MacOS daily-20170501 repeatable crash
by Steve Sergeant 25 May '17

25 May '17

I just installed chirp-daily-20170501.app to try. I am attempting to copy setups from one Leixen VV-898E radio into several others. However, a fraction of a second after the screen fills with the data from the radio, Chirp unexpectedly quits, and I'm given the opportunity to send a report to Apple. My system is: Macbook Air 11" (MacBookAir6,1) MacOS X 10.11.6 (15G1421) 4GB RAM The last line in .chirp/debug.log reads: /Users/username/Applications/chirp-daily-20170501.app/Contents/MacOS/../Resources/chirp/chirpw:143: PangoWarning: Invalid UTF-8 string passed to pango_layout_set_text() gtk.main() I'm using the osx-pl2303-installer.pkg for my serial driver. This is currently the only radio for which I have a programming cable. Ideas?

6 8

[chirp_users] Windows 10
by Chas. Thompson 24 May '17

24 May '17

It is easy on Windows 10, the trick is to always use the same usb port that has the com# set and the right version of the driver. I have seen several people pick a random port to plug into and think that windows is changing the driver. The facat is they are changing what port they plug into. If someone is having too much trouble I can help over Teamviewer to remote help. Just email me if you are in that much need. Chas.

2 1

Re: [chirp_users] chirp_users Digest, Vol 101, Issue 20
by Bob Boehme 23 May '17

23 May '17

One way I found that has been great is to use a raspberry pi.. They now have a 7 inch display that bolts into a case with the pi and a lithium battery which means you can make it completely portable .. I’ve had not problems programming all of my radios with the pi.. From: chirp_users-bounces(a)intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Stuart Rauh Sent: Tuesday, May 23, 2017 6:22 AM To: roland kelts; Discussion of CHIRP Subject: Re: [chirp_users] chirp_users Digest, Vol 101, Issue 20 I have had absolutely no trouble with Windows 10 and Chirp. Works great! Stuart Rauh Stuart(a)Rauhnet.com On Mon, May 22, 2017 at 9:20 PM, roland kelts via chirp_users <chirp_users(a)intrepid.danplanet.com> wrote: people seem to have all kinds of problems with windows 10 maybe the whole system for that o.s. needs to be rewritten i couldn't get chirp to work at all wouldn't even load . Solution i found and old abandoned computer (dell) with an earlier os and now everything works!!! -------------------------------------------- On Sun, 5/21/17, <chirp_users-request(a)intrepid.danplanet.com> wrote: Subject: chirp_users Digest, Vol 101, Issue 20 To: chirp_users(a)intrepid.danplanet.com Date: Sunday, May 21, 2017, 12:00 PM Send chirp_users mailing list submissions to chirp_users(a)intrepid.danplanet.com To subscribe or unsubscribe via the World Wide Web, visit http://intrepid.danplanet.com/mailman/listinfo/chirp_users or, via email, send a message with subject or body 'help' to chirp_users-request(a)intrepid.danplanet.com You can reach the person managing the list at chirp_users-owner(a)intrepid.danplanet.com When replying, please edit your Subject line so it is more specific than "Re: Contents of chirp_users digest..." Today's Topics: 1. Re: Cannot read Baofeng BF-888S (Jim Unroe) 2. Re: Leixen VV-898E on MacOS? (was: ...daily-20170501 repeatable crash) (Rich Baker) 3. Re: Cannot read Baofeng BF-888S (Rich Baker) 4. Re: Leixen VV-898E on MacOS? (was: ...daily-20170501 repeatable crash) (Jardy Dawson) 5. Re: Cannot read Baofeng BF-888S (Jardy Dawson) 6. Re: Cannot read Baofeng BF-888S (Jim McCorison) 7. Re: Leixen VV-898E on MacOS? (was: ...daily-20170501 repeatable crash) (Rich Baker) 8. Re: Cannot read Baofeng BF-888S (Rich Baker) 9. Re: Cannot read Baofeng BF-888S (Jim McCorison) 10. FT2D (NNN Wx) 11. Re: chirp_users Digest, Vol 101, Issue 19 (Bob Decker) 12. Re: chirp_users Digest, Vol 101, Issue 19 (Carrie Jackson) 13. Re: Cannot read Baofeng BF-888S (Joe Puma) 14. Re: Cannot read Baofeng BF-888S (Joe Puma) ---------------------------------------------------------------------- Message: 1 Date: Sat, 20 May 2017 15:36:37 -0400 From: Jim Unroe <rock.unroe(a)gmail.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <CADnO8U4_wsaCLet=nu=0a90pNzdt=DQc+i7v0b_A_xXK9CTowA(a)mail.gmail.com <mailto:DQc%2Bi7v0b_A_xXK9CTowA@mail.gmail.com> > Content-Type: text/plain; charset="utf-8" On Sat, May 20, 2017 at 11:08 AM, Herb Gerhardt <hgerhardt(a)wavecable.com> wrote: > I have been fighting similar problems on Win10 on my Baofeng UV-5R+. I too > rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase > from HRO to work once I upgraded to Win10. It worked fine on Win7 and never > had a problem with the latest driver but would not work on Win10 till I > rolled the driver back. I then turned off the auto driver updates for this > device. Everything worked fine after rolling the driver back. > > A few months later when I tried to read the radio again, it would not > connect. I checked the driver and it was still the 3.2.0.0 driver in my > listing. It took me several days till I updated the driver to the latest > driver which of course did not work, but when I rolled it back again the > 3.2.0.0 driver from the pick list for this device, it began to work again. > Don't ask me what is going on but then set it back for auto updates. I will > now just roll the driver back every time I want to use this cable. > > I suggest you try to update your driver and then roll it back again to > 3.2.0.0 to see if that works for you. I know it sounds stupid but it is > worth a try since it worked for me. > > > Herb, KB7UVC > NW APRS Group, West Sound Coordinator > Our WEB Site: http://blog.nwaprs.info/ There is no need to disable updates. If Windows does update your Prolific driver, the previous driver is still installed. All you have to do is go into Device Manager and re-select the driver version that you want to use. I keep several Prolific driver versions installed and switch between then at will for testing purposes. Jim KC9HI -------------- next part -------------- A non-text attachment was scrubbed... Name: ProlificDrivers2.jpg Type: image/jpeg Size: 161541 bytes Desc: not available Url : http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/40… ------------------------------ Message: 2 Date: Sat, 20 May 2017 17:58:49 -0400 From: Rich Baker <rbakedq(a)gmail.com> Subject: Re: [chirp_users] Leixen VV-898E on MacOS? (was: ...daily-20170501 repeatable crash) To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <CAELWbPHggmTKrpxz-nTzfz-m2RxrEts0WSatBGaV3zZMA6V1ng(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" Unsubscribe me from this list NOW. On Sat, May 20, 2017 at 1:59 PM, Steve Sergeant <stevesgt(a)effable.com> wrote: > Just to ping the group again: > > Has anybody out there had recent luck programming the Leixen VV-898E > using a recent build of Chirp on MacOS? > > > > On 5/2/17 0:08 AM, Steve Sergeant wrote: > > I just installed chirp-daily-20170501.app to try. I am attempting to > > copy setups from one Leixen VV-898E radio into several others. > > > > However, a fraction of a second after the screen fills with the data > > from the radio, Chirp unexpectedly quits, and I'm given the opportunity > > to send a report to Apple. > > > > My system is: > > > > Macbook Air 11" (MacBookAir6,1) > > MacOS X 10.11.6 (15G1421) > > 4GB RAM > > > > The last line in .chirp/debug.log reads: > > /Users/username/Applications/chirp-daily-20170501.app/ > Contents/MacOS/../Resources/chirp/chirpw:143: > > PangoWarning: Invalid UTF-8 string passed to pango_layout_set_text() > > gtk.main() > > > > I'm using the osx-pl2303-installer.pkg for my serial driver. This is > > currently the only radio for which I have a programming cable. > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Rich at rbakedq(a)gmail.com > To unsubscribe, send an email to chirp_users-unsubscribe@ > intrepid.danplanet.com > -- S. Richard Baker 250 Furnace Dock Road Cortlandt Manor, NY 10567 Home: 914-736-1350 Cell: 917-922-2463 Email: rbakedq(a)gmail.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/00… ------------------------------ Message: 3 Date: Sat, 20 May 2017 17:59:05 -0400 From: Rich Baker <rbakedq(a)gmail.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <CAELWbPEYTesu5jWmSHgqmF70N6MrjqCZfYx0GmpYybU4fz4iQQ(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" Unsubscribe me from this list NOW. On Sat, May 20, 2017 at 3:36 PM, Jim Unroe <rock.unroe(a)gmail.com> wrote: > On Sat, May 20, 2017 at 11:08 AM, Herb Gerhardt <hgerhardt(a)wavecable.com> > wrote: > > I have been fighting similar problems on Win10 on my Baofeng UV-5R+. I > too > > rolled back the driver to 3.2.0.0 to get my "genuine" cable that I > purchase > > from HRO to work once I upgraded to Win10. It worked fine on Win7 and > never > > had a problem with the latest driver but would not work on Win10 till I > > rolled the driver back. I then turned off the auto driver updates for > this > > device. Everything worked fine after rolling the driver back. > > > > A few months later when I tried to read the radio again, it would not > > connect. I checked the driver and it was still the 3.2.0.0 driver in my > > listing. It took me several days till I updated the driver to the latest > > driver which of course did not work, but when I rolled it back again the > > 3.2.0.0 driver from the pick list for this device, it began to work > again. > > Don't ask me what is going on but then set it back for auto updates. I > will > > now just roll the driver back every time I want to use this cable. > > > > I suggest you try to update your driver and then roll it back again to > > 3.2.0.0 to see if that works for you. I know it sounds stupid but it is > > worth a try since it worked for me. > > > > > > Herb, KB7UVC > > NW APRS Group, West Sound Coordinator > > Our WEB Site: http://blog.nwaprs.info/ > > There is no need to disable updates. If Windows does update your > Prolific driver, the previous driver is still installed. All you have > to do is go into Device Manager and re-select the driver version that > you want to use. I keep several Prolific driver versions installed and > switch between then at will for testing purposes. > > Jim KC9HI > > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Rich at rbakedq(a)gmail.com > To unsubscribe, send an email to chirp_users-unsubscribe@ > intrepid.danplanet.com > -- S. Richard Baker 250 Furnace Dock Road Cortlandt Manor, NY 10567 Home: 914-736-1350 Cell: 917-922-2463 Email: rbakedq(a)gmail.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/3e… ------------------------------ Message: 4 Date: Sat, 20 May 2017 15:06:24 -0700 From: Jardy Dawson <jardy72(a)yahoo.com> Subject: Re: [chirp_users] Leixen VV-898E on MacOS? (was: ...daily-20170501 repeatable crash) To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <E64697DE-5BA1-4595-AC56-99B0663E9B06(a)yahoo.com> Content-Type: text/plain; charset="us-ascii" You have to do that yourself by READING THE LINKS AT THE BOTTOM OF EACH EMAIL. Jardy Dawson WA7JRD Ham Radio Message relayed from secret Hillary Clinton server, located in the basement of her house. OOPS, you aren't supposed to know that! On May 20, 2017, at 14:58, Rich Baker <rbakedq(a)gmail.com> wrote: Unsubscribe me from this list NOW. > On Sat, May 20, 2017 at 1:59 PM, Steve Sergeant <stevesgt(a)effable.com> wrote: > Just to ping the group again: > > Has anybody out there had recent luck programming the Leixen VV-898E > using a recent build of Chirp on MacOS? > > > > On 5/2/17 0:08 AM, Steve Sergeant wrote: > > I just installed chirp-daily-20170501.app to try. I am attempting to > > copy setups from one Leixen VV-898E radio into several others. > > > > However, a fraction of a second after the screen fills with the data > > from the radio, Chirp unexpectedly quits, and I'm given the opportunity > > to send a report to Apple. > > > > My system is: > > > > Macbook Air 11" (MacBookAir6,1) > > MacOS X 10.11.6 (15G1421) > > 4GB RAM > > > > The last line in .chirp/debug.log reads: > > /Users/username/Applications/chirp-daily-20170501.app/Contents/MacOS/../Resources/chirp/chirpw:143: > > PangoWarning: Invalid UTF-8 string passed to pango_layout_set_text() > > gtk.main() > > > > I'm using the osx-pl2303-installer.pkg for my serial driver. This is > > currently the only radio for which I have a programming cable. > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Rich at rbakedq(a)gmail.com > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com -- S. Richard Baker 250 Furnace Dock Road Cortlandt Manor, NY 10567 Home: 914-736-1350 Cell: 917-922-2463 Email: rbakedq(a)gmail.com _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72(a)yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/7b… ------------------------------ Message: 5 Date: Sat, 20 May 2017 15:07:04 -0700 From: Jardy Dawson <jardy72(a)yahoo.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <DA466B25-CD12-4633-B731-5B3B12630FC0(a)yahoo.com> Content-Type: text/plain; charset="us-ascii" Unsub yourself. Jardy Dawson WA7JRD Ham Radio Message relayed from secret Hillary Clinton server, located in the basement of her house. OOPS, you aren't supposed to know that! On May 20, 2017, at 14:59, Rich Baker <rbakedq(a)gmail.com> wrote: Unsubscribe me from this list NOW. > On Sat, May 20, 2017 at 3:36 PM, Jim Unroe <rock.unroe(a)gmail.com> wrote: > On Sat, May 20, 2017 at 11:08 AM, Herb Gerhardt <hgerhardt(a)wavecable.com> wrote: > > I have been fighting similar problems on Win10 on my Baofeng UV-5R+. I too > > rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase > > from HRO to work once I upgraded to Win10. It worked fine on Win7 and never > > had a problem with the latest driver but would not work on Win10 till I > > rolled the driver back. I then turned off the auto driver updates for this > > device. Everything worked fine after rolling the driver back. > > > > A few months later when I tried to read the radio again, it would not > > connect. I checked the driver and it was still the 3.2.0.0 driver in my > > listing. It took me several days till I updated the driver to the latest > > driver which of course did not work, but when I rolled it back again the > > 3.2.0.0 driver from the pick list for this device, it began to work again. > > Don't ask me what is going on but then set it back for auto updates. I will > > now just roll the driver back every time I want to use this cable. > > > > I suggest you try to update your driver and then roll it back again to > > 3.2.0.0 to see if that works for you. I know it sounds stupid but it is > > worth a try since it worked for me. > > > > > > Herb, KB7UVC > > NW APRS Group, West Sound Coordinator > > Our WEB Site: http://blog.nwaprs.info/ > > There is no need to disable updates. If Windows does update your > Prolific driver, the previous driver is still installed. All you have > to do is go into Device Manager and re-select the driver version that > you want to use. I keep several Prolific driver versions installed and > switch between then at will for testing purposes. > > Jim KC9HI > > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Rich at rbakedq(a)gmail.com > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com -- S. Richard Baker 250 Furnace Dock Road Cortlandt Manor, NY 10567 Home: 914-736-1350 Cell: 917-922-2463 Email: rbakedq(a)gmail.com _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72(a)yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/ef… ------------------------------ Message: 6 Date: Sat, 20 May 2017 15:06:24 -0700 From: Jim McCorison <jimmcc(a)mccorison.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <3E9DA26F-DC85-4AA2-9A7E-AF109E11437C(a)mccorison.com> Content-Type: text/plain; charset="us-ascii" Wow! What a polite request. I just can't try and help you fast enough. Not. Jim McCorison Orcas Island, WA > On May 20, 2017, at 2:59 PM, Rich Baker <rbakedq(a)gmail.com> wrote: > > Unsubscribe me from this list NOW. > >> On Sat, May 20, 2017 at 3:36 PM, Jim Unroe <rock.unroe(a)gmail.com> wrote: >> On Sat, May 20, 2017 at 11:08 AM, Herb Gerhardt <hgerhardt(a)wavecable.com> wrote: >> > I have been fighting similar problems on Win10 on my Baofeng UV-5R+. I too >> > rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase >> > from HRO to work once I upgraded to Win10. It worked fine on Win7 and never >> > had a problem with the latest driver but would not work on Win10 till I >> > rolled the driver back. I then turned off the auto driver updates for this >> > device. Everything worked fine after rolling the driver back. >> > >> > A few months later when I tried to read the radio again, it would not >> > connect. I checked the driver and it was still the 3.2.0.0 driver in my >> > listing. It took me several days till I updated the driver to the latest >> > driver which of course did not work, but when I rolled it back again the >> > 3.2.0.0 driver from the pick list for this device, it began to work again. >> > Don't ask me what is going on but then set it back for auto updates. I will >> > now just roll the driver back every time I want to use this cable. >> > >> > I suggest you try to update your driver and then roll it back again to >> > 3.2.0.0 to see if that works for you. I know it sounds stupid but it is >> > worth a try since it worked for me. >> > >> > >> > Herb, KB7UVC >> > NW APRS Group, West Sound Coordinator >> > Our WEB Site: http://blog.nwaprs.info/ >> >> There is no need to disable updates. If Windows does update your >> Prolific driver, the previous driver is still installed. All you have >> to do is go into Device Manager and re-select the driver version that >> you want to use. I keep several Prolific driver versions installed and >> switch between then at will for testing purposes. >> >> Jim KC9HI >> >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Rich at rbakedq(a)gmail.com >> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com > > > > -- > S. Richard Baker > 250 Furnace Dock Road > Cortlandt Manor, NY 10567 > > Home: 914-736-1350 > Cell: 917-922-2463 > Email: rbakedq(a)gmail.com > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to K2SON at jimmcc(a)mccorison.com > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/4f… ------------------------------ Message: 7 Date: Sat, 20 May 2017 19:29:42 -0400 From: Rich Baker <rbakedq(a)gmail.com> Subject: Re: [chirp_users] Leixen VV-898E on MacOS? (was: ...daily-20170501 repeatable crash) To: Jardy Dawson <jardy72(a)yahoo.com>, Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <CAELWbPGOpWuJE5WYt0n8CN9u8q9+PzH5swHspN+D6J=zBNbSFg(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" I have done that over 10 times now. It does not work. On Sat, May 20, 2017 at 6:06 PM, Jardy Dawson via chirp_users < chirp_users(a)intrepid.danplanet.com> wrote: > You have to do that yourself by READING THE LINKS AT THE BOTTOM OF EACH > EMAIL. > > Jardy Dawson > WA7JRD Ham Radio > > Message relayed from secret Hillary Clinton server, located in the > basement of her house. OOPS, you aren't supposed to know that! > > On May 20, 2017, at 14:58, Rich Baker <rbakedq(a)gmail.com> wrote: > > Unsubscribe me from this list NOW. > > On Sat, May 20, 2017 at 1:59 PM, Steve Sergeant <stevesgt(a)effable.com> > wrote: > >> Just to ping the group again: >> >> Has anybody out there had recent luck programming the Leixen VV-898E >> using a recent build of Chirp on MacOS? >> >> >> >> On 5/2/17 0:08 AM, Steve Sergeant wrote: >> > I just installed chirp-daily-20170501.app to try. I am attempting to >> > copy setups from one Leixen VV-898E radio into several others. >> > >> > However, a fraction of a second after the screen fills with the data >> > from the radio, Chirp unexpectedly quits, and I'm given the opportunity >> > to send a report to Apple. >> > >> > My system is: >> > >> > Macbook Air 11" (MacBookAir6,1) >> > MacOS X 10.11.6 (15G1421) >> > 4GB RAM >> > >> > The last line in .chirp/debug.log reads: >> > /Users/username/Applications/chirp-daily-20170501.app/Conten >> ts/MacOS/../Resources/chirp/chirpw:143: >> > PangoWarning: Invalid UTF-8 string passed to pango_layout_set_text() >> > gtk.main() >> > >> > I'm using the osx-pl2303-installer.pkg for my serial driver. This is >> > currently the only radio for which I have a programming cable. >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Rich at rbakedq(a)gmail.com >> To unsubscribe, send an email to chirp_users-unsubscribe@intrep >> id.danplanet.com >> > > > > -- > S. Richard Baker > 250 Furnace Dock Road > Cortlandt Manor, NY 10567 > > Home: 914-736-1350 <(914)%20736-1350> > Cell: 917-922-2463 <(917)%20922-2463> > Email: rbakedq(a)gmail.com > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Jardy at jardy72(a)yahoo.com > To unsubscribe, send an email to chirp_users-unsubscribe@ > intrepid.danplanet.com > > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Rich at rbakedq(a)gmail.com > To unsubscribe, send an email to chirp_users-unsubscribe@ > intrepid.danplanet.com > -- S. Richard Baker 250 Furnace Dock Road Cortlandt Manor, NY 10567 Home: 914-736-1350 Cell: 917-922-2463 Email: rbakedq(a)gmail.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/b1… ------------------------------ Message: 8 Date: Sat, 20 May 2017 19:30:55 -0400 From: Rich Baker <rbakedq(a)gmail.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <CAELWbPGYBw51s9AL8BoZuUighp_aUj05Dfj_vL9ZWKyqidhp=Q(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" Tried to unsubscribe over 10 times both on the website and by sending emails. On Sat, May 20, 2017 at 6:06 PM, Jim McCorison <jimmcc(a)mccorison.com> wrote: > Wow! What a polite request. I just can't try and help you fast enough. > > Not. > > Jim McCorison > Orcas Island, WA > > On May 20, 2017, at 2:59 PM, Rich Baker <rbakedq(a)gmail.com> wrote: > > Unsubscribe me from this list NOW. > > On Sat, May 20, 2017 at 3:36 PM, Jim Unroe <rock.unroe(a)gmail.com> wrote: > >> On Sat, May 20, 2017 at 11:08 AM, Herb Gerhardt <hgerhardt(a)wavecable.com> >> wrote: >> > I have been fighting similar problems on Win10 on my Baofeng UV-5R+. I >> too >> > rolled back the driver to 3.2.0.0 to get my "genuine" cable that I >> purchase >> > from HRO to work once I upgraded to Win10. It worked fine on Win7 and >> never >> > had a problem with the latest driver but would not work on Win10 till I >> > rolled the driver back. I then turned off the auto driver updates for >> this >> > device. Everything worked fine after rolling the driver back. >> > >> > A few months later when I tried to read the radio again, it would not >> > connect. I checked the driver and it was still the 3.2.0.0 driver in my >> > listing. It took me several days till I updated the driver to the >> latest >> > driver which of course did not work, but when I rolled it back again the >> > 3.2.0.0 driver from the pick list for this device, it began to work >> again. >> > Don't ask me what is going on but then set it back for auto updates. I >> will >> > now just roll the driver back every time I want to use this cable. >> > >> > I suggest you try to update your driver and then roll it back again to >> > 3.2.0.0 to see if that works for you. I know it sounds stupid but it is >> > worth a try since it worked for me. >> > >> > >> > Herb, KB7UVC >> > NW APRS Group, West Sound Coordinator >> > Our WEB Site: http://blog.nwaprs.info/ >> >> There is no need to disable updates. If Windows does update your >> Prolific driver, the previous driver is still installed. All you have >> to do is go into Device Manager and re-select the driver version that >> you want to use. I keep several Prolific driver versions installed and >> switch between then at will for testing purposes. >> >> Jim KC9HI >> >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Rich at rbakedq(a)gmail.com >> To unsubscribe, send an email to chirp_users-unsubscribe@intrep >> id.danplanet.com >> > > > > -- > S. Richard Baker > 250 Furnace Dock Road > Cortlandt Manor, NY 10567 > > Home: 914-736-1350 <(914)%20736-1350> > Cell: 917-922-2463 <(917)%20922-2463> > Email: rbakedq(a)gmail.com > > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to K2SON at jimmcc(a)mccorison.com > To unsubscribe, send an email to chirp_users-unsubscribe@ > intrepid.danplanet.com > > > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Rich at rbakedq(a)gmail.com > To unsubscribe, send an email to chirp_users-unsubscribe@ > intrepid.danplanet.com > -- S. Richard Baker 250 Furnace Dock Road Cortlandt Manor, NY 10567 Home: 914-736-1350 Cell: 917-922-2463 Email: rbakedq(a)gmail.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/70… ------------------------------ Message: 9 Date: Sat, 20 May 2017 18:03:34 -0700 From: Jim McCorison <jimmcc(a)mccorison.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <20885233-494D-4BE4-B06E-CDBE22B4C2BF(a)mccorison.com> Content-Type: text/plain; charset="utf-8" Perhaps it you reached out with a polite request along the lines of ?I?m having problems unsubscribing from this list. I?ve sent an unsubscribe request email without success and I?ve tried the website without success. Does any body have any ideas what I?m doing wrong?? Bonus points for sending it as a separate thread with s subject of something like ?Need help. Problems unsubscribing." Such an inquiry will probably get you a lot more assistance than just throwing a grenade into the mailing list. --- Jim McCorison Orcas Island, WA > On May 20, 2017, at 4:30 PM, Rich Baker <rbakedq(a)gmail.com> wrote: > > Tried to unsubscribe over 10 times both on the website and by sending emails. > > On Sat, May 20, 2017 at 6:06 PM, Jim McCorison <jimmcc(a)mccorison.com <mailto:jimmcc@mccorison.com>> wrote: > Wow! What a polite request. I just can't try and help you fast enough. > > Not. > > Jim McCorison > Orcas Island, WA > > On May 20, 2017, at 2:59 PM, Rich Baker <rbakedq(a)gmail.com <mailto:rbakedq@gmail.com>> wrote: > >> Unsubscribe me from this list NOW. >> >> On Sat, May 20, 2017 at 3:36 PM, Jim Unroe <rock.unroe(a)gmail.com <mailto:rock.unroe@gmail.com>> wrote: >> On Sat, May 20, 2017 at 11:08 AM, Herb Gerhardt <hgerhardt(a)wavecable.com <mailto:hgerhardt@wavecable.com>> wrote: >> > I have been fighting similar problems on Win10 on my Baofeng UV-5R+. I too >> > rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase >> > from HRO to work once I upgraded to Win10. It worked fine on Win7 and never >> > had a problem with the latest driver but would not work on Win10 till I >> > rolled the driver back. I then turned off the auto driver updates for this >> > device. Everything worked fine after rolling the driver back. >> > >> > A few months later when I tried to read the radio again, it would not >> > connect. I checked the driver and it was still the 3.2.0.0 driver in my >> > listing. It took me several days till I updated the driver to the latest >> > driver which of course did not work, but when I rolled it back again the >> > 3.2.0.0 driver from the pick list for this device, it began to work again. >> > Don't ask me what is going on but then set it back for auto updates. I will >> > now just roll the driver back every time I want to use this cable. >> > >> > I suggest you try to update your driver and then roll it back again to >> > 3.2.0.0 to see if that works for you. I know it sounds stupid but it is >> > worth a try since it worked for me. >> > >> > >> > Herb, KB7UVC >> > NW APRS Group, West Sound Coordinator >> > Our WEB Site: http://blog.nwaprs.info/ <http://blog.nwaprs.info/> >> >> There is no need to disable updates. If Windows does update your >> Prolific driver, the previous driver is still installed. All you have >> to do is go into Device Manager and re-select the driver version that >> you want to use. I keep several Prolific driver versions installed and >> switch between then at will for testing purposes. >> >> Jim KC9HI >> >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users <http://intrepid.danplanet.com/mailman/listinfo/chirp_users> >> This message was sent to Rich at rbakedq(a)gmail.com <mailto:rbakedq@gmail.com> >> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com> >> >> >> >> -- >> S. Richard Baker >> 250 Furnace Dock Road >> Cortlandt Manor, NY 10567 >> >> Home: 914-736-1350 <tel:(914)%20736-1350> >> Cell: 917-922-2463 <tel:(917)%20922-2463> >> Email: rbakedq(a)gmail.com <mailto:rbakedq@gmail.com>_______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users <http://intrepid.danplanet.com/mailman/listinfo/chirp_users> >> This message was sent to K2SON at jimmcc(a)mccorison.com <mailto:jimmcc@mccorison.com> >> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com> > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users <http://intrepid.danplanet.com/mailman/listinfo/chirp_users> > This message was sent to Rich at rbakedq(a)gmail.com <mailto:rbakedq@gmail.com> > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com> > > > > -- > S. Richard Baker > 250 Furnace Dock Road > Cortlandt Manor, NY 10567 > > Home: 914-736-1350 > Cell: 917-922-2463 > Email: rbakedq(a)gmail.com <mailto:rbakedq@gmail.com>_______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users <http://intrepid.danplanet.com/mailman/listinfo/chirp_users> > This message was sent to K2SON at jimmcc(a)mccorison.com <mailto:jimmcc@mccorison.com> > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com> -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/04… ------------------------------ Message: 10 Date: Sat, 20 May 2017 19:40:49 -0600 From: NNN Wx <nthreewx(a)gmail.com> Subject: [chirp_users] FT2D To: chirp_users(a)intrepid.danplanet.com Message-ID: <EB99DD23-C6B9-482B-AC28-220025DC2B3B(a)gmail.com> Content-Type: text/plain; charset=utf-8 I see ?bug? numbers 3325 and 3257 from last year, hoping support for Yaesu FT2D radio will work. It?s in the wish list, and doesn?t seem to need hardware for testing. I?m interested in getting chirp to work, and for some insights into how to get the serial connection to work on Macintosh OS X 10.12.5. HOW CAN I HELP (assuming this just needs effort)?? ------------------------------ Message: 11 Date: Sun, 21 May 2017 02:25:30 +0000 (UTC) From: Bob Decker <k7bd(a)yahoo.com> Subject: Re: [chirp_users] chirp_users Digest, Vol 101, Issue 19 To: "chirp_users(a)intrepid.danplanet.com" <chirp_users(a)intrepid.danplanet.com> Message-ID: <1930811399.2660365.1495333530472(a)mail.yahoo.com> Content-Type: text/plain; charset="utf-8" Your method of removal from list did not work. I must cut back mailwh9ch I do not use.? Remove my address. The only other way to remove youre-mail by listing it as spam.ThanksBob On Saturday, May 20, 2017 12:00 PM, "chirp_users-request(a)intrepid.danplanet.com" <chirp_users-request(a)intrepid.danplanet.com> wrote: Send chirp_users mailing list submissions to ??? chirp_users(a)intrepid.danplanet.com To subscribe or unsubscribe via the World Wide Web, visit ??? http://intrepid.danplanet.com/mailman/listinfo/chirp_users or, via email, send a message with subject or body 'help' to ??? chirp_users-request(a)intrepid.danplanet.com You can reach the person managing the list at ??? chirp_users-owner(a)intrepid.danplanet.com When replying, please edit your Subject line so it is more specific than "Re: Contents of chirp_users digest..." Today's Topics: ? 1. RepeaterBook Proximety Not Accurate? (John Kobeck) ? 2. Re: RepeaterBook Proximety Not Accurate? (Jim Unroe) ? 3. Re: Cannot read Baofeng BF-888S (Herb Gerhardt) ? 4. Re: Cannot read Baofeng BF-888S (Amnon Zohar) ? 5. Re: Cannot read Baofeng BF-888S (Glenn At Home) ? 6. Leixen VV-898E on MacOS? (was: ...daily-20170501??? repeatable ? ? ? crash) (Steve Sergeant) ---------------------------------------------------------------------- Message: 1 Date: Fri, 19 May 2017 23:04:47 -0400 From: John Kobeck <johnkobeck(a)me.com> Subject: [chirp_users] RepeaterBook Proximety Not Accurate? To: chirp_users(a)intrepid.danplanet.com Message-ID: <5F40902E-156A-415A-B687-A0118642A496(a)me.com> Content-Type: text/plain; charset=utf-8 Hello Chirpers; I have a question. I am trying to program repeaters into a Kenwood TMV7. I have been using RepeaterBooks Proximity search. When setting a Manhattan? zip code for example, it doesn?t seem to matter if I indicate a 100 mile radius or a 300 mile radius. It only seems pull about a 15 miles radius. Is there a default that won?t allow a larger range? 73s KC2MPG ------------------------------ Message: 2 Date: Sat, 20 May 2017 05:48:35 -0400 From: Jim Unroe <rock.unroe(a)gmail.com> Subject: Re: [chirp_users] RepeaterBook Proximety Not Accurate? To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: ??? <CADnO8U7LPAPZM6s2Y6mtYQd1qz+t+QNJR9xDXG_AAX2kbBvqug(a)mail.gmail.com <mailto:CADnO8U7LPAPZM6s2Y6mtYQd1qz%2Bt%2BQNJR9xDXG_AAX2kbBvqug@mail.gmail.com> > Content-Type: text/plain; charset="UTF-8" On Fri, May 19, 2017 at 11:04 PM, John Kobeck <johnkobeck(a)me.com> wrote: > > Hello Chirpers; > > I have a question. I am trying to program repeaters into a Kenwood TMV7. I have been using RepeaterBooks Proximity search. When setting a Manhattan? zip code for example, it doesn?t seem to matter if I indicate a 100 mile radius or a 300 mile radius. It only seems pull about a 15 miles radius. Is there a default that won?t allow a larger range? > > 73s > KC2MPG Using "Import from data source", "Location" = 10001 and "Band" = "2 meters (144MHz)", I the following numbers of repeaters are retrieved. Distance: # of repeaters 15: 50 100: 367 300: 1387 Jim KC9HI ------------------------------ Message: 3 Date: Sat, 20 May 2017 08:08:14 -0700 From: "Herb Gerhardt" <hgerhardt(a)wavecable.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: "'Discussion of CHIRP'" <chirp_users(a)intrepid.danplanet.com> Message-ID: <001301d2d17a$e7936ea0$b6ba4be0$@com> Content-Type: text/plain;??? charset="us-ascii" I have been fighting similar problems on Win10 on my Baofeng UV-5R+.? I too rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase from HRO to work once I upgraded to Win10.? It worked fine on Win7 and never had a problem with the latest driver but would not work on Win10 till I rolled the driver back.? I then turned off the auto driver updates for this device.? Everything worked fine after rolling the driver back. A few months later when I tried to read the radio again, it would not connect.? I checked the driver and it was still the 3.2.0.0 driver in my listing.? It took me several days till I updated the driver to the latest driver which of course did not work, but when I rolled it back again the 3.2.0.0 driver from the pick list for this device, it began to work again. Don't ask me what is going on but then set it back for auto updates.? I will now just roll the driver back every time I want to use this cable. I suggest you try to update your driver and then roll it back again to 3.2.0.0 to see if that works for you.? I know it sounds stupid but it is worth a try since it worked for me. Herb, KB7UVC NW APRS Group, West Sound Coordinator Our WEB Site:? http://blog.nwaprs.info/ -----Original Message----- From: chirp_users-bounces(a)intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of YT9TP - Pedja Sent: Friday, May 19, 2017 1:08 AM To: chirp_users(a)intrepid.danplanet.com Subject: [chirp_users] Cannot read Baofeng BF-888S I have strange issue with Windows 10, prolific serial adapter and BF-888S. It reports unable to download from radio. Driver is proper (version 3.2.0.0, update is disabled), and Chirp works fine with the same adapter and other radio (Baofeng UV-B5) reading and writing. I tried four different BF-888S and neither can be read. However, when I use the same USB adapter on my old Windows XP computer, Chirp easily reads and writes those BF-888S. Has anyone met with this problem? -- YT9TP, Pedja http://www.yt9tp.iz.rs --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus ------------------------------ Message: 4 Date: Sat, 20 May 2017 18:23:30 +0300 From: Amnon Zohar <amnon.zohar(a)gmail.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: ??? <CAN5HzcQAXwM2rBUjdtwkMCOb7_XfsmQ6PgMSqsc5M4B0i19F-A(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" I guess some update of win10 change some part of the driver without changing the driver version number. Redowngrading probably fix this. But this just a wild guess. The solution is important. The reason is less important ?????? 20 ???? 2017 18:09,? "Herb Gerhardt" <hgerhardt(a)wavecable.com> ???: > I have been fighting similar problems on Win10 on my Baofeng UV-5R+.? I too > rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase > from HRO to work once I upgraded to Win10.? It worked fine on Win7 and > never > had a problem with the latest driver but would not work on Win10 till I > rolled the driver back.? I then turned off the auto driver updates for this > device.? Everything worked fine after rolling the driver back. > > A few months later when I tried to read the radio again, it would not > connect.? I checked the driver and it was still the 3.2.0.0 driver in my > listing.? It took me several days till I updated the driver to the latest > driver which of course did not work, but when I rolled it back again the > 3.2.0.0 driver from the pick list for this device, it began to work again. > Don't ask me what is going on but then set it back for auto updates.? I > will > now just roll the driver back every time I want to use this cable. > > I suggest you try to update your driver and then roll it back again to > 3.2.0.0 to see if that works for you.? I know it sounds stupid but it is > worth a try since it worked for me. > > > Herb, KB7UVC > NW APRS Group, West Sound Coordinator > Our WEB Site:? http://blog.nwaprs.info/ > > > > > > -----Original Message----- > From: chirp_users-bounces(a)intrepid.danplanet.com > [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of YT9TP - > Pedja > Sent: Friday, May 19, 2017 1:08 AM > To: chirp_users(a)intrepid.danplanet.com > Subject: [chirp_users] Cannot read Baofeng BF-888S > > I have strange issue with Windows 10, prolific serial adapter and BF-888S. > It reports unable to download from radio. > > Driver is proper (version 3.2.0.0, update is disabled), and Chirp works > fine > with the same adapter and other radio (Baofeng UV-B5) reading and writing. > > I tried four different BF-888S and neither can be read. > > However, when I use the same USB adapter on my old Windows XP computer, > Chirp easily reads and writes those BF-888S. > > Has anyone met with this problem? > > -- > > YT9TP, Pedja > http://www.yt9tp.iz.rs > > > > --- > This email has been checked for viruses by Avast antivirus software. > https://www.avast.com/antivirus > > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to amnon at amnon.zohar(a)gmail.com > To unsubscribe, send an email to chirp_users-unsubscribe@ > intrepid.danplanet.com > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/ec… ------------------------------ Message: 5 Date: Sat, 20 May 2017 11:13:04 -0500 From: "Glenn At Home" <GlennErvin(a)cableone.net> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: "Discussion of CHIRP" <chirp_users(a)intrepid.danplanet.com> Message-ID: <047601d2d183$f683cf00$0601a8c0@NUCPPYH> Content-Type: text/plain; charset="utf-8" I wonder if you did not reboot windows soon enough to solidify the change. You would think that this would not matter, but maybe Windows needs to reboot for changes such as the driver setting. Glenn I have been fighting similar problems on Win10 on my Baofeng UV-5R+.? I too rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase from HRO to work once I upgraded to Win10.? It worked fine on Win7 and never had a problem with the latest driver but would not work on Win10 till I rolled the driver back.? I then turned off the auto driver updates for this device.? Everything worked fine after rolling the driver back. A few months later when I tried to read the radio again, it would not connect.? I checked the driver and it was still the 3.2.0.0 driver in my listing.? It took me several days till I updated the driver to the latest driver which of course did not work, but when I rolled it back again the 3.2.0.0 driver from the pick list for this device, it began to work again. Don't ask me what is going on but then set it back for auto updates.? I will now just roll the driver back every time I want to use this cable. I suggest you try to update your driver and then roll it back again to 3.2.0.0 to see if that works for you.? I know it sounds stupid but it is worth a try since it worked for me. Herb, KB7UVC NW APRS Group, West Sound Coordinator Our WEB Site:? http://blog.nwaprs.info/ -----Original Message----- From: chirp_users-bounces(a)intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of YT9TP - Pedja Sent: Friday, May 19, 2017 1:08 AM To: chirp_users(a)intrepid.danplanet.com Subject: [chirp_users] Cannot read Baofeng BF-888S I have strange issue with Windows 10, prolific serial adapter and BF-888S. It reports unable to download from radio. Driver is proper (version 3.2.0.0, update is disabled), and Chirp works fine with the same adapter and other radio (Baofeng UV-B5) reading and writing. I tried four different BF-888S and neither can be read. However, when I use the same USB adapter on my old Windows XP computer, Chirp easily reads and writes those BF-888S. Has anyone met with this problem? -- YT9TP, Pedja http://www.yt9tp.iz.rs --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to amnon at amnon.zohar(a)gmail.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com -------------------------------------------------------------------------------- _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Glenn at glennervin(a)cableone.net To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/c0… ------------------------------ Message: 6 Date: Sat, 20 May 2017 10:59:00 -0700 From: Steve Sergeant <stevesgt(a)effable.com> Subject: [chirp_users] Leixen VV-898E on MacOS? (was: ??? ...daily-20170501??? repeatable crash) To: chirp_users(a)intrepid.danplanet.com Message-ID: <7623fd03-20f3-5351-6a42-7fc3f405c22a(a)effable.com> Content-Type: text/plain; charset=utf-8 Just to ping the group again: Has anybody out there had recent luck programming the Leixen VV-898E using a recent build of Chirp on MacOS? On 5/2/17 0:08 AM, Steve Sergeant wrote: > I just installed chirp-daily-20170501.app to try. I am attempting to > copy setups from one Leixen VV-898E radio into several others. > > However, a fraction of a second after the screen fills with the data > from the radio, Chirp unexpectedly quits, and I'm given the opportunity > to send a report to Apple. > > My system is: > > Macbook Air 11" (MacBookAir6,1) > MacOS X 10.11.6 (15G1421) > 4GB RAM > > The last line in .chirp/debug.log reads: > /Users/username/Applications/chirp-daily-20170501.app/Contents/MacOS/../Resources/chirp/chirpw:143: > PangoWarning: Invalid UTF-8 string passed to pango_layout_set_text() >? gtk.main() > > I'm using the osx-pl2303-installer.pkg for my serial driver. This is > currently the only radio for which I have a programming cable. ------------------------------ _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com End of chirp_users Digest, Vol 101, Issue 19 ******************************************** -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170521/7b… ------------------------------ Message: 12 Date: Sat, 20 May 2017 21:28:16 -0500 From: Carrie Jackson <mssjacksonifyournasty(a)gmail.com> Subject: Re: [chirp_users] chirp_users Digest, Vol 101, Issue 19 To: Bob Decker <k7bd(a)yahoo.com>, Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <93a354da-a162-4ad8-a2e4-25a707fed0f1@Spark> Content-Type: text/plain; charset="utf-8" Carrie Jackson liked your e-mail Spark by Readdle (https://itunes.apple.com/app/id997102246?mt=8 <https://itunes.apple.com/app/id997102246?mt=8&uo=4&at=10l6UJ&ct=Spark_QR_vi…> &uo=4&at=10l6UJ&ct=Spark_QR_viral) Spark by Readdle (https://itunes.apple.com/app/id997102246?mt=8 <https://itunes.apple.com/app/id997102246?mt=8&uo=4&at=10l6UJ&ct=Spark_QR_vi…> &uo=4&at=10l6UJ&ct=Spark_QR_viral) -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/1b… ------------------------------ Message: 13 Date: Sun, 21 May 2017 13:58:24 -0400 From: Joe Puma <theprogramllc(a)yahoo.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <762A954A-D894-4632-A374-F805FE65E9A1(a)yahoo.com> Content-Type: text/plain; charset="us-ascii" Rich do it yourself. Read bottom of email. Sent from my iPhone > On May 20, 2017, at 5:59 PM, Rich Baker <rbakedq(a)gmail.com> wrote: > > Unsubscribe me from this list NOW. > >> On Sat, May 20, 2017 at 3:36 PM, Jim Unroe <rock.unroe(a)gmail.com> wrote: >> On Sat, May 20, 2017 at 11:08 AM, Herb Gerhardt <hgerhardt(a)wavecable.com> wrote: >> > I have been fighting similar problems on Win10 on my Baofeng UV-5R+. I too >> > rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase >> > from HRO to work once I upgraded to Win10. It worked fine on Win7 and never >> > had a problem with the latest driver but would not work on Win10 till I >> > rolled the driver back. I then turned off the auto driver updates for this >> > device. Everything worked fine after rolling the driver back. >> > >> > A few months later when I tried to read the radio again, it would not >> > connect. I checked the driver and it was still the 3.2.0.0 driver in my >> > listing. It took me several days till I updated the driver to the latest >> > driver which of course did not work, but when I rolled it back again the >> > 3.2.0.0 driver from the pick list for this device, it began to work again. >> > Don't ask me what is going on but then set it back for auto updates. I will >> > now just roll the driver back every time I want to use this cable. >> > >> > I suggest you try to update your driver and then roll it back again to >> > 3.2.0.0 to see if that works for you. I know it sounds stupid but it is >> > worth a try since it worked for me. >> > >> > >> > Herb, KB7UVC >> > NW APRS Group, West Sound Coordinator >> > Our WEB Site: http://blog.nwaprs.info/ >> >> There is no need to disable updates. If Windows does update your >> Prolific driver, the previous driver is still installed. All you have >> to do is go into Device Manager and re-select the driver version that >> you want to use. I keep several Prolific driver versions installed and >> switch between then at will for testing purposes. >> >> Jim KC9HI >> >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Rich at rbakedq(a)gmail.com >> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com > > > > -- > S. Richard Baker > 250 Furnace Dock Road > Cortlandt Manor, NY 10567 > > Home: 914-736-1350 > Cell: 917-922-2463 > Email: rbakedq(a)gmail.com > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Joe Puma at theprogramllc(a)yahoo.com > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170521/ec… ------------------------------ Message: 14 Date: Sun, 21 May 2017 13:59:32 -0400 From: Joe Puma <theprogramllc(a)yahoo.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <9FDE6A55-5F80-439E-AFFE-51E5AF484F0D(a)yahoo.com> Content-Type: text/plain; charset="us-ascii" Lol Sent from my iPhone > On May 20, 2017, at 6:06 PM, Jim McCorison <jimmcc(a)mccorison.com> wrote: > > Wow! What a polite request. I just can't try and help you fast enough. > > Not. > > Jim McCorison > Orcas Island, WA > >> On May 20, 2017, at 2:59 PM, Rich Baker <rbakedq(a)gmail.com> wrote: >> >> Unsubscribe me from this list NOW. >> >>> On Sat, May 20, 2017 at 3:36 PM, Jim Unroe <rock.unroe(a)gmail.com> wrote: >>> On Sat, May 20, 2017 at 11:08 AM, Herb Gerhardt <hgerhardt(a)wavecable.com> wrote: >>> > I have been fighting similar problems on Win10 on my Baofeng UV-5R+. I too >>> > rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase >>> > from HRO to work once I upgraded to Win10. It worked fine on Win7 and never >>> > had a problem with the latest driver but would not work on Win10 till I >>> > rolled the driver back. I then turned off the auto driver updates for this >>> > device. Everything worked fine after rolling the driver back. >>> > >>> > A few months later when I tried to read the radio again, it would not >>> > connect. I checked the driver and it was still the 3.2.0.0 driver in my >>> > listing. It took me several days till I updated the driver to the latest >>> > driver which of course did not work, but when I rolled it back again the >>> > 3.2.0.0 driver from the pick list for this device, it began to work again. >>> > Don't ask me what is going on but then set it back for auto updates. I will >>> > now just roll the driver back every time I want to use this cable. >>> > >>> > I suggest you try to update your driver and then roll it back again to >>> > 3.2.0.0 to see if that works for you. I know it sounds stupid but it is >>> > worth a try since it worked for me. >>> > >>> > >>> > Herb, KB7UVC >>> > NW APRS Group, West Sound Coordinator >>> > Our WEB Site: http://blog.nwaprs.info/ >>> >>> There is no need to disable updates. If Windows does update your >>> Prolific driver, the previous driver is still installed. All you have >>> to do is go into Device Manager and re-select the driver version that >>> you want to use. I keep several Prolific driver versions installed and >>> switch between then at will for testing purposes. >>> >>> Jim KC9HI >>> >>> _______________________________________________ >>> chirp_users mailing list >>> chirp_users(a)intrepid.danplanet.com >>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>> This message was sent to Rich at rbakedq(a)gmail.com >>> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com >> >> >> >> -- >> S. Richard Baker >> 250 Furnace Dock Road >> Cortlandt Manor, NY 10567 >> >> Home: 914-736-1350 >> Cell: 917-922-2463 >> Email: rbakedq(a)gmail.com >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to K2SON at jimmcc(a)mccorison.com >> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Joe Puma at theprogramllc(a)yahoo.com > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170521/16… ------------------------------ _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com End of chirp_users Digest, Vol 101, Issue 20 ******************************************** _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Stuart Rauh at stuart(a)rauhnet.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com

2 1

Re: [chirp_users] chirp_users Digest, Vol 101, Issue 20
by roland kelts 23 May '17

23 May '17

people seem to have all kinds of problems with windows 10 maybe the whole system for that o.s. needs to be rewritten i couldn't get chirp to work at all wouldn't even load . Solution i found and old abandoned computer (dell) with an earlier os and now everything works!!! -------------------------------------------- On Sun, 5/21/17, <chirp_users-request(a)intrepid.danplanet.com> wrote: Subject: chirp_users Digest, Vol 101, Issue 20 To: chirp_users(a)intrepid.danplanet.com Date: Sunday, May 21, 2017, 12:00 PM Send chirp_users mailing list submissions to chirp_users(a)intrepid.danplanet.com To subscribe or unsubscribe via the World Wide Web, visit http://intrepid.danplanet.com/mailman/listinfo/chirp_users or, via email, send a message with subject or body 'help' to chirp_users-request(a)intrepid.danplanet.com You can reach the person managing the list at chirp_users-owner(a)intrepid.danplanet.com When replying, please edit your Subject line so it is more specific than "Re: Contents of chirp_users digest..." Today's Topics: 1. Re: Cannot read Baofeng BF-888S (Jim Unroe) 2. Re: Leixen VV-898E on MacOS? (was: ...daily-20170501 repeatable crash) (Rich Baker) 3. Re: Cannot read Baofeng BF-888S (Rich Baker) 4. Re: Leixen VV-898E on MacOS? (was: ...daily-20170501 repeatable crash) (Jardy Dawson) 5. Re: Cannot read Baofeng BF-888S (Jardy Dawson) 6. Re: Cannot read Baofeng BF-888S (Jim McCorison) 7. Re: Leixen VV-898E on MacOS? (was: ...daily-20170501 repeatable crash) (Rich Baker) 8. Re: Cannot read Baofeng BF-888S (Rich Baker) 9. Re: Cannot read Baofeng BF-888S (Jim McCorison) 10. FT2D (NNN Wx) 11. Re: chirp_users Digest, Vol 101, Issue 19 (Bob Decker) 12. Re: chirp_users Digest, Vol 101, Issue 19 (Carrie Jackson) 13. Re: Cannot read Baofeng BF-888S (Joe Puma) 14. Re: Cannot read Baofeng BF-888S (Joe Puma) ---------------------------------------------------------------------- Message: 1 Date: Sat, 20 May 2017 15:36:37 -0400 From: Jim Unroe <rock.unroe(a)gmail.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <CADnO8U4_wsaCLet=nu=0a90pNzdt=DQc+i7v0b_A_xXK9CTowA(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" On Sat, May 20, 2017 at 11:08 AM, Herb Gerhardt <hgerhardt(a)wavecable.com> wrote: > I have been fighting similar problems on Win10 on my Baofeng UV-5R+. I too > rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase > from HRO to work once I upgraded to Win10. It worked fine on Win7 and never > had a problem with the latest driver but would not work on Win10 till I > rolled the driver back. I then turned off the auto driver updates for this > device. Everything worked fine after rolling the driver back. > > A few months later when I tried to read the radio again, it would not > connect. I checked the driver and it was still the 3.2.0.0 driver in my > listing. It took me several days till I updated the driver to the latest > driver which of course did not work, but when I rolled it back again the > 3.2.0.0 driver from the pick list for this device, it began to work again. > Don't ask me what is going on but then set it back for auto updates. I will > now just roll the driver back every time I want to use this cable. > > I suggest you try to update your driver and then roll it back again to > 3.2.0.0 to see if that works for you. I know it sounds stupid but it is > worth a try since it worked for me. > > > Herb, KB7UVC > NW APRS Group, West Sound Coordinator > Our WEB Site: http://blog.nwaprs.info/ There is no need to disable updates. If Windows does update your Prolific driver, the previous driver is still installed. All you have to do is go into Device Manager and re-select the driver version that you want to use. I keep several Prolific driver versions installed and switch between then at will for testing purposes. Jim KC9HI -------------- next part -------------- A non-text attachment was scrubbed... Name: ProlificDrivers2.jpg Type: image/jpeg Size: 161541 bytes Desc: not available Url : http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/40… ------------------------------ Message: 2 Date: Sat, 20 May 2017 17:58:49 -0400 From: Rich Baker <rbakedq(a)gmail.com> Subject: Re: [chirp_users] Leixen VV-898E on MacOS? (was: ...daily-20170501 repeatable crash) To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <CAELWbPHggmTKrpxz-nTzfz-m2RxrEts0WSatBGaV3zZMA6V1ng(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" Unsubscribe me from this list NOW. On Sat, May 20, 2017 at 1:59 PM, Steve Sergeant <stevesgt(a)effable.com> wrote: > Just to ping the group again: > > Has anybody out there had recent luck programming the Leixen VV-898E > using a recent build of Chirp on MacOS? > > > > On 5/2/17 0:08 AM, Steve Sergeant wrote: > > I just installed chirp-daily-20170501.app to try. I am attempting to > > copy setups from one Leixen VV-898E radio into several others. > > > > However, a fraction of a second after the screen fills with the data > > from the radio, Chirp unexpectedly quits, and I'm given the opportunity > > to send a report to Apple. > > > > My system is: > > > > Macbook Air 11" (MacBookAir6,1) > > MacOS X 10.11.6 (15G1421) > > 4GB RAM > > > > The last line in .chirp/debug.log reads: > > /Users/username/Applications/chirp-daily-20170501.app/ > Contents/MacOS/../Resources/chirp/chirpw:143: > > PangoWarning: Invalid UTF-8 string passed to pango_layout_set_text() > > gtk.main() > > > > I'm using the osx-pl2303-installer.pkg for my serial driver. This is > > currently the only radio for which I have a programming cable. > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Rich at rbakedq(a)gmail.com > To unsubscribe, send an email to chirp_users-unsubscribe@ > intrepid.danplanet.com > -- S. Richard Baker 250 Furnace Dock Road Cortlandt Manor, NY 10567 Home: 914-736-1350 Cell: 917-922-2463 Email: rbakedq(a)gmail.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/00… ------------------------------ Message: 3 Date: Sat, 20 May 2017 17:59:05 -0400 From: Rich Baker <rbakedq(a)gmail.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <CAELWbPEYTesu5jWmSHgqmF70N6MrjqCZfYx0GmpYybU4fz4iQQ(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" Unsubscribe me from this list NOW. On Sat, May 20, 2017 at 3:36 PM, Jim Unroe <rock.unroe(a)gmail.com> wrote: > On Sat, May 20, 2017 at 11:08 AM, Herb Gerhardt <hgerhardt(a)wavecable.com> > wrote: > > I have been fighting similar problems on Win10 on my Baofeng UV-5R+. I > too > > rolled back the driver to 3.2.0.0 to get my "genuine" cable that I > purchase > > from HRO to work once I upgraded to Win10. It worked fine on Win7 and > never > > had a problem with the latest driver but would not work on Win10 till I > > rolled the driver back. I then turned off the auto driver updates for > this > > device. Everything worked fine after rolling the driver back. > > > > A few months later when I tried to read the radio again, it would not > > connect. I checked the driver and it was still the 3.2.0.0 driver in my > > listing. It took me several days till I updated the driver to the latest > > driver which of course did not work, but when I rolled it back again the > > 3.2.0.0 driver from the pick list for this device, it began to work > again. > > Don't ask me what is going on but then set it back for auto updates. I > will > > now just roll the driver back every time I want to use this cable. > > > > I suggest you try to update your driver and then roll it back again to > > 3.2.0.0 to see if that works for you. I know it sounds stupid but it is > > worth a try since it worked for me. > > > > > > Herb, KB7UVC > > NW APRS Group, West Sound Coordinator > > Our WEB Site: http://blog.nwaprs.info/ > > There is no need to disable updates. If Windows does update your > Prolific driver, the previous driver is still installed. All you have > to do is go into Device Manager and re-select the driver version that > you want to use. I keep several Prolific driver versions installed and > switch between then at will for testing purposes. > > Jim KC9HI > > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Rich at rbakedq(a)gmail.com > To unsubscribe, send an email to chirp_users-unsubscribe@ > intrepid.danplanet.com > -- S. Richard Baker 250 Furnace Dock Road Cortlandt Manor, NY 10567 Home: 914-736-1350 Cell: 917-922-2463 Email: rbakedq(a)gmail.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/3e… ------------------------------ Message: 4 Date: Sat, 20 May 2017 15:06:24 -0700 From: Jardy Dawson <jardy72(a)yahoo.com> Subject: Re: [chirp_users] Leixen VV-898E on MacOS? (was: ...daily-20170501 repeatable crash) To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <E64697DE-5BA1-4595-AC56-99B0663E9B06(a)yahoo.com> Content-Type: text/plain; charset="us-ascii" You have to do that yourself by READING THE LINKS AT THE BOTTOM OF EACH EMAIL. Jardy Dawson WA7JRD Ham Radio Message relayed from secret Hillary Clinton server, located in the basement of her house. OOPS, you aren't supposed to know that! On May 20, 2017, at 14:58, Rich Baker <rbakedq(a)gmail.com> wrote: Unsubscribe me from this list NOW. > On Sat, May 20, 2017 at 1:59 PM, Steve Sergeant <stevesgt(a)effable.com> wrote: > Just to ping the group again: > > Has anybody out there had recent luck programming the Leixen VV-898E > using a recent build of Chirp on MacOS? > > > > On 5/2/17 0:08 AM, Steve Sergeant wrote: > > I just installed chirp-daily-20170501.app to try. I am attempting to > > copy setups from one Leixen VV-898E radio into several others. > > > > However, a fraction of a second after the screen fills with the data > > from the radio, Chirp unexpectedly quits, and I'm given the opportunity > > to send a report to Apple. > > > > My system is: > > > > Macbook Air 11" (MacBookAir6,1) > > MacOS X 10.11.6 (15G1421) > > 4GB RAM > > > > The last line in .chirp/debug.log reads: > > /Users/username/Applications/chirp-daily-20170501.app/Contents/MacOS/../Resources/chirp/chirpw:143: > > PangoWarning: Invalid UTF-8 string passed to pango_layout_set_text() > > gtk.main() > > > > I'm using the osx-pl2303-installer.pkg for my serial driver. This is > > currently the only radio for which I have a programming cable. > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Rich at rbakedq(a)gmail.com > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com -- S. Richard Baker 250 Furnace Dock Road Cortlandt Manor, NY 10567 Home: 914-736-1350 Cell: 917-922-2463 Email: rbakedq(a)gmail.com _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72(a)yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/7b… ------------------------------ Message: 5 Date: Sat, 20 May 2017 15:07:04 -0700 From: Jardy Dawson <jardy72(a)yahoo.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <DA466B25-CD12-4633-B731-5B3B12630FC0(a)yahoo.com> Content-Type: text/plain; charset="us-ascii" Unsub yourself. Jardy Dawson WA7JRD Ham Radio Message relayed from secret Hillary Clinton server, located in the basement of her house. OOPS, you aren't supposed to know that! On May 20, 2017, at 14:59, Rich Baker <rbakedq(a)gmail.com> wrote: Unsubscribe me from this list NOW. > On Sat, May 20, 2017 at 3:36 PM, Jim Unroe <rock.unroe(a)gmail.com> wrote: > On Sat, May 20, 2017 at 11:08 AM, Herb Gerhardt <hgerhardt(a)wavecable.com> wrote: > > I have been fighting similar problems on Win10 on my Baofeng UV-5R+. I too > > rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase > > from HRO to work once I upgraded to Win10. It worked fine on Win7 and never > > had a problem with the latest driver but would not work on Win10 till I > > rolled the driver back. I then turned off the auto driver updates for this > > device. Everything worked fine after rolling the driver back. > > > > A few months later when I tried to read the radio again, it would not > > connect. I checked the driver and it was still the 3.2.0.0 driver in my > > listing. It took me several days till I updated the driver to the latest > > driver which of course did not work, but when I rolled it back again the > > 3.2.0.0 driver from the pick list for this device, it began to work again. > > Don't ask me what is going on but then set it back for auto updates. I will > > now just roll the driver back every time I want to use this cable. > > > > I suggest you try to update your driver and then roll it back again to > > 3.2.0.0 to see if that works for you. I know it sounds stupid but it is > > worth a try since it worked for me. > > > > > > Herb, KB7UVC > > NW APRS Group, West Sound Coordinator > > Our WEB Site: http://blog.nwaprs.info/ > > There is no need to disable updates. If Windows does update your > Prolific driver, the previous driver is still installed. All you have > to do is go into Device Manager and re-select the driver version that > you want to use. I keep several Prolific driver versions installed and > switch between then at will for testing purposes. > > Jim KC9HI > > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Rich at rbakedq(a)gmail.com > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com -- S. Richard Baker 250 Furnace Dock Road Cortlandt Manor, NY 10567 Home: 914-736-1350 Cell: 917-922-2463 Email: rbakedq(a)gmail.com _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72(a)yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/ef… ------------------------------ Message: 6 Date: Sat, 20 May 2017 15:06:24 -0700 From: Jim McCorison <jimmcc(a)mccorison.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <3E9DA26F-DC85-4AA2-9A7E-AF109E11437C(a)mccorison.com> Content-Type: text/plain; charset="us-ascii" Wow! What a polite request. I just can't try and help you fast enough. Not. Jim McCorison Orcas Island, WA > On May 20, 2017, at 2:59 PM, Rich Baker <rbakedq(a)gmail.com> wrote: > > Unsubscribe me from this list NOW. > >> On Sat, May 20, 2017 at 3:36 PM, Jim Unroe <rock.unroe(a)gmail.com> wrote: >> On Sat, May 20, 2017 at 11:08 AM, Herb Gerhardt <hgerhardt(a)wavecable.com> wrote: >> > I have been fighting similar problems on Win10 on my Baofeng UV-5R+. I too >> > rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase >> > from HRO to work once I upgraded to Win10. It worked fine on Win7 and never >> > had a problem with the latest driver but would not work on Win10 till I >> > rolled the driver back. I then turned off the auto driver updates for this >> > device. Everything worked fine after rolling the driver back. >> > >> > A few months later when I tried to read the radio again, it would not >> > connect. I checked the driver and it was still the 3.2.0.0 driver in my >> > listing. It took me several days till I updated the driver to the latest >> > driver which of course did not work, but when I rolled it back again the >> > 3.2.0.0 driver from the pick list for this device, it began to work again. >> > Don't ask me what is going on but then set it back for auto updates. I will >> > now just roll the driver back every time I want to use this cable. >> > >> > I suggest you try to update your driver and then roll it back again to >> > 3.2.0.0 to see if that works for you. I know it sounds stupid but it is >> > worth a try since it worked for me. >> > >> > >> > Herb, KB7UVC >> > NW APRS Group, West Sound Coordinator >> > Our WEB Site: http://blog.nwaprs.info/ >> >> There is no need to disable updates. If Windows does update your >> Prolific driver, the previous driver is still installed. All you have >> to do is go into Device Manager and re-select the driver version that >> you want to use. I keep several Prolific driver versions installed and >> switch between then at will for testing purposes. >> >> Jim KC9HI >> >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Rich at rbakedq(a)gmail.com >> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com > > > > -- > S. Richard Baker > 250 Furnace Dock Road > Cortlandt Manor, NY 10567 > > Home: 914-736-1350 > Cell: 917-922-2463 > Email: rbakedq(a)gmail.com > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to K2SON at jimmcc(a)mccorison.com > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/4f… ------------------------------ Message: 7 Date: Sat, 20 May 2017 19:29:42 -0400 From: Rich Baker <rbakedq(a)gmail.com> Subject: Re: [chirp_users] Leixen VV-898E on MacOS? (was: ...daily-20170501 repeatable crash) To: Jardy Dawson <jardy72(a)yahoo.com>, Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <CAELWbPGOpWuJE5WYt0n8CN9u8q9+PzH5swHspN+D6J=zBNbSFg(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" I have done that over 10 times now. It does not work. On Sat, May 20, 2017 at 6:06 PM, Jardy Dawson via chirp_users < chirp_users(a)intrepid.danplanet.com> wrote: > You have to do that yourself by READING THE LINKS AT THE BOTTOM OF EACH > EMAIL. > > Jardy Dawson > WA7JRD Ham Radio > > Message relayed from secret Hillary Clinton server, located in the > basement of her house. OOPS, you aren't supposed to know that! > > On May 20, 2017, at 14:58, Rich Baker <rbakedq(a)gmail.com> wrote: > > Unsubscribe me from this list NOW. > > On Sat, May 20, 2017 at 1:59 PM, Steve Sergeant <stevesgt(a)effable.com> > wrote: > >> Just to ping the group again: >> >> Has anybody out there had recent luck programming the Leixen VV-898E >> using a recent build of Chirp on MacOS? >> >> >> >> On 5/2/17 0:08 AM, Steve Sergeant wrote: >> > I just installed chirp-daily-20170501.app to try. I am attempting to >> > copy setups from one Leixen VV-898E radio into several others. >> > >> > However, a fraction of a second after the screen fills with the data >> > from the radio, Chirp unexpectedly quits, and I'm given the opportunity >> > to send a report to Apple. >> > >> > My system is: >> > >> > Macbook Air 11" (MacBookAir6,1) >> > MacOS X 10.11.6 (15G1421) >> > 4GB RAM >> > >> > The last line in .chirp/debug.log reads: >> > /Users/username/Applications/chirp-daily-20170501.app/Conten >> ts/MacOS/../Resources/chirp/chirpw:143: >> > PangoWarning: Invalid UTF-8 string passed to pango_layout_set_text() >> > gtk.main() >> > >> > I'm using the osx-pl2303-installer.pkg for my serial driver. This is >> > currently the only radio for which I have a programming cable. >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Rich at rbakedq(a)gmail.com >> To unsubscribe, send an email to chirp_users-unsubscribe@intrep >> id.danplanet.com >> > > > > -- > S. Richard Baker > 250 Furnace Dock Road > Cortlandt Manor, NY 10567 > > Home: 914-736-1350 <(914)%20736-1350> > Cell: 917-922-2463 <(917)%20922-2463> > Email: rbakedq(a)gmail.com > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Jardy at jardy72(a)yahoo.com > To unsubscribe, send an email to chirp_users-unsubscribe@ > intrepid.danplanet.com > > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Rich at rbakedq(a)gmail.com > To unsubscribe, send an email to chirp_users-unsubscribe@ > intrepid.danplanet.com > -- S. Richard Baker 250 Furnace Dock Road Cortlandt Manor, NY 10567 Home: 914-736-1350 Cell: 917-922-2463 Email: rbakedq(a)gmail.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/b1… ------------------------------ Message: 8 Date: Sat, 20 May 2017 19:30:55 -0400 From: Rich Baker <rbakedq(a)gmail.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <CAELWbPGYBw51s9AL8BoZuUighp_aUj05Dfj_vL9ZWKyqidhp=Q(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" Tried to unsubscribe over 10 times both on the website and by sending emails. On Sat, May 20, 2017 at 6:06 PM, Jim McCorison <jimmcc(a)mccorison.com> wrote: > Wow! What a polite request. I just can't try and help you fast enough. > > Not. > > Jim McCorison > Orcas Island, WA > > On May 20, 2017, at 2:59 PM, Rich Baker <rbakedq(a)gmail.com> wrote: > > Unsubscribe me from this list NOW. > > On Sat, May 20, 2017 at 3:36 PM, Jim Unroe <rock.unroe(a)gmail.com> wrote: > >> On Sat, May 20, 2017 at 11:08 AM, Herb Gerhardt <hgerhardt(a)wavecable.com> >> wrote: >> > I have been fighting similar problems on Win10 on my Baofeng UV-5R+. I >> too >> > rolled back the driver to 3.2.0.0 to get my "genuine" cable that I >> purchase >> > from HRO to work once I upgraded to Win10. It worked fine on Win7 and >> never >> > had a problem with the latest driver but would not work on Win10 till I >> > rolled the driver back. I then turned off the auto driver updates for >> this >> > device. Everything worked fine after rolling the driver back. >> > >> > A few months later when I tried to read the radio again, it would not >> > connect. I checked the driver and it was still the 3.2.0.0 driver in my >> > listing. It took me several days till I updated the driver to the >> latest >> > driver which of course did not work, but when I rolled it back again the >> > 3.2.0.0 driver from the pick list for this device, it began to work >> again. >> > Don't ask me what is going on but then set it back for auto updates. I >> will >> > now just roll the driver back every time I want to use this cable. >> > >> > I suggest you try to update your driver and then roll it back again to >> > 3.2.0.0 to see if that works for you. I know it sounds stupid but it is >> > worth a try since it worked for me. >> > >> > >> > Herb, KB7UVC >> > NW APRS Group, West Sound Coordinator >> > Our WEB Site: http://blog.nwaprs.info/ >> >> There is no need to disable updates. If Windows does update your >> Prolific driver, the previous driver is still installed. All you have >> to do is go into Device Manager and re-select the driver version that >> you want to use. I keep several Prolific driver versions installed and >> switch between then at will for testing purposes. >> >> Jim KC9HI >> >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Rich at rbakedq(a)gmail.com >> To unsubscribe, send an email to chirp_users-unsubscribe@intrep >> id.danplanet.com >> > > > > -- > S. Richard Baker > 250 Furnace Dock Road > Cortlandt Manor, NY 10567 > > Home: 914-736-1350 <(914)%20736-1350> > Cell: 917-922-2463 <(917)%20922-2463> > Email: rbakedq(a)gmail.com > > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to K2SON at jimmcc(a)mccorison.com > To unsubscribe, send an email to chirp_users-unsubscribe@ > intrepid.danplanet.com > > > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Rich at rbakedq(a)gmail.com > To unsubscribe, send an email to chirp_users-unsubscribe@ > intrepid.danplanet.com > -- S. Richard Baker 250 Furnace Dock Road Cortlandt Manor, NY 10567 Home: 914-736-1350 Cell: 917-922-2463 Email: rbakedq(a)gmail.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/70… ------------------------------ Message: 9 Date: Sat, 20 May 2017 18:03:34 -0700 From: Jim McCorison <jimmcc(a)mccorison.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <20885233-494D-4BE4-B06E-CDBE22B4C2BF(a)mccorison.com> Content-Type: text/plain; charset="utf-8" Perhaps it you reached out with a polite request along the lines of ?I?m having problems unsubscribing from this list. I?ve sent an unsubscribe request email without success and I?ve tried the website without success. Does any body have any ideas what I?m doing wrong?? Bonus points for sending it as a separate thread with s subject of something like ?Need help. Problems unsubscribing." Such an inquiry will probably get you a lot more assistance than just throwing a grenade into the mailing list. --- Jim McCorison Orcas Island, WA > On May 20, 2017, at 4:30 PM, Rich Baker <rbakedq(a)gmail.com> wrote: > > Tried to unsubscribe over 10 times both on the website and by sending emails. > > On Sat, May 20, 2017 at 6:06 PM, Jim McCorison <jimmcc(a)mccorison.com <mailto:jimmcc@mccorison.com>> wrote: > Wow! What a polite request. I just can't try and help you fast enough. > > Not. > > Jim McCorison > Orcas Island, WA > > On May 20, 2017, at 2:59 PM, Rich Baker <rbakedq(a)gmail.com <mailto:rbakedq@gmail.com>> wrote: > >> Unsubscribe me from this list NOW. >> >> On Sat, May 20, 2017 at 3:36 PM, Jim Unroe <rock.unroe(a)gmail.com <mailto:rock.unroe@gmail.com>> wrote: >> On Sat, May 20, 2017 at 11:08 AM, Herb Gerhardt <hgerhardt(a)wavecable.com <mailto:hgerhardt@wavecable.com>> wrote: >> > I have been fighting similar problems on Win10 on my Baofeng UV-5R+. I too >> > rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase >> > from HRO to work once I upgraded to Win10. It worked fine on Win7 and never >> > had a problem with the latest driver but would not work on Win10 till I >> > rolled the driver back. I then turned off the auto driver updates for this >> > device. Everything worked fine after rolling the driver back. >> > >> > A few months later when I tried to read the radio again, it would not >> > connect. I checked the driver and it was still the 3.2.0.0 driver in my >> > listing. It took me several days till I updated the driver to the latest >> > driver which of course did not work, but when I rolled it back again the >> > 3.2.0.0 driver from the pick list for this device, it began to work again. >> > Don't ask me what is going on but then set it back for auto updates. I will >> > now just roll the driver back every time I want to use this cable. >> > >> > I suggest you try to update your driver and then roll it back again to >> > 3.2.0.0 to see if that works for you. I know it sounds stupid but it is >> > worth a try since it worked for me. >> > >> > >> > Herb, KB7UVC >> > NW APRS Group, West Sound Coordinator >> > Our WEB Site: http://blog.nwaprs.info/ <http://blog.nwaprs.info/> >> >> There is no need to disable updates. If Windows does update your >> Prolific driver, the previous driver is still installed. All you have >> to do is go into Device Manager and re-select the driver version that >> you want to use. I keep several Prolific driver versions installed and >> switch between then at will for testing purposes. >> >> Jim KC9HI >> >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users <http://intrepid.danplanet.com/mailman/listinfo/chirp_users> >> This message was sent to Rich at rbakedq(a)gmail.com <mailto:rbakedq@gmail.com> >> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com> >> >> >> >> -- >> S. Richard Baker >> 250 Furnace Dock Road >> Cortlandt Manor, NY 10567 >> >> Home: 914-736-1350 <tel:(914)%20736-1350> >> Cell: 917-922-2463 <tel:(917)%20922-2463> >> Email: rbakedq(a)gmail.com <mailto:rbakedq@gmail.com>_______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users <http://intrepid.danplanet.com/mailman/listinfo/chirp_users> >> This message was sent to K2SON at jimmcc(a)mccorison.com <mailto:jimmcc@mccorison.com> >> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com> > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users <http://intrepid.danplanet.com/mailman/listinfo/chirp_users> > This message was sent to Rich at rbakedq(a)gmail.com <mailto:rbakedq@gmail.com> > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com> > > > > -- > S. Richard Baker > 250 Furnace Dock Road > Cortlandt Manor, NY 10567 > > Home: 914-736-1350 > Cell: 917-922-2463 > Email: rbakedq(a)gmail.com <mailto:rbakedq@gmail.com>_______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users <http://intrepid.danplanet.com/mailman/listinfo/chirp_users> > This message was sent to K2SON at jimmcc(a)mccorison.com <mailto:jimmcc@mccorison.com> > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com> -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/04… ------------------------------ Message: 10 Date: Sat, 20 May 2017 19:40:49 -0600 From: NNN Wx <nthreewx(a)gmail.com> Subject: [chirp_users] FT2D To: chirp_users(a)intrepid.danplanet.com Message-ID: <EB99DD23-C6B9-482B-AC28-220025DC2B3B(a)gmail.com> Content-Type: text/plain; charset=utf-8 I see ?bug? numbers 3325 and 3257 from last year, hoping support for Yaesu FT2D radio will work. It?s in the wish list, and doesn?t seem to need hardware for testing. I?m interested in getting chirp to work, and for some insights into how to get the serial connection to work on Macintosh OS X 10.12.5. HOW CAN I HELP (assuming this just needs effort)?? ------------------------------ Message: 11 Date: Sun, 21 May 2017 02:25:30 +0000 (UTC) From: Bob Decker <k7bd(a)yahoo.com> Subject: Re: [chirp_users] chirp_users Digest, Vol 101, Issue 19 To: "chirp_users(a)intrepid.danplanet.com" <chirp_users(a)intrepid.danplanet.com> Message-ID: <1930811399.2660365.1495333530472(a)mail.yahoo.com> Content-Type: text/plain; charset="utf-8" Your method of removal from list did not work. I must cut back mailwh9ch I do not use.? Remove my address. The only other way to remove youre-mail by listing it as spam.ThanksBob On Saturday, May 20, 2017 12:00 PM, "chirp_users-request(a)intrepid.danplanet.com" <chirp_users-request(a)intrepid.danplanet.com> wrote: Send chirp_users mailing list submissions to ??? chirp_users(a)intrepid.danplanet.com To subscribe or unsubscribe via the World Wide Web, visit ??? http://intrepid.danplanet.com/mailman/listinfo/chirp_users or, via email, send a message with subject or body 'help' to ??? chirp_users-request(a)intrepid.danplanet.com You can reach the person managing the list at ??? chirp_users-owner(a)intrepid.danplanet.com When replying, please edit your Subject line so it is more specific than "Re: Contents of chirp_users digest..." Today's Topics: ? 1. RepeaterBook Proximety Not Accurate? (John Kobeck) ? 2. Re: RepeaterBook Proximety Not Accurate? (Jim Unroe) ? 3. Re: Cannot read Baofeng BF-888S (Herb Gerhardt) ? 4. Re: Cannot read Baofeng BF-888S (Amnon Zohar) ? 5. Re: Cannot read Baofeng BF-888S (Glenn At Home) ? 6. Leixen VV-898E on MacOS? (was: ...daily-20170501??? repeatable ? ? ? crash) (Steve Sergeant) ---------------------------------------------------------------------- Message: 1 Date: Fri, 19 May 2017 23:04:47 -0400 From: John Kobeck <johnkobeck(a)me.com> Subject: [chirp_users] RepeaterBook Proximety Not Accurate? To: chirp_users(a)intrepid.danplanet.com Message-ID: <5F40902E-156A-415A-B687-A0118642A496(a)me.com> Content-Type: text/plain; charset=utf-8 Hello Chirpers; I have a question. I am trying to program repeaters into a Kenwood TMV7. I have been using RepeaterBooks Proximity search. When setting a Manhattan? zip code for example, it doesn?t seem to matter if I indicate a 100 mile radius or a 300 mile radius. It only seems pull about a 15 miles radius. Is there a default that won?t allow a larger range? 73s KC2MPG ------------------------------ Message: 2 Date: Sat, 20 May 2017 05:48:35 -0400 From: Jim Unroe <rock.unroe(a)gmail.com> Subject: Re: [chirp_users] RepeaterBook Proximety Not Accurate? To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: ??? <CADnO8U7LPAPZM6s2Y6mtYQd1qz+t+QNJR9xDXG_AAX2kbBvqug(a)mail.gmail.com> Content-Type: text/plain; charset="UTF-8" On Fri, May 19, 2017 at 11:04 PM, John Kobeck <johnkobeck(a)me.com> wrote: > > Hello Chirpers; > > I have a question. I am trying to program repeaters into a Kenwood TMV7. I have been using RepeaterBooks Proximity search. When setting a Manhattan? zip code for example, it doesn?t seem to matter if I indicate a 100 mile radius or a 300 mile radius. It only seems pull about a 15 miles radius. Is there a default that won?t allow a larger range? > > 73s > KC2MPG Using "Import from data source", "Location" = 10001 and "Band" = "2 meters (144MHz)", I the following numbers of repeaters are retrieved. Distance: # of repeaters 15: 50 100: 367 300: 1387 Jim KC9HI ------------------------------ Message: 3 Date: Sat, 20 May 2017 08:08:14 -0700 From: "Herb Gerhardt" <hgerhardt(a)wavecable.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: "'Discussion of CHIRP'" <chirp_users(a)intrepid.danplanet.com> Message-ID: <001301d2d17a$e7936ea0$b6ba4be0$@com> Content-Type: text/plain;??? charset="us-ascii" I have been fighting similar problems on Win10 on my Baofeng UV-5R+.? I too rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase from HRO to work once I upgraded to Win10.? It worked fine on Win7 and never had a problem with the latest driver but would not work on Win10 till I rolled the driver back.? I then turned off the auto driver updates for this device.? Everything worked fine after rolling the driver back. A few months later when I tried to read the radio again, it would not connect.? I checked the driver and it was still the 3.2.0.0 driver in my listing.? It took me several days till I updated the driver to the latest driver which of course did not work, but when I rolled it back again the 3.2.0.0 driver from the pick list for this device, it began to work again. Don't ask me what is going on but then set it back for auto updates.? I will now just roll the driver back every time I want to use this cable. I suggest you try to update your driver and then roll it back again to 3.2.0.0 to see if that works for you.? I know it sounds stupid but it is worth a try since it worked for me. Herb, KB7UVC NW APRS Group, West Sound Coordinator Our WEB Site:? http://blog.nwaprs.info/ -----Original Message----- From: chirp_users-bounces(a)intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of YT9TP - Pedja Sent: Friday, May 19, 2017 1:08 AM To: chirp_users(a)intrepid.danplanet.com Subject: [chirp_users] Cannot read Baofeng BF-888S I have strange issue with Windows 10, prolific serial adapter and BF-888S. It reports unable to download from radio. Driver is proper (version 3.2.0.0, update is disabled), and Chirp works fine with the same adapter and other radio (Baofeng UV-B5) reading and writing. I tried four different BF-888S and neither can be read. However, when I use the same USB adapter on my old Windows XP computer, Chirp easily reads and writes those BF-888S. Has anyone met with this problem? -- YT9TP, Pedja http://www.yt9tp.iz.rs --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus ------------------------------ Message: 4 Date: Sat, 20 May 2017 18:23:30 +0300 From: Amnon Zohar <amnon.zohar(a)gmail.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: ??? <CAN5HzcQAXwM2rBUjdtwkMCOb7_XfsmQ6PgMSqsc5M4B0i19F-A(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" I guess some update of win10 change some part of the driver without changing the driver version number. Redowngrading probably fix this. But this just a wild guess. The solution is important. The reason is less important ?????? 20 ???? 2017 18:09,? "Herb Gerhardt" <hgerhardt(a)wavecable.com> ???: > I have been fighting similar problems on Win10 on my Baofeng UV-5R+.? I too > rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase > from HRO to work once I upgraded to Win10.? It worked fine on Win7 and > never > had a problem with the latest driver but would not work on Win10 till I > rolled the driver back.? I then turned off the auto driver updates for this > device.? Everything worked fine after rolling the driver back. > > A few months later when I tried to read the radio again, it would not > connect.? I checked the driver and it was still the 3.2.0.0 driver in my > listing.? It took me several days till I updated the driver to the latest > driver which of course did not work, but when I rolled it back again the > 3.2.0.0 driver from the pick list for this device, it began to work again. > Don't ask me what is going on but then set it back for auto updates.? I > will > now just roll the driver back every time I want to use this cable. > > I suggest you try to update your driver and then roll it back again to > 3.2.0.0 to see if that works for you.? I know it sounds stupid but it is > worth a try since it worked for me. > > > Herb, KB7UVC > NW APRS Group, West Sound Coordinator > Our WEB Site:? http://blog.nwaprs.info/ > > > > > > -----Original Message----- > From: chirp_users-bounces(a)intrepid.danplanet.com > [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of YT9TP - > Pedja > Sent: Friday, May 19, 2017 1:08 AM > To: chirp_users(a)intrepid.danplanet.com > Subject: [chirp_users] Cannot read Baofeng BF-888S > > I have strange issue with Windows 10, prolific serial adapter and BF-888S. > It reports unable to download from radio. > > Driver is proper (version 3.2.0.0, update is disabled), and Chirp works > fine > with the same adapter and other radio (Baofeng UV-B5) reading and writing. > > I tried four different BF-888S and neither can be read. > > However, when I use the same USB adapter on my old Windows XP computer, > Chirp easily reads and writes those BF-888S. > > Has anyone met with this problem? > > -- > > YT9TP, Pedja > http://www.yt9tp.iz.rs > > > > --- > This email has been checked for viruses by Avast antivirus software. > https://www.avast.com/antivirus > > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to amnon at amnon.zohar(a)gmail.com > To unsubscribe, send an email to chirp_users-unsubscribe@ > intrepid.danplanet.com > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/ec… ------------------------------ Message: 5 Date: Sat, 20 May 2017 11:13:04 -0500 From: "Glenn At Home" <GlennErvin(a)cableone.net> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: "Discussion of CHIRP" <chirp_users(a)intrepid.danplanet.com> Message-ID: <047601d2d183$f683cf00$0601a8c0@NUCPPYH> Content-Type: text/plain; charset="utf-8" I wonder if you did not reboot windows soon enough to solidify the change. You would think that this would not matter, but maybe Windows needs to reboot for changes such as the driver setting. Glenn I have been fighting similar problems on Win10 on my Baofeng UV-5R+.? I too rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase from HRO to work once I upgraded to Win10.? It worked fine on Win7 and never had a problem with the latest driver but would not work on Win10 till I rolled the driver back.? I then turned off the auto driver updates for this device.? Everything worked fine after rolling the driver back. A few months later when I tried to read the radio again, it would not connect.? I checked the driver and it was still the 3.2.0.0 driver in my listing.? It took me several days till I updated the driver to the latest driver which of course did not work, but when I rolled it back again the 3.2.0.0 driver from the pick list for this device, it began to work again. Don't ask me what is going on but then set it back for auto updates.? I will now just roll the driver back every time I want to use this cable. I suggest you try to update your driver and then roll it back again to 3.2.0.0 to see if that works for you.? I know it sounds stupid but it is worth a try since it worked for me. Herb, KB7UVC NW APRS Group, West Sound Coordinator Our WEB Site:? http://blog.nwaprs.info/ -----Original Message----- From: chirp_users-bounces(a)intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of YT9TP - Pedja Sent: Friday, May 19, 2017 1:08 AM To: chirp_users(a)intrepid.danplanet.com Subject: [chirp_users] Cannot read Baofeng BF-888S I have strange issue with Windows 10, prolific serial adapter and BF-888S. It reports unable to download from radio. Driver is proper (version 3.2.0.0, update is disabled), and Chirp works fine with the same adapter and other radio (Baofeng UV-B5) reading and writing. I tried four different BF-888S and neither can be read. However, when I use the same USB adapter on my old Windows XP computer, Chirp easily reads and writes those BF-888S. Has anyone met with this problem? -- YT9TP, Pedja http://www.yt9tp.iz.rs --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to amnon at amnon.zohar(a)gmail.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com -------------------------------------------------------------------------------- _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Glenn at glennervin(a)cableone.net To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/c0… ------------------------------ Message: 6 Date: Sat, 20 May 2017 10:59:00 -0700 From: Steve Sergeant <stevesgt(a)effable.com> Subject: [chirp_users] Leixen VV-898E on MacOS? (was: ??? ...daily-20170501??? repeatable crash) To: chirp_users(a)intrepid.danplanet.com Message-ID: <7623fd03-20f3-5351-6a42-7fc3f405c22a(a)effable.com> Content-Type: text/plain; charset=utf-8 Just to ping the group again: Has anybody out there had recent luck programming the Leixen VV-898E using a recent build of Chirp on MacOS? On 5/2/17 0:08 AM, Steve Sergeant wrote: > I just installed chirp-daily-20170501.app to try. I am attempting to > copy setups from one Leixen VV-898E radio into several others. > > However, a fraction of a second after the screen fills with the data > from the radio, Chirp unexpectedly quits, and I'm given the opportunity > to send a report to Apple. > > My system is: > > Macbook Air 11" (MacBookAir6,1) > MacOS X 10.11.6 (15G1421) > 4GB RAM > > The last line in .chirp/debug.log reads: > /Users/username/Applications/chirp-daily-20170501.app/Contents/MacOS/../Resources/chirp/chirpw:143: > PangoWarning: Invalid UTF-8 string passed to pango_layout_set_text() >? gtk.main() > > I'm using the osx-pl2303-installer.pkg for my serial driver. This is > currently the only radio for which I have a programming cable. ------------------------------ _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com End of chirp_users Digest, Vol 101, Issue 19 ******************************************** -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170521/7b… ------------------------------ Message: 12 Date: Sat, 20 May 2017 21:28:16 -0500 From: Carrie Jackson <mssjacksonifyournasty(a)gmail.com> Subject: Re: [chirp_users] chirp_users Digest, Vol 101, Issue 19 To: Bob Decker <k7bd(a)yahoo.com>, Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <93a354da-a162-4ad8-a2e4-25a707fed0f1@Spark> Content-Type: text/plain; charset="utf-8" Carrie Jackson liked your e-mail Spark by Readdle (https://itunes.apple.com/app/id997102246?mt=8&uo=4&at=10l6UJ&ct=Spark_QR_vi…) Spark by Readdle (https://itunes.apple.com/app/id997102246?mt=8&uo=4&at=10l6UJ&ct=Spark_QR_vi…) -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/1b… ------------------------------ Message: 13 Date: Sun, 21 May 2017 13:58:24 -0400 From: Joe Puma <theprogramllc(a)yahoo.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <762A954A-D894-4632-A374-F805FE65E9A1(a)yahoo.com> Content-Type: text/plain; charset="us-ascii" Rich do it yourself. Read bottom of email. Sent from my iPhone > On May 20, 2017, at 5:59 PM, Rich Baker <rbakedq(a)gmail.com> wrote: > > Unsubscribe me from this list NOW. > >> On Sat, May 20, 2017 at 3:36 PM, Jim Unroe <rock.unroe(a)gmail.com> wrote: >> On Sat, May 20, 2017 at 11:08 AM, Herb Gerhardt <hgerhardt(a)wavecable.com> wrote: >> > I have been fighting similar problems on Win10 on my Baofeng UV-5R+. I too >> > rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase >> > from HRO to work once I upgraded to Win10. It worked fine on Win7 and never >> > had a problem with the latest driver but would not work on Win10 till I >> > rolled the driver back. I then turned off the auto driver updates for this >> > device. Everything worked fine after rolling the driver back. >> > >> > A few months later when I tried to read the radio again, it would not >> > connect. I checked the driver and it was still the 3.2.0.0 driver in my >> > listing. It took me several days till I updated the driver to the latest >> > driver which of course did not work, but when I rolled it back again the >> > 3.2.0.0 driver from the pick list for this device, it began to work again. >> > Don't ask me what is going on but then set it back for auto updates. I will >> > now just roll the driver back every time I want to use this cable. >> > >> > I suggest you try to update your driver and then roll it back again to >> > 3.2.0.0 to see if that works for you. I know it sounds stupid but it is >> > worth a try since it worked for me. >> > >> > >> > Herb, KB7UVC >> > NW APRS Group, West Sound Coordinator >> > Our WEB Site: http://blog.nwaprs.info/ >> >> There is no need to disable updates. If Windows does update your >> Prolific driver, the previous driver is still installed. All you have >> to do is go into Device Manager and re-select the driver version that >> you want to use. I keep several Prolific driver versions installed and >> switch between then at will for testing purposes. >> >> Jim KC9HI >> >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Rich at rbakedq(a)gmail.com >> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com > > > > -- > S. Richard Baker > 250 Furnace Dock Road > Cortlandt Manor, NY 10567 > > Home: 914-736-1350 > Cell: 917-922-2463 > Email: rbakedq(a)gmail.com > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Joe Puma at theprogramllc(a)yahoo.com > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170521/ec… ------------------------------ Message: 14 Date: Sun, 21 May 2017 13:59:32 -0400 From: Joe Puma <theprogramllc(a)yahoo.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <9FDE6A55-5F80-439E-AFFE-51E5AF484F0D(a)yahoo.com> Content-Type: text/plain; charset="us-ascii" Lol Sent from my iPhone > On May 20, 2017, at 6:06 PM, Jim McCorison <jimmcc(a)mccorison.com> wrote: > > Wow! What a polite request. I just can't try and help you fast enough. > > Not. > > Jim McCorison > Orcas Island, WA > >> On May 20, 2017, at 2:59 PM, Rich Baker <rbakedq(a)gmail.com> wrote: >> >> Unsubscribe me from this list NOW. >> >>> On Sat, May 20, 2017 at 3:36 PM, Jim Unroe <rock.unroe(a)gmail.com> wrote: >>> On Sat, May 20, 2017 at 11:08 AM, Herb Gerhardt <hgerhardt(a)wavecable.com> wrote: >>> > I have been fighting similar problems on Win10 on my Baofeng UV-5R+. I too >>> > rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase >>> > from HRO to work once I upgraded to Win10. It worked fine on Win7 and never >>> > had a problem with the latest driver but would not work on Win10 till I >>> > rolled the driver back. I then turned off the auto driver updates for this >>> > device. Everything worked fine after rolling the driver back. >>> > >>> > A few months later when I tried to read the radio again, it would not >>> > connect. I checked the driver and it was still the 3.2.0.0 driver in my >>> > listing. It took me several days till I updated the driver to the latest >>> > driver which of course did not work, but when I rolled it back again the >>> > 3.2.0.0 driver from the pick list for this device, it began to work again. >>> > Don't ask me what is going on but then set it back for auto updates. I will >>> > now just roll the driver back every time I want to use this cable. >>> > >>> > I suggest you try to update your driver and then roll it back again to >>> > 3.2.0.0 to see if that works for you. I know it sounds stupid but it is >>> > worth a try since it worked for me. >>> > >>> > >>> > Herb, KB7UVC >>> > NW APRS Group, West Sound Coordinator >>> > Our WEB Site: http://blog.nwaprs.info/ >>> >>> There is no need to disable updates. If Windows does update your >>> Prolific driver, the previous driver is still installed. All you have >>> to do is go into Device Manager and re-select the driver version that >>> you want to use. I keep several Prolific driver versions installed and >>> switch between then at will for testing purposes. >>> >>> Jim KC9HI >>> >>> _______________________________________________ >>> chirp_users mailing list >>> chirp_users(a)intrepid.danplanet.com >>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>> This message was sent to Rich at rbakedq(a)gmail.com >>> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com >> >> >> >> -- >> S. Richard Baker >> 250 Furnace Dock Road >> Cortlandt Manor, NY 10567 >> >> Home: 914-736-1350 >> Cell: 917-922-2463 >> Email: rbakedq(a)gmail.com >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to K2SON at jimmcc(a)mccorison.com >> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Joe Puma at theprogramllc(a)yahoo.com > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170521/16… ------------------------------ _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com End of chirp_users Digest, Vol 101, Issue 20 ********************************************

4 3

Re: [chirp_users] chirp_users Digest, Vol 101, Issue 20
by Kc6iih＠aol.com 22 May '17

22 May '17

I use Windows 10 , no problems Jock In a message dated 5/22/2017 8:00:14 P.M. Pacific Daylight Time, GlennErvin(a)cableone.net writes: I had a brainstorm today... Windows 10, 64 bit version, allows for installing bash, in fact, it is a Microsoft version of Linux. You can install Linux programs too. I'd be willing to bet that Chirp in the CLI would work in that environment. And then Windows 10 folks could have a better experience. Glenn ----- Original Message ----- From: "roland kelts via chirp_users" <chirp_users(a)intrepid.danplanet.com> To: <chirp_users(a)intrepid.danplanet.com> Sent: Monday, May 22, 2017 9:20 PM Subject: Re: [chirp_users] chirp_users Digest, Vol 101, Issue 20 people seem to have all kinds of problems with windows 10 maybe the whole system for that o.s. needs to be rewritten i couldn't get chirp to work at all wouldn't even load . Solution i found and old abandoned computer (dell) with an earlier os and now everything works!!! -------------------------------------------- On Sun, 5/21/17, <chirp_users-request(a)intrepid.danplanet.com> wrote: Subject: chirp_users Digest, Vol 101, Issue 20 To: chirp_users(a)intrepid.danplanet.com Date: Sunday, May 21, 2017, 12:00 PM Send chirp_users mailing list submissions to chirp_users(a)intrepid.danplanet.com To subscribe or unsubscribe via the World Wide Web, visit http://intrepid.danplanet.com/mailman/listinfo/chirp_users or, via email, send a message with subject or body 'help' to chirp_users-request(a)intrepid.danplanet.com You can reach the person managing the list at chirp_users-owner(a)intrepid.danplanet.com When replying, please edit your Subject line so it is more specific than "Re: Contents of chirp_users digest..." Today's Topics: 1. Re: Cannot read Baofeng BF-888S (Jim Unroe) 2. Re: Leixen VV-898E on MacOS? (was: ...daily-20170501 repeatable crash) (Rich Baker) 3. Re: Cannot read Baofeng BF-888S (Rich Baker) 4. Re: Leixen VV-898E on MacOS? (was: ...daily-20170501 repeatable crash) (Jardy Dawson) 5. Re: Cannot read Baofeng BF-888S (Jardy Dawson) 6. Re: Cannot read Baofeng BF-888S (Jim McCorison) 7. Re: Leixen VV-898E on MacOS? (was: ...daily-20170501 repeatable crash) (Rich Baker) 8. Re: Cannot read Baofeng BF-888S (Rich Baker) 9. Re: Cannot read Baofeng BF-888S (Jim McCorison) 10. FT2D (NNN Wx) 11. Re: chirp_users Digest, Vol 101, Issue 19 (Bob Decker) 12. Re: chirp_users Digest, Vol 101, Issue 19 (Carrie Jackson) 13. Re: Cannot read Baofeng BF-888S (Joe Puma) 14. Re: Cannot read Baofeng BF-888S (Joe Puma) ---------------------------------------------------------------------- Message: 1 Date: Sat, 20 May 2017 15:36:37 -0400 From: Jim Unroe <rock.unroe(a)gmail.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <CADnO8U4_wsaCLet=nu=0a90pNzdt=DQc+i7v0b_A_xXK9CTowA(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" On Sat, May 20, 2017 at 11:08 AM, Herb Gerhardt <hgerhardt(a)wavecable.com> wrote: > I have been fighting similar problems on Win10 on my Baofeng UV-5R+. I too > rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase > from HRO to work once I upgraded to Win10. It worked fine on Win7 and never > had a problem with the latest driver but would not work on Win10 till I > rolled the driver back. I then turned off the auto driver updates for this > device. Everything worked fine after rolling the driver back. > > A few months later when I tried to read the radio again, it would not > connect. I checked the driver and it was still the 3.2.0.0 driver in my > listing. It took me several days till I updated the driver to the latest > driver which of course did not work, but when I rolled it back again the > 3.2.0.0 driver from the pick list for this device, it began to work again. > Don't ask me what is going on but then set it back for auto updates. I will > now just roll the driver back every time I want to use this cable. > > I suggest you try to update your driver and then roll it back again to > 3.2.0.0 to see if that works for you. I know it sounds stupid but it is > worth a try since it worked for me. > > > Herb, KB7UVC > NW APRS Group, West Sound Coordinator > Our WEB Site: http://blog.nwaprs.info/ There is no need to disable updates. If Windows does update your Prolific driver, the previous driver is still installed. All you have to do is go into Device Manager and re-select the driver version that you want to use. I keep several Prolific driver versions installed and switch between then at will for testing purposes. Jim KC9HI -------------- next part -------------- A non-text attachment was scrubbed... Name: ProlificDrivers2.jpg Type: image/jpeg Size: 161541 bytes Desc: not available Url : http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/40a b39a9/attachment-0001.jpg ------------------------------ Message: 2 Date: Sat, 20 May 2017 17:58:49 -0400 From: Rich Baker <rbakedq(a)gmail.com> Subject: Re: [chirp_users] Leixen VV-898E on MacOS? (was: ...daily-20170501 repeatable crash) To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <CAELWbPHggmTKrpxz-nTzfz-m2RxrEts0WSatBGaV3zZMA6V1ng(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" Unsubscribe me from this list NOW. On Sat, May 20, 2017 at 1:59 PM, Steve Sergeant <stevesgt(a)effable.com> wrote: > Just to ping the group again: > > Has anybody out there had recent luck programming the Leixen VV-898E > using a recent build of Chirp on MacOS? > > > > On 5/2/17 0:08 AM, Steve Sergeant wrote: > > I just installed chirp-daily-20170501.app to try. I am attempting to > > copy setups from one Leixen VV-898E radio into several others. > > > > However, a fraction of a second after the screen fills with the data > > from the radio, Chirp unexpectedly quits, and I'm given the opportunity > > to send a report to Apple. > > > > My system is: > > > > Macbook Air 11" (MacBookAir6,1) > > MacOS X 10.11.6 (15G1421) > > 4GB RAM > > > > The last line in .chirp/debug.log reads: > > /Users/username/Applications/chirp-daily-20170501.app/ > Contents/MacOS/../Resources/chirp/chirpw:143: > > PangoWarning: Invalid UTF-8 string passed to pango_layout_set_text() > > gtk.main() > > > > I'm using the osx-pl2303-installer.pkg for my serial driver. This is > > currently the only radio for which I have a programming cable. > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Rich at rbakedq(a)gmail.com > To unsubscribe, send an email to chirp_users-unsubscribe@ > intrepid.danplanet.com > -- S. Richard Baker 250 Furnace Dock Road Cortlandt Manor, NY 10567 Home: 914-736-1350 Cell: 917-922-2463 Email: rbakedq(a)gmail.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/00d 7f0f7/attachment-0001.html ------------------------------ Message: 3 Date: Sat, 20 May 2017 17:59:05 -0400 From: Rich Baker <rbakedq(a)gmail.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <CAELWbPEYTesu5jWmSHgqmF70N6MrjqCZfYx0GmpYybU4fz4iQQ(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" Unsubscribe me from this list NOW. On Sat, May 20, 2017 at 3:36 PM, Jim Unroe <rock.unroe(a)gmail.com> wrote: > On Sat, May 20, 2017 at 11:08 AM, Herb Gerhardt <hgerhardt(a)wavecable.com> > wrote: > > I have been fighting similar problems on Win10 on my Baofeng UV-5R+. I > too > > rolled back the driver to 3.2.0.0 to get my "genuine" cable that I > purchase > > from HRO to work once I upgraded to Win10. It worked fine on Win7 and > never > > had a problem with the latest driver but would not work on Win10 till I > > rolled the driver back. I then turned off the auto driver updates for > this > > device. Everything worked fine after rolling the driver back. > > > > A few months later when I tried to read the radio again, it would not > > connect. I checked the driver and it was still the 3.2.0.0 driver in my > > listing. It took me several days till I updated the driver to the latest > > driver which of course did not work, but when I rolled it back again the > > 3.2.0.0 driver from the pick list for this device, it began to work > again. > > Don't ask me what is going on but then set it back for auto updates. I > will > > now just roll the driver back every time I want to use this cable. > > > > I suggest you try to update your driver and then roll it back again to > > 3.2.0.0 to see if that works for you. I know it sounds stupid but it is > > worth a try since it worked for me. > > > > > > Herb, KB7UVC > > NW APRS Group, West Sound Coordinator > > Our WEB Site: http://blog.nwaprs.info/ > > There is no need to disable updates. If Windows does update your > Prolific driver, the previous driver is still installed. All you have > to do is go into Device Manager and re-select the driver version that > you want to use. I keep several Prolific driver versions installed and > switch between then at will for testing purposes. > > Jim KC9HI > > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Rich at rbakedq(a)gmail.com > To unsubscribe, send an email to chirp_users-unsubscribe@ > intrepid.danplanet.com > -- S. Richard Baker 250 Furnace Dock Road Cortlandt Manor, NY 10567 Home: 914-736-1350 Cell: 917-922-2463 Email: rbakedq(a)gmail.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/3ef 22303/attachment-0001.html ------------------------------ Message: 4 Date: Sat, 20 May 2017 15:06:24 -0700 From: Jardy Dawson <jardy72(a)yahoo.com> Subject: Re: [chirp_users] Leixen VV-898E on MacOS? (was: ...daily-20170501 repeatable crash) To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <E64697DE-5BA1-4595-AC56-99B0663E9B06(a)yahoo.com> Content-Type: text/plain; charset="us-ascii" You have to do that yourself by READING THE LINKS AT THE BOTTOM OF EACH EMAIL. Jardy Dawson WA7JRD Ham Radio Message relayed from secret Hillary Clinton server, located in the basement of her house. OOPS, you aren't supposed to know that! On May 20, 2017, at 14:58, Rich Baker <rbakedq(a)gmail.com> wrote: Unsubscribe me from this list NOW. > On Sat, May 20, 2017 at 1:59 PM, Steve Sergeant <stevesgt(a)effable.com> wrote: > Just to ping the group again: > > Has anybody out there had recent luck programming the Leixen VV-898E > using a recent build of Chirp on MacOS? > > > > On 5/2/17 0:08 AM, Steve Sergeant wrote: > > I just installed chirp-daily-20170501.app to try. I am attempting to > > copy setups from one Leixen VV-898E radio into several others. > > > > However, a fraction of a second after the screen fills with the data > > from the radio, Chirp unexpectedly quits, and I'm given the opportunity > > to send a report to Apple. > > > > My system is: > > > > Macbook Air 11" (MacBookAir6,1) > > MacOS X 10.11.6 (15G1421) > > 4GB RAM > > > > The last line in .chirp/debug.log reads: > > /Users/username/Applications/chirp-daily-20170501.app/Contents/MacOS/../Reso urces/chirp/chirpw:143: > > PangoWarning: Invalid UTF-8 string passed to pango_layout_set_text() > > gtk.main() > > > > I'm using the osx-pl2303-installer.pkg for my serial driver. This is > > currently the only radio for which I have a programming cable. > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Rich at rbakedq(a)gmail.com > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com -- S. Richard Baker 250 Furnace Dock Road Cortlandt Manor, NY 10567 Home: 914-736-1350 Cell: 917-922-2463 Email: rbakedq(a)gmail.com _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72@yahoo .com To unsubscribe, send an email tochirp_users-unsubscribe(a)intrepid.danplanet.com -------------- next part -------------- An HTML attachment was scrubbed... URL:http://intrepid.danplanet.com/pipermail/chirp_users/attachments/2017052… ------------------------------ Message: 5 Date: Sat, 20 May 2017 15:07:04 -0700 From: Jardy Dawson <jardy72(a)yahoo.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <DA466B25-CD12-4633-B731-5B3B12630FC0(a)yahoo.com> Content-Type: text/plain; charset="us-ascii" Unsub yourself. Jardy Dawson WA7JRD Ham Radio Message relayed from secret Hillary Clinton server, located in the basement of her house. OOPS, you aren't supposed to know that! On May 20, 2017, at 14:59, Rich Baker <rbakedq(a)gmail.com> wrote: Unsubscribe me from this list NOW. > On Sat, May 20, 2017 at 3:36 PM, Jim Unroe <rock.unroe(a)gmail.com> wrote: > On Sat, May 20, 2017 at 11:08 AM, Herb Gerhardt <hgerhardt(a)wavecable.com> wrote: > > I have been fighting similar problems on Win10 on my Baofeng UV-5R+. I too > > rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase > > from HRO to work once I upgraded to Win10. It worked fine on Win7 and never > > had a problem with the latest driver but would not work on Win10 till I > > rolled the driver back. I then turned off the auto driver updates for this > > device. Everything worked fine after rolling the driver back. > > > > A few months later when I tried to read the radio again, it would not > > connect. I checked the driver and it was still the 3.2.0.0 driver in my > > listing. It took me several days till I updated the driver to the latest > > driver which of course did not work, but when I rolled it back again the > > 3.2.0.0 driver from the pick list for this device, it began to work again. > > Don't ask me what is going on but then set it back for auto updates. I will > > now ju st roll the driver back every time I want to use this cable. > > > > I suggest you try to update your driver and then roll it back again to > > 3.2.0.0 to see if that works for you. I know it sounds stupid but it is > > worth a try since it worked for me. > > > > > > Herb, KB7UVC > > NW APRS Group, West Sound Coordinator > > Our WEB Site: http://blog.nwaprs.info/ > > There is no need to disable updates. If Windows does update your > Prolific driver, the previous driver is still installed. All you have > to do is go into Device Manager and re-select the driver version that > you want to use. I keep several Prolific driver versions installed and > switch between then at will for testing purposes. > > Jim KC9HI > > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Rich at rbakedq(a)gmail.com > To unsubscribe, send an email to chirp_ users-unsubscribe(a)intrepid.danplanet.com -- S. Richard Baker 250 Furnace Dock Road Cortlandt Manor, NY 10567 Home: 914-736-1350 Cell: 917-922-2463 Email: rbakedq(a)gmail.com _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72(a)yahoo.com To unsubscribe, send an email tochirp_users-unsubscribe(a)intrepid.danplanet.com -------------- next part -------------- An HTML attachment was scrubbed... URL:http://intrepid.danplanet.com/pipermail/chirp_users/attachments/2017052… ------------------------------ Message: 6 Date: Sat, 20 May 2017 15:06:24 -0700 From: Jim McCorison <jimmcc(a)mccorison.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <3E9DA26F-DC85-4AA2-9A7E-AF109E11437C(a)mccorison.com> Content-Type: text/plain; charset ="us-ascii" Wow! What a polite request. I just can't try and help you fast enough. Not. Jim McCorison Orcas Island, WA > On May 20, 2017, at 2:59 PM, Rich Baker <rbakedq(a)gmail.com> wrote: > > Unsubscribe me from this list NOW. > >> On Sat, May 20, 2017 at 3:36 PM, Jim Unroe <rock.unroe(a)gmail.com> wrote: >> On Sat, May 20, 2017 at 11:08 AM, Herb Gerhardt <hgerhardt(a)wavecable.com> wrote: >> > I have been fighting similar problems on Win10 on my Baofeng UV-5R+. I too >> > rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase >> > from HRO to work once I upgraded to Win10. It worked fine on Win7 and never >> > had a problem with the latest driver but would not work on Win10 till I >> > rolled the driver back. I then turned off the auto driver updates for this >> > device. Everything worked fine after rolling the driver back. >> > >> > A few months later when I tried to read the radio again, it would not >> > connect. I checked the driver and it was still th e 3.2.0.0 driver in my >> > listing. It took me several days till I updated the driver to the latest >> > driver which of course did not work, but when I rolled it back again the >> > 3.2.0.0 driver from the pick list for this device, it began to work again. >> > Don't ask me what is going on but then set it back for auto updates. I will >> > now just roll the driver back every time I want to use this cable. >> > >> > I suggest you try to update your driver and then roll it back again to >> > 3.2.0.0 to see if that works for you. I know it sounds stupid but it is >> > worth a try since it worked for me. >> > >> > >> > Herb, KB7UVC >> > NW APRS Group, West Sound Coordinator >> > Our WEB Site: http://blog.nwaprs.info/ >> >> There is no need to disable updates. If Windows does update your >> Prolific driver, the previous driver is still installed. All you have >> to do is go into Device Manager and re-select the driver version that >> you want to use. I keep several Prolific dr iver versions installed and >> switch between then at will for testing purposes. >> >> Jim KC9HI >> >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Rich at rbakedq(a)gmail.com >> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com > > > > -- > S. Richard Baker > 250 Furnace Dock Road > Cortlandt Manor, NY 10567 > > Home: 914-736-1350 > Cell: 917-922-2463 > Email: rbakedq(a)gmail.com > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to K2SON at jimmcc(a)mccorison.com > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com -------------- next part -------------- An HTML attachment was scrubbed... URL:http://intrepid.danplanet.c om/pipermail/chirp_users/attachments/20170520/4f76cc98/attachment-0001.html ------------------------------ Message: 7 Date: Sat, 20 May 2017 19:29:42 -0400 From: Rich Baker <rbakedq(a)gmail.com> Subject: Re: [chirp_users] Leixen VV-898E on MacOS? (was: ...daily-20170501 repeatable crash) To: Jardy Dawson <jardy72(a)yahoo.com>, Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <CAELWbPGOpWuJE5WYt0n8CN9u8q9+PzH5swHspN+D6J=zBNbSFg(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" I have done that over 10 times now. It does not work. On Sat, May 20, 2017 at 6:06 PM, Jardy Dawson via chirp_users < chirp_users(a)intrepid.danplanet.com> wrote: > You have to do that yourself by READING THE LINKS AT THE BOTTOM OF EACH > EMAIL. > > Jardy Dawson > WA7JRD Ham Radio > > Message relayed from secret Hillary Clinton server, located in the > basement of her house. OOPS, you aren't supposed to know that! > > On May 20, 2017, at 14:58, Rich Baker <rbakedq(a)gmail.com> wro te: > > Unsubscribe me from this list NOW. > > On Sat, May 20, 2017 at 1:59 PM, Steve Sergeant <stevesgt(a)effable.com> > wrote: > >> Just to ping the group again: >> >> Has anybody out there had recent luck programming the Leixen VV-898E >> using a recent build of Chirp on MacOS? >> >> >> >> On 5/2/17 0:08 AM, Steve Sergeant wrote: >> > I just installed chirp-daily-20170501.app to try. I am attempting to >> > copy setups from one Leixen VV-898E radio into several others. >> > >> > However, a fraction of a second after the screen fills with the data >> > from the radio, Chirp unexpectedly quits, and I'm given the opportunity >> > to send a report to Apple. >> > >> > My system is: >> > >> > Macbook Air 11" (MacBookAir6,1) >> > MacOS X 10.11.6 (15G1421) >> > 4GB RAM >> > >> > The last line in .chirp/debug.log reads: >> > /Users/username/Applications/chirp-daily-20170501.app/Conten >> ts/MacOS/../Resources/chirp/chirpw:143: >> > PangoWarning: Invalid UTF-8 string passed to pango_ layout_set_text() >> > gtk.main() >> > >> > I'm using the osx-pl2303-installer.pkg for my serial driver. This is >> > currently the only radio for which I have a programming cable. >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Rich at rbakedq(a)gmail.com >> To unsubscribe, send an email to chirp_users-unsubscribe@intrep >> id.danplanet.com >> > > > > -- > S. Richard Baker > 250 Furnace Dock Road > Cortlandt Manor, NY 10567 > > Home: 914-736-1350 <(914)%20736-1350> > Cell: 917-922-2463 <(917)%20922-2463> > Email: rbakedq(a)gmail.com > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Jardy at jardy72(a)yahoo.com > To unsubscribe, send an email to chirp_users-unsubscribe@ > i ntrepid.danplanet.com > > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Rich at rbakedq(a)gmail.com > To unsubscribe, send an email to chirp_users-unsubscribe@ > intrepid.danplanet.com > -- S. Richard Baker 250 Furnace Dock Road Cortlandt Manor, NY 10567 Home: 914-736-1350 Cell: 917-922-2463 Email: rbakedq(a)gmail.com -------------- next part -------------- An HTML attachment was scrubbed... URL:http://intrepid.danplanet.com/pipermail/chirp_users/attachments/2017052… ------------------------------ Message: 8 Date: Sat, 20 May 2017 19:30:55 -0400 From: Rich Baker <rbakedq(a)gmail.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <CAELWbPGYBw51s9AL8BoZuUighp_aUj05Dfj_vL9ZWKyqidhp=Q(a)mail.gmail.com> Content-Type: text/plai n; charset="utf-8" Tried to unsubscribe over 10 times both on the website and by sending emails. On Sat, May 20, 2017 at 6:06 PM, Jim McCorison <jimmcc(a)mccorison.com> wrote: > Wow! What a polite request. I just can't try and help you fast enough. > > Not. > > Jim McCorison > Orcas Island, WA > > On May 20, 2017, at 2:59 PM, Rich Baker <rbakedq(a)gmail.com> wrote: > > Unsubscribe me from this list NOW. > > On Sat, May 20, 2017 at 3:36 PM, Jim Unroe <rock.unroe(a)gmail.com> wrote: > >> On Sat, May 20, 2017 at 11:08 AM, Herb Gerhardt <hgerhardt(a)wavecable.com> >> wrote: >> > I have been fighting similar problems on Win10 on my Baofeng UV-5R+. I >> too >> > rolled back the driver to 3.2.0.0 to get my "genuine" cable that I >> purchase >> > from HRO to work once I upgraded to Win10. It worked fine on Win7 and >> never >> > had a problem with the latest driver but would not work on Win10 till I >> > rolled the driver back. I then turned off the auto driver updates for >> this >> > devi ce. Everything worked fine after rolling the driver back. >> > >> > A few months later when I tried to read the radio again, it would not >> > connect. I checked the driver and it was still the 3.2.0.0 driver in my >> > listing. It took me several days till I updated the driver to the >> latest >> > driver which of course did not work, but when I rolled it back again the >> > 3.2.0.0 driver from the pick list for this device, it began to work >> again. >> > Don't ask me what is going on but then set it back for auto updates. I >> will >> > now just roll the driver back every time I want to use this cable. >> > >> > I suggest you try to update your driver and then roll it back again to >> > 3.2.0.0 to see if that works for you. I know it sounds stupid but it is >> > worth a try since it worked for me. >> > >> > >> > Herb, KB7UVC >> > NW APRS Group, West Sound Coordinator >> > Our WEB Site: http://blog.nwaprs.info/ >> >> There is no need to disable updates. If Windows does upd ate your >> Prolific driver, the previous driver is still installed. All you have >> to do is go into Device Manager and re-select the driver version that >> you want to use. I keep several Prolific driver versions installed and >> switch between then at will for testing purposes. >> >> Jim KC9HI >> >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Rich at rbakedq(a)gmail.com >> To unsubscribe, send an email to chirp_users-unsubscribe@intrep >> id.danplanet.com >> > > > > -- > S. Richard Baker > 250 Furnace Dock Road > Cortlandt Manor, NY 10567 > > Home: 914-736-1350 <(914)%20736-1350> > Cell: 917-922-2463 <(917)%20922-2463> > Email: rbakedq(a)gmail.com > > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_use rs > This message was sent to K2SON at jimmcc(a)mccorison.com > To unsubscribe, send an email to chirp_users-unsubscribe@ > intrepid.danplanet.com > > > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Rich at rbakedq(a)gmail.com > To unsubscribe, send an email to chirp_users-unsubscribe@ > intrepid.danplanet.com > -- S. Richard Baker 250 Furnace Dock Road Cortlandt Manor, NY 10567 Home: 914-736-1350 Cell: 917-922-2463 Email: rbakedq(a)gmail.com -------------- next part -------------- An HTML attachment was scrubbed... URL:http://intrepid.danplanet.com/pipermail/chirp_users/attachments/2017052… cc1511/attachment-0001.html ------------------------------ Message: 9 Date: Sat, 20 May 2017 18:03:34 -0700 From: Jim McCorison <jimmcc(a)mccorison.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP <chirp_use rs(a)intrepid.danplanet.com> Message-ID: <20885233-494D-4BE4-B06E-CDBE22B4C2BF(a)mccorison.com> Content-Type: text/plain; charset="utf-8" Perhaps it you reached out with a polite request along the lines of ?I?m having problems unsubscribing from this list. I?ve sent an unsubscribe request email without success and I?ve tried the website without success. Does any body have any ideas what I?m doing wrong?? Bonus points for sending it as a separate thread with s subject of something like ?Need help. Problems unsubscribing." Such an inquiry will probably get you a lot more assistance than just throwing a grenade into the mailing list. --- Jim McCorison Orcas Island, WA > On May 20, 2017, at 4:30 PM, Rich Baker <rbakedq(a)gmail.com> wrote: > > Tried to unsubscribe over 10 times both on the website and by sending emails. > > On Sat, May 20, 2017 at 6:06 PM, Jim McCorison <jimmcc(a)mccorison.com <mailto:jimmcc@mccorison.com>> wrote: > Wow! What a polite request. I just can't try and help y ou fast enough. > > Not. > > Jim McCorison > Orcas Island, WA > > On May 20, 2017, at 2:59 PM, Rich Baker <rbakedq(a)gmail.com <mailto:rbakedq@gmail.com>> wrote: > >> Unsubscribe me from this list NOW. >> >> On Sat, May 20, 2017 at 3:36 PM, Jim Unroe <rock.unroe(a)gmail.com <mailto:rock.unroe@gmail.com>> wrote: >> On Sat, May 20, 2017 at 11:08 AM, Herb Gerhardt <hgerhardt(a)wavecable.com <mailto:hgerhardt@wavecable.com>> wrote: >> > I have been fighting similar problems on Win10 on my Baofeng UV-5R+. I too >> > rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase >> > from HRO to work once I upgraded to Win10. It worked fine on Win7 and never >> > had a problem with the latest driver but would not work on Win10 till I >> > rolled the driver back. I then turned off the auto driver updates for this >> > device. Everything worked fine after rolling the driver back. >> > >> > A few months later when I tried to read the radio again, it would not >> > connect. I c hecked the driver and it was still the 3.2.0.0 driver in my >> > listing. It took me several days till I updated the driver to the latest >> > driver which of course did not work, but when I rolled it back again the >> > 3.2.0.0 driver from the pick list for this device, it began to work again. >> > Don't ask me what is going on but then set it back for auto updates. I will >> > now just roll the driver back every time I want to use this cable. >> > >> > I suggest you try to update your driver and then roll it back again to >> > 3.2.0.0 to see if that works for you. I know it sounds stupid but it is >> > worth a try since it worked for me. >> > >> > >> > Herb, KB7UVC >> > NW APRS Group, West Sound Coordinator >> > Our WEB Site: http://blog.nwaprs.info/ <http://blog.nwaprs.info/> >> >> There is no need to disable updates. If Windows does update your >> Prolific driver, the previous driver is still installed. All you have >> to do is go into Device Manager and re-select the dr iver version that >> you want to use. I keep several Prolific driver versions installed and >> switch between then at will for testing purposes. >> >> Jim KC9HI >> >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users <http://intrepid.danplanet.com/mailman/listinfo/chirp_users> >> This message was sent to Rich at rbakedq(a)gmail.com <mailto:rbakedq@gmail.com> >> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com> >> >> >> >> -- >> S. Richard Baker >> 250 Furnace Dock Road >> Cortlandt Manor, NY 10567 >> >> Home: 914-736-1350 <tel:(914)%20736-1350> >> Cell: 917-922-2463 <tel:(917)%20922-2463> >> Email: rbakedq(a)gmail.com <mailto:rbakedq@gmail.com>_______________________________________________ >> chirp_users mailing list >> chirp_ users(a)intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users <http://intrepid.danplanet.com/mailman/listinfo/chirp_users> >> This message was sent to K2SON at jimmcc(a)mccorison.com <mailto:jimmcc@mccorison.com> >> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com> > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users <http://intrepid.danplanet.com/mailman/listinfo/chirp_users> > This message was sent to Rich at rbakedq(a)gmail.com <mailto:rbakedq@gmail.com> > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com> > > > > -- > S. Richard Baker > 250 Furnace Dock Road > Cortlandt Ma nor, NY 10567 > > Home: 914-736-1350 > Cell: 917-922-2463 > Email: rbakedq(a)gmail.com <mailto:rbakedq@gmail.com>_______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users <http://intrepid.danplanet.com/mailman/listinfo/chirp_users> > This message was sent to K2SON at jimmcc(a)mccorison.com <mailto:jimmcc@mccorison.com> > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com> -------------- next part -------------- An HTML attachment was scrubbed... URL:http://intrepid.danplanet.com/pipermail/chirp_users/attachments/2017052… ------------------------------ Message: 10 Date: Sat, 20 May 2017 19:40:49 -0600 From: NNN Wx <nthreewx(a)gmail.com> Subject: [chirp_users] FT2D To: chirp_users(a)intrepid.danplanet.com Message-ID: <EB99DD23-C6B9-482B-AC28-220025DC2B3B(a)gmail.com> Content-Type: text/plain; charset=utf-8 I see ?bug? numbers 3325 and 3257 from last year, hoping support for Yaesu FT2D radio will work. It?s in the wish list, and doesn?t seem to need hardware for testing. I?m interested in getting chirp to work, and for some insights into how to get the serial connection to work on Macintosh OS X 10.12.5. HOW CAN I HELP (assuming this just needs effort)?? ------------------------------ Message: 11 Date: Sun, 21 May 2017 02:25:30 +0000 (UTC) From: Bob Decker <k7bd(a)yahoo.com> Subject: Re: [chirp_users] chirp_users Digest, Vol 101, Issue 19 To: "chirp_users(a)intrepid.danplanet.com" <chirp_users(a)intrepid.danplanet.com> Message-ID: <1930811399.2660365.1495333530472(a)mail.yahoo.com> Content-Type: text/plain; charset="utf-8" Your method of removal from list did not work. I must cut back mailwh9ch I do not use.? Remove my address. The only other way to remove youre-mail by listing it as spam.ThanksB ob On Saturday, May 20, 2017 12:00 PM, "chirp_users-request(a)intrepid.danplanet.com" <chirp_users-request(a)intrepid.danplanet.com> wrote: Send chirp_users mailing list submissions to ??? chirp_users(a)intrepid.danplanet.com To subscribe or unsubscribe via the World Wide Web, visit ??? http://intrepid.danplanet.com/mailman/listinfo/chirp_users or, via email, send a message with subject or body 'help' to ??? chirp_users-request(a)intrepid.danplanet.com You can reach the person managing the list at ??? chirp_users-owner(a)intrepid.danplanet.com When replying, please edit your Subject line so it is more specific than "Re: Contents of chirp_users digest..." Today's Topics: ? 1. RepeaterBook Proximety Not Accurate? (John Kobeck) ? 2. Re: RepeaterBook Proximety Not Accurate? (Jim Unroe) ? 3. Re: Cannot read Baofeng BF-888S (Herb Gerhardt) ? 4. Re: Cannot read Baofeng BF-888S (Amnon Zohar) ? 5. Re: Cannot read Baofeng BF-888S (Glenn At Home) ? 6. Leixen VV-898E on MacOS? (was: ...daily-20 170501??? repeatable ? ? ? crash) (Steve Sergeant) ---------------------------------------------------------------------- Message: 1 Date: Fri, 19 May 2017 23:04:47 -0400 From: John Kobeck <johnkobeck(a)me.com> Subject: [chirp_users] RepeaterBook Proximety Not Accurate? To: chirp_users(a)intrepid.danplanet.com Message-ID: <5F40902E-156A-415A-B687-A0118642A496(a)me.com> Content-Type: text/plain; charset=utf-8 Hello Chirpers; I have a question. I am trying to program repeaters into a Kenwood TMV7. I have been using RepeaterBooks Proximity search. When setting a Manhattan? zip code for example, it doesn?t seem to matter if I indicate a 100 mile radius or a 300 mile radius. It only seems pull about a 15 miles radius. Is there a default that won?t allow a larger range? 73s KC2MPG ------------------------------ Message: 2 Date: Sat, 20 May 2017 05:48:35 -0400 From: Jim Unroe <rock.unroe(a)gmail.com> Subject: Re: [chirp_users] RepeaterBook Proximety Not Accurate? To: Discussion of CHIRP <c hirp_users(a)intrepid.danplanet.com> Message-ID: ??? <CADnO8U7LPAPZM6s2Y6mtYQd1qz+t+QNJR9xDXG_AAX2kbBvqug(a)mail.gmail.com> Content-Type: text/plain; charset="UTF-8" On Fri, May 19, 2017 at 11:04 PM, John Kobeck <johnkobeck(a)me.com> wrote: > > Hello Chirpers; > > I have a question. I am trying to program repeaters into a Kenwood TMV7. I have been using RepeaterBooks Proximity search. When setting a Manhattan? zip code for example, it doesn?t seem to matter if I indicate a 100 mile radius or a 300 mile radius. It only seems pull about a 15 miles radius. Is there a default that won?t allow a larger range? > > 73s > KC2MPG Using "Import from data source", "Location" = 10001 and "Band" = "2 meters (144MHz)", I the following numbers of repeaters are retrieved. Distance: # of repeaters 15: 50 100: 367 300: 1387 Jim KC9HI ------------------------------ Message: 3 Date: Sat, 20 May 2017 08:08:14 -0700 From: "Herb Gerhardt" <hgerhardt(a)wavecable.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: "'Discussion of CHIRP'" <chirp_users(a)intrepid.danplanet.com> Message-ID: <001301d2d17a$e7936ea0$b6ba4be0$@com> Content-Type: text/plain;??? charset="us-ascii" I have been fighting similar problems on Win10 on my Baofeng UV-5R+.? I too rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase from HRO to work once I upgraded to Win10.? It worked fine on Win7 and never had a problem with the latest driver but would not work on Win10 till I rolled the driver back.? I then turned off the auto driver updates for this device.? Everything worked fine after rolling the driver back. A few months later when I tried to read the radio again, it would not connect.? I checked the driver and it was still the 3.2.0.0 driver in my listing.? It took me several days till I updated the driver to the latest driver which of course did not work, but when I rolled it back again the 3.2.0.0 driver from the pick list for this device, it began to work again. Don't ask me what is going on but then set it back for auto updates.? I will now just roll the driver back every time I want to use this cable. I suggest you try to update your driver and then roll it back again to 3.2.0.0 to see if that works for you.? I know it sounds stupid but it is worth a try since it worked for me. Herb, KB7UVC NW APRS Group, West Sound Coordinator Our WEB Site:? http://blog.nwaprs.info/ -----Original Message----- From: chirp_users-bounces(a)intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of YT9TP - Pedja Sent: Friday, May 19, 2017 1:08 AM To: chirp_users(a)intrepid.danplanet.com Subject: [chirp_users] Cannot read Baofeng BF-888S I have strange issue with Windows 10, prolific serial adapter and BF-888S. It reports unable to download from radio. Driver is proper (version 3.2.0.0, update is disabled), and Chirp works fine with the same adapter and other radio (Baofeng UV-B5) reading and writing. I tried four different BF-888S and neither can be read. However, when I use the same USB adapter on my old Windows XP computer, Chirp easily reads and writes those BF-888S. Has anyone met with this problem? -- YT9TP, Pedja http://www.yt9tp.iz.rs --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus ------------------------------ Message: 4 Date: Sat, 20 May 2017 18:23:30 +0300 From: Amnon Zohar <amnon.zohar(a)gmail.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: ??? <CAN5HzcQAXwM2rBUjdtwkMCOb7_XfsmQ6PgMSqsc5M4B0i19F-A(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" I guess some update of win10 change some part of the driver without changing the driver version number. Redowngrading probably fix this. But this just a wild guess. The solution is important. The reason is less important ?????? 20 ???? 2017 18:09,? "Herb Gerhardt" <hgerhardt(a)wavecable.com> ???: > I hav e been fighting similar problems on Win10 on my Baofeng UV-5R+.? I too > rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase > from HRO to work once I upgraded to Win10.? It worked fine on Win7 and > never > had a problem with the latest driver but would not work on Win10 till I > rolled the driver back.? I then turned off the auto driver updates for this > device.? Everything worked fine after rolling the driver back. > > A few months later when I tried to read the radio again, it would not > connect.? I checked the driver and it was still the 3.2.0.0 driver in my > listing.? It took me several days till I updated the driver to the latest > driver which of course did not work, but when I rolled it back again the > 3.2.0.0 driver from the pick list for this device, it began to work again. > Don't ask me what is going on but then set it back for auto updates.? I > will > now just roll the driver back every time I want to use this cable. > > I suggest y ou try to update your driver and then roll it back again to > 3.2.0.0 to see if that works for you.? I know it sounds stupid but it is > worth a try since it worked for me. > > > Herb, KB7UVC > NW APRS Group, West Sound Coordinator > Our WEB Site:? http://blog.nwaprs.info/ > > > > > > -----Original Message----- > From: chirp_users-bounces(a)intrepid.danplanet.com > [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of YT9TP - > Pedja > Sent: Friday, May 19, 2017 1:08 AM > To: chirp_users(a)intrepid.danplanet.com > Subject: [chirp_users] Cannot read Baofeng BF-888S > > I have strange issue with Windows 10, prolific serial adapter and BF-888S. > It reports unable to download from radio. > > Driver is proper (version 3.2.0.0, update is disabled), and Chirp works > fine > with the same adapter and other radio (Baofeng UV-B5) reading and writing. > > I tried four different BF-888S and neither can be read. > > However, when I use the same USB adapter on my old Windows XP co mputer, > Chirp easily reads and writes those BF-888S. > > Has anyone met with this problem? > > -- > > YT9TP, Pedja > http://www.yt9tp.iz.rs > > > > --- > This email has been checked for viruses by Avast antivirus software. > https://www.avast.com/antivirus > > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to amnon at amnon.zohar(a)gmail.com > To unsubscribe, send an email to chirp_users-unsubscribe@ > intrepid.danplanet.com > -------------- next part -------------- An HTML attachment was scrubbed... URL:http://intrepid.danplanet.com/pipermail/chirp_users/attachments/2017052… ent-0001.html ------------------------------ Message: 5 Date: Sat, 20 May 2017 11:13:04 -0500 From: "Glenn At Home" <GlennErvin(a)cableone.net> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: "Discussion of CHIRP" <chirp_users@intr epid.danplanet.com> Message-ID: <047601d2d183$f683cf00$0601a8c0@NUCPPYH> Content-Type: text/plain; charset="utf-8" I wonder if you did not reboot windows soon enough to solidify the change. You would think that this would not matter, but maybe Windows needs to reboot for changes such as the driver setting. Glenn I have been fighting similar problems on Win10 on my Baofeng UV-5R+.? I too rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase from HRO to work once I upgraded to Win10.? It worked fine on Win7 and never had a problem with the latest driver but would not work on Win10 till I rolled the driver back.? I then turned off the auto driver updates for this device.? Everything worked fine after rolling the driver back. A few months later when I tried to read the radio again, it would not connect.? I checked the driver and it was still the 3.2.0.0 driver in my listing.? It took me several days till I updated the driver to the latest driver which of co urse did not work, but when I rolled it back again the 3.2.0.0 driver from the pick list for this device, it began to work again. Don't ask me what is going on but then set it back for auto updates.? I will now just roll the driver back every time I want to use this cable. I suggest you try to update your driver and then roll it back again to 3.2.0.0 to see if that works for you.? I know it sounds stupid but it is worth a try since it worked for me. Herb, KB7UVC NW APRS Group, West Sound Coordinator Our WEB Site:? http://blog.nwaprs.info/ -----Original Message----- From: chirp_users-bounces(a)intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of YT9TP - Pedja Sent: Friday, May 19, 2017 1:08 AM To: chirp_users(a)intrepid.danplanet.com Subject: [chirp_users] Cannot read Baofeng BF-888S I have strange issue with Windows 10, prolific serial adapter and BF-888S. It reports unable to download from radio. Driver is proper (version 3.2.0.0, update is di sabled), and Chirp works fine with the same adapter and other radio (Baofeng UV-B5) reading and writing. I tried four different BF-888S and neither can be read. However, when I use the same USB adapter on my old Windows XP computer, Chirp easily reads and writes those BF-888S. Has anyone met with this problem? -- YT9TP, Pedja http://www.yt9tp.iz.rs --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to amnon at amnon.zohar(a)gmail.com To unsubscribe, send an email tochirp_users-unsubscribe(a)intrepid.danplanet.com -------------------------------------------------------------------------------- _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/list info/chirp_users This message was sent to Glenn at glennervin(a)cableone.net To unsubscribe, send an email tochirp_users-unsubscribe(a)intrepid.danplanet.com -------------- next part -------------- An HTML attachment was scrubbed... URL:http://intrepid.danplanet.com/pipermail/chirp_users/attachments/2017052… ------------------------------ Message: 6 Date: Sat, 20 May 2017 10:59:00 -0700 From: Steve Sergeant <stevesgt(a)effable.com> Subject: [chirp_users] Leixen VV-898E on MacOS? (was: ??? ...daily-20170501??? repeatable crash) To: chirp_users(a)intrepid.danplanet.com Message-ID: <7623fd03-20f3-5351-6a42-7fc3f405c22a(a)effable.com> Content-Type: text/plain; charset=utf-8 Just to ping the group again: Has anybody out there had recent luck programming the Leixen VV-898E using a recent build of Chirp on MacOS? On 5/2/17 0:08 AM, Steve Sergeant wrote: > I just installed chirp-daily-20170501.app to try. I am attempting to > copy setups from one Leixen VV-898E r adio into several others. > > However, a fraction of a second after the screen fills with the data > from the radio, Chirp unexpectedly quits, and I'm given the opportunity > to send a report to Apple. > > My system is: > > Macbook Air 11" (MacBookAir6,1) > MacOS X 10.11.6 (15G1421) > 4GB RAM > > The last line in .chirp/debug.log reads: > /Users/username/Applications/chirp-daily-20170501.app/Contents/MacOS/../Resources/chirp/chirpw:143: > PangoWarning: Invalid UTF-8 string passed to pango_layout_set_text() >? gtk.main() > > I'm using the osx-pl2303-installer.pkg for my serial driver. This is > currently the only radio for which I have a programming cable. ------------------------------ _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email tochirp_users-unsubscribe(a)intrepid.danplanet.com End of chirp_users Digest, Vol 101, Issue 19 *** ***************************************** -------------- next part -------------- An HTML attachment was scrubbed... URL:http://intrepid.danplanet.com/pipermail/chirp_users/attachments/2017052… ------------------------------ Message: 12 Date: Sat, 20 May 2017 21:28:16 -0500 From: Carrie Jackson <mssjacksonifyournasty(a)gmail.com> Subject: Re: [chirp_users] chirp_users Digest, Vol 101, Issue 19 To: Bob Decker <k7bd(a)yahoo.com>, Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <93a354da-a162-4ad8-a2e4-25a707fed0f1@Spark> Content-Type: text/plain; charset="utf-8" Carrie Jackson liked your e-mail Spark by Readdle(https://itunes.apple.com/app/id997102246?mt=8&uo=4&at=10l6UJ&ct=Spa… Spark by Readdle(https://itunes.apple.com/app/id997102246?mt=8&uo=4&at=10l6UJ&ct=Spa… -------------- next part -------------- An HTML attachment was scrubbed... URL:http://intrepid.danplanet.com/pipermail/chirp_users/attachments/2017 0520/1bba98f9/attachment-0001.html ------------------------------ Message: 13 Date: Sun, 21 May 2017 13:58:24 -0400 From: Joe Puma <theprogramllc(a)yahoo.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <762A954A-D894-4632-A374-F805FE65E9A1(a)yahoo.com> Content-Type: text/plain; charset="us-ascii" Rich do it yourself. Read bottom of email. Sent from my iPhone > On May 20, 2017, at 5:59 PM, Rich Baker <rbakedq(a)gmail.com> wrote: > > Unsubscribe me from this list NOW. > >> On Sat, May 20, 2017 at 3:36 PM, Jim Unroe <rock.unroe(a)gmail.com> wrote: >> On Sat, May 20, 2017 at 11:08 AM, Herb Gerhardt <hgerhardt(a)wavecable.com> wrote: >> > I have been fighting similar problems on Win10 on my Baofeng UV-5R+. I too >> > rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase >> > from HRO to work once I upgraded to Win10. It worked fine on Win7 and never >> > had a problem with the latest driver but would not work on Win10 till I >> > rolled the driver back. I then turned off the auto driver updates for this >> > device. Everything worked fine after rolling the driver back. >> > >> > A few months later when I tried to read the radio again, it would not >> > connect. I checked the driver and it was still the 3.2.0.0 driver in my >> > listing. It took me several days till I updated the driver to the latest >> > driver which of course did not work, but when I rolled it back again the >> > 3.2.0.0 driver from the pick list for this device, it began to work again. >> > Don't ask me what is going on but then set it back for auto updates. I will >> > now just roll the driver back every time I want to use this cable. >> > >> > I suggest you try to update your driver and then roll it back again to >> > 3.2.0.0 to see if that works for you. I know it sounds stupid but it is >> > worth a try since it worked for me. >> > >> > >> > Herb, KB7UVC >> > NW APRS Group, West So und Coordinator >> > Our WEB Site: http://blog.nwaprs.info/ >> >> There is no need to disable updates. If Windows does update your >> Prolific driver, the previous driver is still installed. All you have >> to do is go into Device Manager and re-select the driver version that >> you want to use. I keep several Prolific driver versions installed and >> switch between then at will for testing purposes. >> >> Jim KC9HI >> >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Rich at rbakedq(a)gmail.com >> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com > > > > -- > S. Richard Baker > 250 Furnace Dock Road > Cortlandt Manor, NY 10567 > > Home: 914-736-1350 > Cell: 917-922-2463 > Email: rbakedq(a)gmail.com > _______________________________________________ > chirp_users mailing list > chirp_users@intrep id.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Joe Puma at theprogramllc(a)yahoo.com > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com -------------- next part -------------- An HTML attachment was scrubbed... URL:http://intrepid.danplanet.com/pipermail/chirp_users/attachments/2017052… ec3050d6/attachment-0001.html ------------------------------ Message: 14 Date: Sun, 21 May 2017 13:59:32 -0400 From: Joe Puma <theprogramllc(a)yahoo.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <9FDE6A55-5F80-439E-AFFE-51E5AF484F0D(a)yahoo.com> Content-Type: text/plain; charset="us-ascii" Lol Sent from my iPhone > On May 20, 2017, at 6:06 PM, Jim McCorison <jimmcc(a)mccorison.com> wrote: > > Wow! What a polite request. I just can't try and help you fast enough. > > Not. > > Jim McCorison > Orcas Island, WA > >> On May 20, 2017 , at 2:59 PM, Rich Baker <rbakedq(a)gmail.com> wrote: >> >> Unsubscribe me from this list NOW. >> >>> On Sat, May 20, 2017 at 3:36 PM, Jim Unroe <rock.unroe(a)gmail.com> wrote: >>> On Sat, May 20, 2017 at 11:08 AM, Herb Gerhardt <hgerhardt(a)wavecable.com> wrote: >>> > I have been fighting similar problems on Win10 on my Baofeng UV-5R+. I too >>> > rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase >>> > from HRO to work once I upgraded to Win10. It worked fine on Win7 and never >>> > had a problem with the latest driver but would not work on Win10 till I >>> > rolled the driver back. I then turned off the auto driver updates for this >>> > device. Everything worked fine after rolling the driver back. >>> > >>> > A few months later when I tried to read the radio again, it would not >>> > connect. I checked the driver and it was still the 3.2.0.0 driver in my >>> > listing. It took me several days till I updated the driver to the latest >>> > driver which o f course did not work, but when I rolled it back again the >>> > 3.2.0.0 driver from the pick list for this device, it began to work again. >>> > Don't ask me what is going on but then set it back for auto updates. I will >>> > now just roll the driver back every time I want to use this cable. >>> > >>> > I suggest you try to update your driver and then roll it back again to >>> > 3.2.0.0 to see if that works for you. I know it sounds stupid but it is >>> > worth a try since it worked for me. >>> > >>> > >>> > Herb, KB7UVC >>> > NW APRS Group, West Sound Coordinator >>> > Our WEB Site: http://blog.nwaprs.info/ >>> >>> There is no need to disable updates. If Windows does update your >>> Prolific driver, the previous driver is still installed. All you have >>> to do is go into Device Manager and re-select the driver version that >>> you want to use. I keep several Prolific driver versions installed and >>> switch between then at will for testing purposes. >>> >>> Jim KC9HI >>> >>> _______________________________________________ >>> chirp_users mailing list >>> chirp_users(a)intrepid.danplanet.com >>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>> This message was sent to Rich at rbakedq(a)gmail.com >>> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com >> >> >> >> -- >> S. Richard Baker >> 250 Furnace Dock Road >> Cortlandt Manor, NY 10567 >> >> Home: 914-736-1350 >> Cell: 917-922-2463 >> Email: rbakedq(a)gmail.com >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to K2SON at jimmcc(a)mccorison.com >> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Joe Puma at theprogramllc(a)yahoo.com > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com -------------- next part -------------- An HTML attachment was scrubbed... URL:http://intrepid.danplanet.com/pipermail/chirp_users/attachments/2017052… tachment-0001.html ------------------------------ _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email tochirp_users-unsubscribe(a)intrepid.danplanet.com End of chirp_users Digest, Vol 101, Issue 20 ********************************************_______________________________________________chirp_users mailing listchirp_users@intrepid.danplanet.comhttp://intrepid.danplanet.com/mailman/listinfo/chirp_usersThis message was sent to Glenn at glennervin(a)cableone.netTo unsubscribe, send an email tochirp_users-unsubscribe(a)intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jock at kc6iih(a)aol.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com

1 0

[chirp_users] Cannot read Baofeng BF-888S
by YT9TP - Pedja 21 May '17

21 May '17

I have strange issue with Windows 10, prolific serial adapter and BF-888S. It reports unable to download from radio. Driver is proper (version 3.2.0.0, update is disabled), and Chirp works fine with the same adapter and other radio (Baofeng UV-B5) reading and writing. I tried four different BF-888S and neither can be read. However, when I use the same USB adapter on my old Windows XP computer, Chirp easily reads and writes those BF-888S. Has anyone met with this problem? -- YT9TP, Pedja http://www.yt9tp.iz.rs --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus

15 20

Re: [chirp_users] chirp_users Digest, Vol 101, Issue 19
by Bob Decker 20 May '17

20 May '17

Your method of removal from list did not work. I must cut back mailwh9ch I do not use. Remove my address. The only other way to remove youre-mail by listing it as spam.ThanksBob On Saturday, May 20, 2017 12:00 PM, "chirp_users-request(a)intrepid.danplanet.com" <chirp_users-request(a)intrepid.danplanet.com> wrote: Send chirp_users mailing list submissions to chirp_users(a)intrepid.danplanet.com To subscribe or unsubscribe via the World Wide Web, visit http://intrepid.danplanet.com/mailman/listinfo/chirp_users or, via email, send a message with subject or body 'help' to chirp_users-request(a)intrepid.danplanet.com You can reach the person managing the list at chirp_users-owner(a)intrepid.danplanet.com When replying, please edit your Subject line so it is more specific than "Re: Contents of chirp_users digest..." Today's Topics: 1. RepeaterBook Proximety Not Accurate? (John Kobeck) 2. Re: RepeaterBook Proximety Not Accurate? (Jim Unroe) 3. Re: Cannot read Baofeng BF-888S (Herb Gerhardt) 4. Re: Cannot read Baofeng BF-888S (Amnon Zohar) 5. Re: Cannot read Baofeng BF-888S (Glenn At Home) 6. Leixen VV-898E on MacOS? (was: ...daily-20170501 repeatable crash) (Steve Sergeant) ---------------------------------------------------------------------- Message: 1 Date: Fri, 19 May 2017 23:04:47 -0400 From: John Kobeck <johnkobeck(a)me.com> Subject: [chirp_users] RepeaterBook Proximety Not Accurate? To: chirp_users(a)intrepid.danplanet.com Message-ID: <5F40902E-156A-415A-B687-A0118642A496(a)me.com> Content-Type: text/plain; charset=utf-8 Hello Chirpers; I have a question. I am trying to program repeaters into a Kenwood TMV7. I have been using RepeaterBooks Proximity search. When setting a Manhattan zip code for example, it doesn?t seem to matter if I indicate a 100 mile radius or a 300 mile radius. It only seems pull about a 15 miles radius. Is there a default that won?t allow a larger range? 73s KC2MPG ------------------------------ Message: 2 Date: Sat, 20 May 2017 05:48:35 -0400 From: Jim Unroe <rock.unroe(a)gmail.com> Subject: Re: [chirp_users] RepeaterBook Proximety Not Accurate? To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <CADnO8U7LPAPZM6s2Y6mtYQd1qz+t+QNJR9xDXG_AAX2kbBvqug(a)mail.gmail.com> Content-Type: text/plain; charset="UTF-8" On Fri, May 19, 2017 at 11:04 PM, John Kobeck <johnkobeck(a)me.com> wrote: > > Hello Chirpers; > > I have a question. I am trying to program repeaters into a Kenwood TMV7. I have been using RepeaterBooks Proximity search. When setting a Manhattan zip code for example, it doesn?t seem to matter if I indicate a 100 mile radius or a 300 mile radius. It only seems pull about a 15 miles radius. Is there a default that won?t allow a larger range? > > 73s > KC2MPG Using "Import from data source", "Location" = 10001 and "Band" = "2 meters (144MHz)", I the following numbers of repeaters are retrieved. Distance: # of repeaters 15: 50 100: 367 300: 1387 Jim KC9HI ------------------------------ Message: 3 Date: Sat, 20 May 2017 08:08:14 -0700 From: "Herb Gerhardt" <hgerhardt(a)wavecable.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: "'Discussion of CHIRP'" <chirp_users(a)intrepid.danplanet.com> Message-ID: <001301d2d17a$e7936ea0$b6ba4be0$@com> Content-Type: text/plain; charset="us-ascii" I have been fighting similar problems on Win10 on my Baofeng UV-5R+. I too rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase from HRO to work once I upgraded to Win10. It worked fine on Win7 and never had a problem with the latest driver but would not work on Win10 till I rolled the driver back. I then turned off the auto driver updates for this device. Everything worked fine after rolling the driver back. A few months later when I tried to read the radio again, it would not connect. I checked the driver and it was still the 3.2.0.0 driver in my listing. It took me several days till I updated the driver to the latest driver which of course did not work, but when I rolled it back again the 3.2.0.0 driver from the pick list for this device, it began to work again. Don't ask me what is going on but then set it back for auto updates. I will now just roll the driver back every time I want to use this cable. I suggest you try to update your driver and then roll it back again to 3.2.0.0 to see if that works for you. I know it sounds stupid but it is worth a try since it worked for me. Herb, KB7UVC NW APRS Group, West Sound Coordinator Our WEB Site: http://blog.nwaprs.info/ -----Original Message----- From: chirp_users-bounces(a)intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of YT9TP - Pedja Sent: Friday, May 19, 2017 1:08 AM To: chirp_users(a)intrepid.danplanet.com Subject: [chirp_users] Cannot read Baofeng BF-888S I have strange issue with Windows 10, prolific serial adapter and BF-888S. It reports unable to download from radio. Driver is proper (version 3.2.0.0, update is disabled), and Chirp works fine with the same adapter and other radio (Baofeng UV-B5) reading and writing. I tried four different BF-888S and neither can be read. However, when I use the same USB adapter on my old Windows XP computer, Chirp easily reads and writes those BF-888S. Has anyone met with this problem? -- YT9TP, Pedja http://www.yt9tp.iz.rs --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus ------------------------------ Message: 4 Date: Sat, 20 May 2017 18:23:30 +0300 From: Amnon Zohar <amnon.zohar(a)gmail.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <CAN5HzcQAXwM2rBUjdtwkMCOb7_XfsmQ6PgMSqsc5M4B0i19F-A(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" I guess some update of win10 change some part of the driver without changing the driver version number. Redowngrading probably fix this. But this just a wild guess. The solution is important. The reason is less important ?????? 20 ???? 2017 18:09,? "Herb Gerhardt" <hgerhardt(a)wavecable.com> ???: > I have been fighting similar problems on Win10 on my Baofeng UV-5R+. I too > rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase > from HRO to work once I upgraded to Win10. It worked fine on Win7 and > never > had a problem with the latest driver but would not work on Win10 till I > rolled the driver back. I then turned off the auto driver updates for this > device. Everything worked fine after rolling the driver back. > > A few months later when I tried to read the radio again, it would not > connect. I checked the driver and it was still the 3.2.0.0 driver in my > listing. It took me several days till I updated the driver to the latest > driver which of course did not work, but when I rolled it back again the > 3.2.0.0 driver from the pick list for this device, it began to work again. > Don't ask me what is going on but then set it back for auto updates. I > will > now just roll the driver back every time I want to use this cable. > > I suggest you try to update your driver and then roll it back again to > 3.2.0.0 to see if that works for you. I know it sounds stupid but it is > worth a try since it worked for me. > > > Herb, KB7UVC > NW APRS Group, West Sound Coordinator > Our WEB Site: http://blog.nwaprs.info/ > > > > > > -----Original Message----- > From: chirp_users-bounces(a)intrepid.danplanet.com > [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of YT9TP - > Pedja > Sent: Friday, May 19, 2017 1:08 AM > To: chirp_users(a)intrepid.danplanet.com > Subject: [chirp_users] Cannot read Baofeng BF-888S > > I have strange issue with Windows 10, prolific serial adapter and BF-888S. > It reports unable to download from radio. > > Driver is proper (version 3.2.0.0, update is disabled), and Chirp works > fine > with the same adapter and other radio (Baofeng UV-B5) reading and writing. > > I tried four different BF-888S and neither can be read. > > However, when I use the same USB adapter on my old Windows XP computer, > Chirp easily reads and writes those BF-888S. > > Has anyone met with this problem? > > -- > > YT9TP, Pedja > http://www.yt9tp.iz.rs > > > > --- > This email has been checked for viruses by Avast antivirus software. > https://www.avast.com/antivirus > > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to amnon at amnon.zohar(a)gmail.com > To unsubscribe, send an email to chirp_users-unsubscribe@ > intrepid.danplanet.com >

2 1