October 2016 - Users - lists.chirpmyradio.com

Re: [chirp_users] leixen 898s
by Thom LaCosta 11 Oct '16

11 Oct '16

> >CHIRP is not compatible with the v105 radios. The channel layout in >memory is quite different. There is an open issue looking into it. Thanks...hope you can support it....your software is so much better than the factory stuff. 73, k3hrn

2 1

[chirp_users] leixen 898s
by Thom LaCosta 11 Oct '16

11 Oct '16

Just received a leixen 898s....radio is labeled as v105, but the factory software that works is for v107...http://leixen.com/others/VV898S_USER_V107.rar The latest daily build of chirp does not seem to support this new version.

2 1

[chirp_users] Zastone ZT D9000
by Toby Nivens 10 Oct '16

10 Oct '16

Hello, Has there been an build for the new Zastone ZT D9000? Thanks, Toby -------------------------------------------- On Mon, 10/10/16, Build System <donotreply(a)danplanet.com> wrote: Subject: [chirp_users] New Daily Build To: chirp_users(a)intrepid.danplanet.com Date: Monday, October 10, 2016, 2:13 AM Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20161010 A list of the changes included in this build (since the last daily) follows: Changes for Build #441 [Jim Unroe <rock.unroe(a)gmail.com>] [New Model] BTech GMRS-UV1 This patch adds support for the BTech GMRS-UV1 #4119 [Dan Smith <dsmith(a)danplanet.com>] Make tests check validate_memory() This makes the BruteForce test check validate_memory() before trying to set it in the radio and subsequently failing. If a radio doesn't validate a memory it may have some weird requirements. Also, make the edges test try to use the first mode out of the valid_modes list instead of the default 'FM'. Related to issue #4119 -----Inline Attachment Follows----- _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to KD5TN at mexiaflash(a)yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com

1 0

[chirp_users] New Daily Build
by Build System 10 Oct '16

10 Oct '16

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20161010 A list of the changes included in this build (since the last daily) follows: Changes for Build #441 [Jim Unroe <rock.unroe(a)gmail.com>] [New Model] BTech GMRS-UV1 This patch adds support for the BTech GMRS-UV1 #4119 [Dan Smith <dsmith(a)danplanet.com>] Make tests check validate_memory() This makes the BruteForce test check validate_memory() before trying to set it in the radio and subsequently failing. If a radio doesn't validate a memory it may have some weird requirements. Also, make the edges test try to use the first mode out of the valid_modes list instead of the default 'FM'. Related to issue #4119

1 0

[chirp_users] Windows 10 Pro Anniversary Edition Locks Up
by jgoods19＠gmail.com 08 Oct '16

08 Oct '16

I just installed the Win10 Pro Anniversary update. Now when I try to save a *.img or *.csv file, Chirp locks up. I have to use Ctl-Alt-Delete to close Chirp out. I uninstalled Chirp and reinstalled the latest version and the problem remains/ Any ideas? THX Sent from Mail for Windows 10

3 2

[chirp_users] 6431998aa4b400b58a14de5453a74e06fbf3ec57
by Edward Van Prooyen 06 Oct '16

06 Oct '16

1 0

[chirp_users] New Daily Build
by Build System 05 Oct '16

05 Oct '16

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20161005 A list of the changes included in this build (since the last daily) follows: Changes for Build #440 [Jim Unroe <rock.unroe(a)gmail.com>] [QYT KT-8900] Add Support for a New MCU-Version This patch adds support for a newly discovered MCU-Version for QYT KT-8900 and variants like the Juentai JT-6188 Mini. related to #4101

4 4

[chirp_users] New Daily Build
by Build System 04 Oct '16

04 Oct '16

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20161004 A list of the changes included in this build (since the last daily) follows: Changes for Build #439 [Jim Unroe <rock.unroe(a)gmail.com>] [QYT KT-8900R] Add Support for a New MCU-Version This patch adds support for a newly discovered MCU-Version Feature #4099

1 0

[chirp_users] New Daily Build
by Build System 03 Oct '16

03 Oct '16

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20160830 A list of the changes included in this build (since the last daily) follows: Changes for Build #427 [Dave Allan <danplanet(a)dpallan.com>] Remove spurious newline causing stock config import error. Fixes #3743 [Adam Coddington <me(a)adamcoddington.net>] [icomciv] Add support for IC-7100. Fixes #1003 This is largely just an updated version of Nick Partofthething's (accounts(a)partofthething.com) original patch posted on 12 July 2015. [Pavel Milanes (CO7WT) <pavelmc(a)gmail.com>] [PATCH][tk-760g.py] Add the Kenwood Serie 60G UHF HTs, fixes #3487 As per an user request, added the following HT for the Kenwood Series 60G: TK-360G/370G/372G/378G/388G The band limits are widened, please note the notice in the experimental popup text. 73 Pavel CO7WT [Brian Dickman <brian.maybe(a)gmail.com>] [wouxun] Prevent KGUVD1PRadio driver from over-matching on leixen 898S images (copy from same fix on KG816, in preparation for leixen 898S driver and image), fixes #3947 The KGUVD1 match isn't very discriminate; basically any 8k image with lots of 0xff toward the end could match. This copies the filter used in the KG816 driver. Specifically the driver was matching to the 898S test image that will be added shortly, and this fixes it, but other users could run into the problem as well. [Jim Unroe <rock.unroe(a)gmail.com>] [UV-6R] Adjust Channel Name Length Most other Baofeng radios of this type support 7 character channel names. It was reported that the UV-6R only supports 6 chararacter channel names. This patch adjusts the name length to 6 characters. related to #2761 [Jim Unroe <rock.unroe(a)gmail.com>] [UV-5X3] Fix Inverted Power Levels Somehow I got the order of the power levels swapped. This patch puts them in the proper order. related to #3931 [Jim Unroe <rock.unroe(a)gmail.com>] [UV-6R] Fix Inverted Power Levels Somehow I got the order of the power levels swapped. This patch puts them in the proper order. related to #2761

4 3

Re: [chirp_users] Error trying to access radioreference.com
by John Schubert 01 Oct '16

01 Oct '16

On Wed, 28 Sep 2016 19:17:12 -0700, I wrote: > Hi, > I have recently updated to El Capitan and am no having problems trying to access > radioreference.com from Chirp. I reinstalled KK7DS Python runtime for Mac OSX > and then updated CHIRP to daily-20160926. The error I get is: > > "Suds library required for RadioReference.com import. > Try installing your distribution's python-suds package." I solved the problem... The list suggestions & web info didn't work, but helped with clues and likely distracted me to use my python. I ended up changing chirp to use my MacPorts python. I did a clean install on a different [Mavericks] system to eliminate any potential left over collateral. I then applied the same changes to my El Capitan MacBook to verify... For those the feel adventurous: 1) edit chirp (/Applications/Chirp.app/Contents/MacOS/chirp): ## PYTHON=/opt/kk7ds//Library/Frameworks/Python.framework/Versions/2.7/Resources/Python.app/Contents/MacOS/Python PYTHON=/opt/local/Library/Frameworks/Python.framework/Versions/2.7/Resources/Python.app/Contents/MacOS/Python you may need to adjust the path to match your python & chirp installation. 2) If chirp was previously installed, otherwise skip: a) rename or delete /opt/kk7ds b) delete soft link /Applications/Chirp.app/Contents/MacOS/../CHIRP 3) install any missing python modules (example for MacPorts): sudo port install py-serial py27-pygtk py-suds Run will open X Windows (XQuartz)... 73 John

1 0